GOST
4 May 2015, 18:23
http://zevtechnologies.com/ZEV-17-Dimple-RAW.jpg
ZEV Technologies Match Grade drop-in barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was orginally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.0002” for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
Available finishes:
Raw Stainless Steel
Black DLC (Diamond-Like Carbon)
Burnt Bronze
http://zevtechnologies.com/BBL-17-D-DLC_1-image.jpg
http://zevtechnologies.com/BBL-17-D-BRZ_1-image.jpg
Barrel Specs:
416R Gun Barrel Quality Stainless Steel
Match Grade drop in barrel
Final dimension of +/- 0.0002” for consistency and accuracy
SAAMI spec. Match chambers
Proprietary twist rate
Note: Model specific
Now available at Rainier Arms:
http://www.rainierarms.com/catalogsearch/result/?cat=0&q=Zev+match+grade+barrel
ZEV Technologies Match Grade drop-in barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was orginally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.0002” for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
Available finishes:
Raw Stainless Steel
Black DLC (Diamond-Like Carbon)
Burnt Bronze
http://zevtechnologies.com/BBL-17-D-DLC_1-image.jpg
http://zevtechnologies.com/BBL-17-D-BRZ_1-image.jpg
Barrel Specs:
416R Gun Barrel Quality Stainless Steel
Match Grade drop in barrel
Final dimension of +/- 0.0002” for consistency and accuracy
SAAMI spec. Match chambers
Proprietary twist rate
Note: Model specific
Now available at Rainier Arms:
http://www.rainierarms.com/catalogsearch/result/?cat=0&q=Zev+match+grade+barrel