PDA

View Full Version : CMT/WEVO Branded Lower Billet Receiver



Pages : [1] 2

UWone77
6 August 2015, 13:00
I'll update this thread later today with some pictures of the sample.

Please post if you are "in" as in... interested in purchasing one, and specify if you just want a Lower only or a matching Upper/Lower Set.

This is not a commitment to buy, no money is being collected or solicited. I just want a rough estimate of how many sets vs lowers only we would need. This will likely be a one time run.

Pricing is not set in stone, but I'd look at currently CMT Billet pricing as a rough guide. If we do uppers, those may also be engraved with the standard WEVO Logo.

Thanks to all for your patience on this project.


http://i1016.photobucket.com/albums/af282/richdkim77/0Qok0B6O3AoctirZs9b5uQRvmaNf4zPcF7Uro5Iyfcg_zpslj5 ypomp.jpg (http://s1016.photobucket.com/user/richdkim77/media/0Qok0B6O3AoctirZs9b5uQRvmaNf4zPcF7Uro5Iyfcg_zpslj5 ypomp.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/NBzHq3Qk4B57Bxm0a22YM-XzlyC0aiTycSwka6xBzUc_zpsokglcteu.jpg (http://s1016.photobucket.com/user/richdkim77/media/NBzHq3Qk4B57Bxm0a22YM-XzlyC0aiTycSwka6xBzUc_zpsokglcteu.jpg.html)

Joelski
6 August 2015, 13:02
I'll burn number one!

In for a set.

Edit: was under the impression it would be the standard WEVO logo. Gonna have to pass on the kitty.

gatordev
6 August 2015, 13:08
Is this the same lower with the yet-to-be-determined roll mark (grenade cat vs WEVO logo)?

velocity2006
6 August 2015, 13:16
In for a lower for sure, but possibly for a set if I can find the funds. Are they the RA Mod3's or CMTs? Option of paying more for custom serial?

Dstrbdmedic167
6 August 2015, 13:35
Lower

UWone77
6 August 2015, 13:41
Is this the same lower with the yet-to-be-determined roll mark (grenade cat vs WEVO logo)?

Fortunately or UN... it's the cat logo.

nijikon84
6 August 2015, 15:35
In for a combo upper/lower.

Ride4frnt
6 August 2015, 15:39
I'd love to say I'm in but with the move it all depends on funds. Would like to now that I'll be in a state where I can have it...

Thompson
6 August 2015, 16:28
UW - would you have the slightest as to when the release date is?

I'd like to grab a set, but it all depends on the timing. If it's within the next couple weeks - no; but if it's in a couple months down the road - yes. ... and depending on how the rollmark turns out.

SINNER
6 August 2015, 17:45
At least 1 complete set or 2 lowers.

mustangfreek
7 August 2015, 04:17
...Want....[BD]

Okay..Now i'll ask it again..dont burn me too bad.......Ever a chance of a run of WEVO lowers on a forged lower/set..Something like the RA lower with the blank side would be a perfect canvas....

....[pop]....[:D]

SINNER
7 August 2015, 05:25
Probably be easier to get a vector file of the logo and just send it off to Ident or some other engraver to do a forged one. Think it's around $75 for a logo to be engraved.

UWone77
7 August 2015, 10:01
OP Updated with pictures.

Thanks to Chummerz at RA for the pics.

velocity2006
7 August 2015, 10:04
Yeah in for sure on one. They turned out really nice. Not quite as deep of a engraving as I had hoped for but still very nice.

GOST
7 August 2015, 10:05
Those turned out looking better than I anticipated.

Dstrbdmedic167
7 August 2015, 10:14
I like it! Does look pretty good

Pyzik
7 August 2015, 10:22
Crossing my fingers things work out for me to grab one!

toolboxluis00200
7 August 2015, 10:27
Wow



I know I won't be able to get one. But dame that is a killer lower it wood have look awesome on the 300blk :P

jonpac07
7 August 2015, 10:35
I'm in for a Set

GOST
7 August 2015, 12:38
I think these would look great with a forged upper. Would be nice to see them offered as matched sets with Rainier Arms forged uppers also.

WarEagle
7 August 2015, 13:14
In. Lower

GOST
7 August 2015, 15:10
Here's you another pic from Chummerz.

https://scontent-atl1-1.xx.fbcdn.net/hphotos-xtp1/t31.0-8/11705818_409234399284954_1429761288012305935_o.jpg ?efg=eyJpIjoidCJ9

GOST
7 August 2015, 15:12
For those of you who haven't had your hands on a Rainier Arms Mod 3 Ultramatch receiver set you won't be disappointed.

Jerry R
8 August 2015, 09:43
Without a commitment, I am in for a set - timeline will determine funding.

Mecha_Arms
8 August 2015, 12:25
I'm in for a set, depending on the final price. At a minimum I'll get the lower.

gatordev
8 August 2015, 15:24
I'm in for a lower, but like Jerry, timing will affect things. I can't really justify buying another set, though.

toolboxluis00200
8 August 2015, 16:52
What other side looks like

Battle Cock
8 August 2015, 16:57
UW - would you have the slightest as to when the release date is?

I'd like to grab a set, but it all depends on the timing. If it's within the next couple weeks - no; but if it's in a couple months down the road - yes. ... and depending on how the rollmark turns out.
I'm on a similiar affordability timeline.


For those of you who haven't had your hands on a Rainier Arms Mod 3 Ultramatch receiver set you won't be disappointed.
I've got a RA Ultramatch Mod2 upper thats currently mated with a forged lower. Any idea where I could find pictures of a RA Ultramatch Mod 2 upper mated with a CMT billet lower? If it ain't fuggly then Battle Cock is in for on Battle Cat lower.

Dstrbdmedic167
8 August 2015, 17:06
Any idea where I could find pictures of a RA Ultramatch Mod 2 upper mated with a CMT billet lower? If it ain't fuggly then Battle Cock is in for on Battle Cat lower.

I'm sure someone around here can fill that request.

DutyUse
8 August 2015, 17:29
I'm in for a set

GOST
8 August 2015, 18:16
I've got a RA Ultramatch Mod2 upper thats currently mated with a forged lower. Any idea where I could find pictures of a RA Ultramatch Mod 2 upper mated with a CMT billet lower? If it ain't fuggly then Battle Cock is in for on Battle Cat lower.
The WEVO lower is on a Rainier Arms Ultramatch Mod 3. I may be incorrect but believe that the Mod 2 & 3 upper receivers are the same.

Dstrbdmedic167
8 August 2015, 18:22
The WEVO lower is on a Rainier Arms Ultramatch Mod 3. I may be incorrect but believe that the Mod 2 & 3 upper receivers are the same.

I have both and I can't tell any difference in them if there is any...

Battle Cock
8 August 2015, 18:37
The WEVO lower is on a Rainier Arms Ultramatch Mod 3. I may be incorrect but believe that the Mod 2 & 3 upper receivers are the same.

Sold!

SwissyJim
8 August 2015, 19:58
In for a set, determined by timeline and pricing..

Soisauss
8 August 2015, 20:22
I'm in for a set!

UWone77
8 August 2015, 20:23
What other side looks like

Standard Rainier Arms Mod 3 markings.

toolboxluis00200
8 August 2015, 20:50
Standard Rainier Arms Mod 3 markings.

OK thanks you

mustangfreek
9 August 2015, 02:18
Probably be easier to get a vector file of the logo and just send it off to Ident or some other engraver to do a forged one. Think it's around $75 for a logo to be engraved.

Well it wouldnt be easier..easier would be just paying for it already done..lol...

SINNER
9 August 2015, 11:09
Well it wouldnt be easier..easier would be just paying for it already done..lol...

I meant easier for us so you will stop asking about a forged one. LMFAO

mustangfreek
10 August 2015, 05:09
I meant easier for us so you will stop asking about a forged one. LMFAO

Lol.....[BD]

Can i ask this......[:D].....pic of this lower with a forged upper on it?

Would like to see what it looks like...Thanks and im a maybe, depending on my $$ situation, how much they are, what one looks like with a forged upper on it...When $$ needs to be collected..My $$ situation......

Mecha_Arms
10 August 2015, 12:00
For folks who are local, can we pick these up at Rainier Arms and avoid the extra FFL transfer fee?

GOST
10 August 2015, 12:39
Can i ask this......[:D].....pic of this lower with a forged upper on it?

Would like to see what it looks like...Thanks and im a maybe, depending on my $$ situation, how much they are, what one looks like with a forged upper on it...When $$ needs to be collected..My $$ situation......

Here are OfficerX's pics from another thread of a maybe a Mod 2 lower with a forged upper. I think the only difference between the Mod 2 and Mod 3 is the ambi mag release, so it should look pretty close. I think it looks really good with the forged upper.

http://i1195.photobucket.com/albums/aa393/officerfrasher/3A7A3B42-F4ED-47BF-B933-08D43C847708_zpsx74izojb.jpg
http://i1195.photobucket.com/albums/aa393/officerfrasher/FE32FE3B-326D-469E-A017-CC4E7380FF0C_zpst6tekqyu.jpg

din
12 August 2015, 00:07
I'm in for a set, pending timeline.

mustangfreek
14 August 2015, 02:00
Here are OfficerX's pics from another thread of a maybe a Mod 2 lower with a forged upper. I think the only difference between the Mod 2 and Mod 3 is the ambi mag release, so it should look pretty close. I think it looks really good with the forged upper.

Thanks gost looks alright with the forged upper, not like i really needed help, but thanx.....[:D]

Put the Wevo Ginger down for a lower....

Edit:Cant do it..

Farmhouse812
14 August 2015, 05:48
in for a set

UWone77
18 August 2015, 19:10
Ok,

So we're just going to do lowers. Much like the Trijicon List, post if you're in. For those that wanted a matching upper, the Rainier UltraMatch upper is a perfect fit, as the other side of the Lower Receiver has the RA markings.

1.
2.
3.

ect... looks like we'll get roughly 20 allocated.

Price is $227.95, which is 5% less than a standard Mod 3 Ambi Lower Receiver.

Timeline approximately 2 weeks after commitments are made.

toolboxluis00200
18 August 2015, 19:30
So who is going to spot me $300. :[BD]

din
18 August 2015, 20:14
I am in for one!

UWone77
18 August 2015, 20:21
I am in for one!

1. din
2.
3.
4.
5.

Dstrbdmedic167
18 August 2015, 20:49
1. din
2.Dstrbdmedic167
3.
4.
5.

SINNER
18 August 2015, 23:55
1. din
2.Dstrbdmedic167
3.SINNER
4.
5.

I am in for at least 1. If there is a surplus left after everyone commits likely 2.

mustangfreek
19 August 2015, 01:02
Well got excited for a whole few days, til i was reminded it's school time in a few =clothes,shoes,supplies-sorts stuff-2 boys, plus a plethora of other crap im going thru..So im out....You guys have fun..

GOST
19 August 2015, 01:46
Well got excited for a whole few days, til i was reminded it's school time in a few =clothes,shoes,supplies-sorts stuff-2 boys, plus a plethora of other crap im going thru..So im out....You guys have fun..

Same here brother, except for girls. I also went and paid for the Wife's anniversary gift yesterday.

din
19 August 2015, 03:16
Same here brother, except for girls. I also went and paid for the Wife's anniversary gift yesterday.

Totally off topic, but how many years, and what did you get her?

GOST
19 August 2015, 03:34
10 years and new diamond enhancement bands for her ring.

din
19 August 2015, 03:44
10 years and new diamond enhancement bands for her ring.

Awesome, congrats!

voodoo_man
19 August 2015, 06:03
Between this and the mco rainier might as well take all my money....

velocity2006
19 August 2015, 07:13
In for sure.

UWone77
19 August 2015, 11:24
I talked to John, and he's just going to make an initial run of 20. When they sell, they'll sell. If you're on the list here, you'll get first crack. Any left overs will be put on the website to purchase at your leisure, unless they sell out of course. [:D]

toolboxluis00200
19 August 2015, 11:35
Maybe john will take some of my comics. [BD]

toolboxluis00200
19 August 2015, 11:36
10 years and new diamond enhancement bands for her ring.

Congrats

voodoo_man
19 August 2015, 12:58
1. din
2.Dstrbdmedic167
3.SINNER
4. voodoo_man
5.

velocity2006
19 August 2015, 13:05
1. din
2.Dstrbdmedic167
3.SINNER
4. voodoo_man
5. velocity2006
6.

UWone77
19 August 2015, 13:18
Maybe john will take some of my comics. [BD]

LOL... luis if you had one, what would you turn it into?

toolboxluis00200
19 August 2015, 13:36
LOL... luis if you had one, what would you turn it into?

In to a pistol so ones I build my WEVO300BLK upper it can go on it :P

voodoo_man
19 August 2015, 13:39
Can we get these custom engraved? ;)

toolboxluis00200
19 August 2015, 14:30
Can we get these custom engraved? ;)

That will be awesome if they can do that

Jerry R
19 August 2015, 15:06
I'm in for one.

UWone77
19 August 2015, 15:27
Can we get these custom engraved? ;)

With?

SINNER
19 August 2015, 15:48
With?

"Tested and endorsed by voodoo_man"

toolboxluis00200
19 August 2015, 15:52
"Tested and endorsed by voodoo_man"

Lol

voodoo_man
19 August 2015, 16:16
If possible (just throwing it out there) trust inscription?



"Tested and endorsed by voodoo_man"

That would be a stamp of approval worth something....

UWone77
19 August 2015, 16:34
If possible (just throwing it out there) trust inscription?




That would be a stamp of approval worth something....

Send me a PM of what needs to be on it. I'll see what I can do.

UWone77
19 August 2015, 16:35
"Tested and endorsed by VD Man...

Fixed it

toolboxluis00200
19 August 2015, 16:42
That wood be cool to add the trust info on a lower. But my info is to long
That is why I like lowers whit at list one side of the magwell to be blank

SINNER
19 August 2015, 16:45
That would be a stamp of approval worth something....

Well at least we know your not a motorcycle cop. No way your head would fit in a helmet. LMAO

nijikon84
19 August 2015, 17:10
UWone,

Would Rainier be able to combo a Mod3 Upper? I only see the Mod2s for sale.

UWone77
19 August 2015, 17:12
UWone,

Would Rainier be able to combo a Mod3 Upper? I only see the Mod2s for sale.

I believe Mod 2 and 3 uppers are the same.

nijikon84
20 August 2015, 09:15
Sounds good.

I'm in for a lower.

voodoo_man
20 August 2015, 10:09
Well at least we know your not a motorcycle cop. No way your head would fit in a helmet. LMAO

Wouldn't ride a wheel if they paid me.

UWone77
20 August 2015, 10:17
Wouldn't ride a wheel if they paid me.

Worst Job in LE IMHO.

SINNER
20 August 2015, 10:54
I would think bicycle duty would be worse. We have a large amount of those around Bmore

And a shout out to VD man. I actually spent some time checking out your website last night. You do a very good job on your reviews. The SCAR products were spot on.

voodoo_man
20 August 2015, 10:58
I did bicycle for a bit good work just annoying because you cant get to a lot of places for the fun stuff.


I would think bicycle duty would be worse. We have a large amount of those around Bmore

And a shout out to VD man. I actually spent some time checking out your website last night. You do a very good job on your reviews. The SCAR products were spot on.

Thanks brother.

toolboxluis00200
20 August 2015, 12:21
Wouldn't ride a wheel if they paid me.
https://youtu.be/D5-bD372v5 . Just for u VD. [BD]

voodoo_man
20 August 2015, 13:21
https://youtu.be/D5-bD372v5 . Just for u VD. [BD]

doesn't exist?

toolboxluis00200
20 August 2015, 14:56
doesn't exist?
https://youtu.be/VYKdayl7BHM
OK try know

voodoo_man
20 August 2015, 15:04
https://youtu.be/VYKdayl7BHM
OK try know

lol

UWone77
21 August 2015, 06:42
Here's a few more from Chummerz.

If anyone was wondering, there is the standard Rainier Arms Logo on the other side, like your standard Mod 3

http://i1016.photobucket.com/albums/af282/richdkim77/a6b__V7dyjqFL702PMwv0h_I6aEuVDJuH8zUxNGKNSg_zps3jm luepm.jpg (http://s1016.photobucket.com/user/richdkim77/media/a6b__V7dyjqFL702PMwv0h_I6aEuVDJuH8zUxNGKNSg_zps3jm luepm.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/xyp_s7aYdsxg1SVJDfnbzv8yk5oAS7g55MKXMfn9liU_zpstg0 bjxus.jpg (http://s1016.photobucket.com/user/richdkim77/media/xyp_s7aYdsxg1SVJDfnbzv8yk5oAS7g55MKXMfn9liU_zpstg0 bjxus.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/o6SQDPIYCNGVKJqEToWh5F5EgNreB5d0jioRC2me7rc_zpsef4 p2kjs.jpg (http://s1016.photobucket.com/user/richdkim77/media/o6SQDPIYCNGVKJqEToWh5F5EgNreB5d0jioRC2me7rc_zpsef4 p2kjs.jpg.html)

Mecha_Arms
21 August 2015, 06:47
I'm in for a lower.

Hopefully there will be a sale on the upper receivers during the Summer Blast...

toolboxluis00200
21 August 2015, 09:45
Here's a few more from Chummerz.

If anyone was wondering, there is the standard Rainier Arms Logo on the other side, like your standard Mod 3

http://i1016.photobucket.com/albums/af282/richdkim77/a6b__V7dyjqFL702PMwv0h_I6aEuVDJuH8zUxNGKNSg_zps3jm luepm.jpg (http://s1016.photobucket.com/user/richdkim77/media/a6b__V7dyjqFL702PMwv0h_I6aEuVDJuH8zUxNGKNSg_zps3jm luepm.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/xyp_s7aYdsxg1SVJDfnbzv8yk5oAS7g55MKXMfn9liU_zpstg0 bjxus.jpg (http://s1016.photobucket.com/user/richdkim77/media/xyp_s7aYdsxg1SVJDfnbzv8yk5oAS7g55MKXMfn9liU_zpstg0 bjxus.jpg.html)
http://i1016.photobucket.com/albums/af282/richdkim77/o6SQDPIYCNGVKJqEToWh5F5EgNreB5d0jioRC2me7rc_zpsef4 p2kjs.jpg (http://s1016.photobucket.com/user/richdkim77/media/o6SQDPIYCNGVKJqEToWh5F5EgNreB5d0jioRC2me7rc_zpsef4 p2kjs.jpg.html)

http://www.eastsidepatch.com/wp-content/uploads/2010/11/drooling_homer1171825378-261x300.gif

Farva
21 August 2015, 20:27
Hope it's not too late but Id be in for a set as well.

Farva
21 August 2015, 20:37
1. din
2.Dstrbdmedic167
3.SINNER
4. voodoo_man
5. velocity2006
6. Farva
7.

din
21 August 2015, 21:11
Amended to include everyone who wants in so far. This update is based on the list that U-dub started in post #49, so if you already said you're in and not on the list, please go ahead and tag your name onto it so we don't miss anybody.

1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

UWone77
21 August 2015, 22:49
20 went to anodizing. Should be back in 2 weeks.


http://i849.photobucket.com/albums/ab55/UWone77/cat%20lwr_zpsye6aznsf.jpg (http://s849.photobucket.com/user/UWone77/media/cat%20lwr_zpsye6aznsf.jpg.html)

Mecha_Arms
21 August 2015, 23:30
20 went to anodizing. Should be back in 2 weeks.


http://i849.photobucket.com/albums/ab55/UWone77/cat%20lwr_zpsye6aznsf.jpg (http://s849.photobucket.com/user/UWone77/media/cat%20lwr_zpsye6aznsf.jpg.html)

They look awesome without the anodize.

Perhaps I might need to look into getting a white cerakote on this...I don't really know what I'm going to do with mine.

din
22 August 2015, 02:43
Those look amazing.

mustangfreek
22 August 2015, 03:21
Nice..

Farva
22 August 2015, 07:36
Those are absolutely stunning! Battle cat for the win!

toolboxluis00200
22 August 2015, 08:55
20 went to anodizing. Should be back in 2 weeks.


http://i849.photobucket.com/albums/ab55/UWone77/cat%20lwr_zpsye6aznsf.jpg (http://s849.photobucket.com/user/UWone77/media/cat%20lwr_zpsye6aznsf.jpg.html)

Man dose look killer

Dstrbdmedic167
22 August 2015, 09:17
I'd really love to have one in the white just as it is... Clear that kitty and call it a day!

voodoo_man
22 August 2015, 11:26
...can I get a serial number so I can put the atf to work?

Farva
22 August 2015, 22:53
Second that ^

SFP Tactical
22 August 2015, 23:03
I'm in for this! Money standing aside :)


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

din
23 August 2015, 02:29
Updated. Halfway there!

1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10. SFP Tactical
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

Farva
23 August 2015, 08:24
I'm gitty like a school girl over these! I want to see someone do a hello kitty themed build with one of these [BD]

UWone77
23 August 2015, 09:29
Updated. Halfway there!

1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10. SFP Tactical
11.
12.
13.
14.
15.
16.
17.
18.
19. Ron (from High Velocity Arms)
20.

Updated

GOST
23 August 2015, 09:51
I want to see someone do a hello kitty themed build with one of these [BD]

No

Ride4frnt
23 August 2015, 10:24
Ugh...

Dstrbdmedic167
23 August 2015, 10:27
I want to see someone do a hello kitty themed build with one of these [BD]

http://images.tapatalk-cdn.com/15/08/23/0db8b2cd86fa57aae8e82b68275ba110.jpg

Farva
23 August 2015, 10:28
Haha where's your sense of adventure?... Your right I'm sorry I mentioned it lol

toolboxluis00200
23 August 2015, 11:29
I'm gitty like a school girl over these! I want to see someone do a hello kitty themed build with one of these [BD]

https://i.minus.com/iPAmTUqa483CP.gif

din
29 August 2015, 20:55
Now the serial numbers on these are all going to start with MEOW, right?



...MEOW!

UWone77
29 August 2015, 23:25
Now the serial numbers on these are all going to start with MEOW, right?



...MEOW!

Sorry, they are just a continuation of existing RA Mod 3 serials. I believe they are high 600's in this run.

dgod
31 August 2015, 05:30
I am interested as well, Lower at minimum, would ask if Special Serial Number is Available? And potentially the whole Package.

Thanks

Dan

Thompson
31 August 2015, 10:12
I am interested as well, Lower at minimum, would ask if Special Serial Number is Available? And potentially the whole Package.

Thanks

Dan
... see post #113.

Ride4frnt
31 August 2015, 15:06
Do we have a date on these yet. I can't commit to one right now because I won't buy another one while I'm in MD. If one would happen to be available when I move (end of September) then I may be able to swing it.

SINNER
31 August 2015, 15:26
Why would you not buy one living in MD?

Ride4frnt
31 August 2015, 16:39
Why would you not buy one living in MD?

Not going through the hassle of the paperwork and fees just to have to transfer it to WV when i move in less than a month.

GOST
31 August 2015, 18:58
I would think that one could be saved for you Kyle. They should be back from anodizing in about a week.

Dstrbdmedic167
31 August 2015, 19:00
Have I mentioned how ready I am to get mine. Not sure what I'm gonna build with it but I'm ready!

voodoo_man
31 August 2015, 19:30
Have I mentioned how ready I am to get mine. Not sure what I'm gonna build with it but I'm ready!

I know right?

I have a whole gun built minus the lower and the tax stamp.

Thompson
1 September 2015, 04:25
Have I mentioned how ready I am to get mine. Not sure what I'm gonna build with it but I'm ready!

https://www.youtube.com/watch?v=cmZSFBy9CZ8

GOST
1 September 2015, 04:29
https://www.youtube.com/watch?v=cmZSFBy9CZ8

It's a eunuch.

toolboxluis00200
1 September 2015, 08:02
https://www.youtube.com/watch?v=cmZSFBy9CZ8

I have no clue how he got that to work

Jerry R
1 September 2015, 10:07
Really having a change of heart on this lower. Think I will just SBR it and put an existing shorty upper on it. I will SBR the 223 Wylde Pistol lower and the Sig 716 at the same time. Spend the money planned to complete the WEVO build on a shorty 308 upper for the Sig.

Thompson
1 September 2015, 15:53
I have no clue how he got that to work
With a lot of liberal tears and unicorns.

I was surprised myself. .... talk about SBr though.

GOST
2 September 2015, 20:18
With a lot of liberal tears and unicorns.

I was surprised myself. .... talk about SBr though.

Someone should produce a new gun lube called Unicorn Tears. A crying unicorn on the bottle would be epic.

Dstrbdmedic167
2 September 2015, 20:28
So just bite the bullet and this lower will be a 8.2" 277 WLV pistol/SBR.. already have a 16" and a 12.5" so the 8.2" made sense to me...

SFP Tactical
2 September 2015, 20:34
So just bite the bullet and this lower will be a 8.2" 277 WLV pistol/SBR.. already have a 16" and a 12.5" so the 8.2" made sense to me...

I'm just gonna go all out with a suppressed 10.5" .458 socom. Barrel is being made now. Now for some hello kitty cerakote 😜


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Dstrbdmedic167
2 September 2015, 20:35
I'm just gonna go all out with a suppressed 10.5" .458 socom. Barrel is being made now. Now for some hello kitty cerakote 😜


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

I'll drive to Ohio and slap you myself... Don't think I won't!

SFP Tactical
2 September 2015, 20:39
I'll drive to Ohio and slap you myself... Don't think I won't!

😂😂😂 I think it would be hilarious and may just buy the gas for ya just so you can shoot the beastly kitty.


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Dstrbdmedic167
2 September 2015, 20:51
😂😂😂 I think it would be hilarious and may just buy the gas for ya just so you can shoot the beastly kitty.


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Just say when... I'll bring the camera...

SFP Tactical
2 September 2015, 22:18
Just say when... I'll bring the camera...

Crap better bring some ammo at the cost .458 is without reloading 😜


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Dstrbdmedic167
2 September 2015, 22:36
Crap better bring some ammo at the cost .458 is without reloading 😜


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

I'll bring some goodies then...

Farva
3 September 2015, 00:03
I'm just gonna go all out with a suppressed 10.5" .458 socom. Barrel is being made now. Now for some hello kitty cerakote ��


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

finally someone else is on my page with the hello kitty paint job lol

SFP Tactical
3 September 2015, 16:35
finally someone else is on my page with the hello kitty paint job lol

Dstrbdmedic167 threatened my life if I do it.... I have decided to totally bling it out instead! Maybe gold plate?


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

din
3 September 2015, 17:47
Dstrbdmedic167 threatened my life if I do it.... I have decided to totally bling it out instead! Maybe gold plate?


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Bedazzle it in Multicam.

SFP Tactical
3 September 2015, 19:53
White and pink Kryptex 😂 I can see the death threats coming.


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

toolboxluis00200
3 September 2015, 20:01
White and pink Kryptex 😂 I can see the death threats coming.


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

http://www.chicagonow.com/god-running-partner/files/2015/04/Lynch-mob.jpg

SFP Tactical
3 September 2015, 20:06
http://www.chicagonow.com/god-running-partner/files/2015/04/Lynch-mob.jpg

Don't worry I have my army!http://images.tapatalk-cdn.com/15/09/03/44d8b13b258f926fe9f8e072c177fd58.jpg


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

toolboxluis00200
3 September 2015, 20:12
Lol

voodoo_man
4 September 2015, 03:59
http://i.imgur.com/VqzAhSn.jpg

Pyzik
4 September 2015, 04:05
Bedazzle it in Multicam.

MultiGLAM!

SFP Tactical
4 September 2015, 04:26
http://images.tapatalk-cdn.com/15/09/04/c1018a789d1abcd726ebe50f3e67dad6.jpg


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Farva
4 September 2015, 06:07
MultiGLAM!

Hahahahahaha that's perfect!

toolboxluis00200
4 September 2015, 06:25
http://images.tapatalk-cdn.com/15/09/04/c1018a789d1abcd726ebe50f3e67dad6.jpg


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

Maybe

velocity2006
4 September 2015, 08:56
Any ETA on the purchase date?

SFP Tactical
5 September 2015, 07:08
Maybe

Lol, see there is always possibilities.


Visit our IG page @sfptac or the website WWW.SFPTAC.COM

velocity2006
8 September 2015, 08:33
Any ETA on the purchase date?

No word?

UWone77
8 September 2015, 08:41
No word?

Just waiting for them to ship it to RA from the anodizers.

velocity2006
8 September 2015, 15:47
Sounds good, my pockets about burnt out holding onto the money for the lower.

UWone77
9 September 2015, 14:16
They are back from Anodizing.... should be ready to go early next week.

Dstrbdmedic167
9 September 2015, 14:20
They are back from Anodizing.... should be ready to go early next week.

Giggity Giggity!

toolboxluis00200
9 September 2015, 14:30
Cool can not wait to see some cool pics

Dstrbdmedic167
9 September 2015, 14:31
Now to figure out the handguard. Thinking the new 7" MI would be good as I'm building a pistol. May SBR but not a priority.

Farva
9 September 2015, 14:34
I can't wait!

Mecha_Arms
9 September 2015, 23:07
They are back from Anodizing.... should be ready to go early next week.

Any chance they'll be ready for pick up Saturday during the Summer Blast?

Deadwing
10 September 2015, 00:36
Updated. Halfway there!

1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10. SFP Tactical
11. Deadwing
12.
13.
14.
15.
16.
17.
18.
19.
20.


Updated

Add my name to the list! Count me in!

mustangfreek
10 September 2015, 04:00
They are back from Anodizing.... should be ready to go early next week.

Sweet!!..i bet 20 battlekitty lowers is a awesome sight...

Pyzik
10 September 2015, 04:44
Can't wait to see them. MAYBE I'll be able to grab one before they're all gone.

Battle Cock
10 September 2015, 09:19
Add my name to the list! Count me in!

Same here. I posted in for a lower early on but I don't see my name on the list.
I'm at a point where I have the coin set aside for it so this is a solid "in" post.

voodoo_man
10 September 2015, 11:41
1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10. SFP Tactical
11. Deadwing
12. Battlecock
13.
14.
15.
16.
17.
18.
19.
20.

Ride4frnt
10 September 2015, 15:12
So who wants to buy one for me for a housewarming? I got a call from my lender today bitching at me that I put flooring and paint on my credit card a week before closing on the house.

UWone77
10 September 2015, 15:16
So who wants to buy one for me for a housewarming? I got a call from my lender today bitching at me that I put flooring and paint on my credit card a week before closing on the house.

They hate that man... that whole debit to income thing.

toolboxluis00200
10 September 2015, 15:20
CC ARE EVIL I SAY EVIL

voodoo_man
10 September 2015, 15:21
So who wants to buy one for me for a housewarming? I got a call from my lender today bitching at me that I put flooring and paint on my credit card a week before closing on the house.

If they still give you a loan F-Em!

Ride4frnt
10 September 2015, 15:26
They hate that man... that whole debit to income thing.

Yeah I get that now. But I put $600 on my card with zero interest with the intent to pay it off as soon as the statement comes. Oh well. Loan has already been approved.

GOST
10 September 2015, 16:49
Yeah I get that now. But I put $600 on my card with zero interest with the intent to pay it off as soon as the statement comes. Oh well. Loan has already been approved.
You should put the lower on the card also, I'm kidding.

Deadwing
11 September 2015, 00:43
So who wants to buy one for me for a housewarming? I got a call from my lender today bitching at me that I put flooring and paint on my credit card a week before closing on the house.


They hate that man... that whole debit to income thing.

When i bought my first house, my lender told me "don't make any big purchases until we close", and i needed a refrigerator for the place. I figured of a lousy grand was jeopardize the whole deal, it was probably on pretty shaky ground to begin with. Besides, the beer ain't gonna keep itself cold.

voodoo_man
12 September 2015, 04:11
Anyone know the model number that is going to be stamped on this lower for E-File?

GOST
12 September 2015, 08:20
Anyone know the model number that is going to be stamped on this lower for E-File?

Voodoo the markings on the otherwise are the same as the Rainier Arms UltraMatch Mod 3. The model number on those is: RM15

voodoo_man
12 September 2015, 11:07
Voodoo the markings on the otherwise are the same as the Rainier Arms UltraMatch Mod 3. The model number on those is: RM15

Rm15, got it thanks only piece of the form1 puzzle I didnt have.

This is gana be epic...

voodoo_man
12 September 2015, 11:30
...and submitted...

GOST
12 September 2015, 13:07
...and submitted...

Very nice, look forward to seeing the finished product.

Jerry R
14 September 2015, 10:50
They are back from Anodizing.... should be ready to go early next week.

UW, will Rainier let us know, or will you just update this thread when they are available to order? Will we order from their normal website "Store" ? Now that it is close, I am curious about the actual order process.

UWone77
14 September 2015, 12:24
UW, will Rainier let us know, or will you just update this thread when they are available to order? Will we order from their normal website "Store" ? Now that it is close, I am curious about the actual order process.

I'm headed up there on Wednesday, so I'll keep you guys posted once I figure it out.

voodoo_man
14 September 2015, 13:44
I'm headed up there on Wednesday, so I'll keep you guys posted once I figure it out.

They let anyone in that place dont they...

toolboxluis00200
14 September 2015, 14:08
They let anyone in that place dont they...

Lol

UWone77
16 September 2015, 18:25
Checked out the WEVO lowers as they arrived today. There are approximately 20 available. Here's how the sale will go:

They'll be posted on Rainier Arms' website tomorrow.

They'll be listed on the website at some insane price, ie $1000. This is done so, someone doesn't randomly stumble upon them and order 10.

I'll post a code for the the people on the group buy, which will reduce the price to $212 if I recall correctly.

Dstrbdmedic167
16 September 2015, 18:32
A mere $1k seems legit...

GOST
16 September 2015, 18:49
$212 for some kitty? Should have thought about this before I got married.[BD]

toolboxluis00200
16 September 2015, 18:53
A mere $1k seems legit...

Must be low quality pssst needs to be $2000

GOST
16 September 2015, 19:02
Now that the wait is about over for the WEVO lowers, now it starts for the WEVO kitty t-shirts.

Dstrbdmedic167
16 September 2015, 19:11
Now that the wait is about over for the WEVO lowers, now it starts for the WEVO kitty t-shirts.

Yes sir!

voodoo_man
16 September 2015, 19:27
Checked out the WEVO lowers as they arrived today. There are approximately 20 available. Here's how the sale will go:

They'll be posted on Rainier Arms' website tomorrow.

They'll be listed on the website at some insane price, ie $1000. This is done so, someone doesn't randomly stumble upon them and order 10.

I'll post a code for the the people on the group buy, which will reduce the price to $212 if I recall correctly.

Soooo....how do I know ill get my specific lower...?

Should I add it to the comments?

GOST
16 September 2015, 19:36
Soooo....how do I know ill get my specific lower...?

Should I add it to the comments?

You have to hold his kimchi hostage.

toolboxluis00200
16 September 2015, 19:53
You have to hold his kimchi hostage.

Live the kimichi along. It did nothing too you

toolboxluis00200
16 September 2015, 19:54
Now that the wait is about over for the WEVO lowers, now it starts for the WEVO kitty t-shirts.

I take one in 6xL

GOST
16 September 2015, 19:57
I take one in 6xL

Wouldn't that be a moo moo?

toolboxluis00200
16 September 2015, 19:59
Wouldn't that be a moo moo?

Lol no the srink so I all was get it at a big size.

UWone77
16 September 2015, 20:02
Soooo....how do I know ill get my specific lower...?

Should I add it to the comments?

I gave them a heads up so put it in the comments.

Farva
16 September 2015, 22:11
so excited!

Mecha_Arms
16 September 2015, 22:48
I gave them a heads up so put it in the comments.

Remind me what was specific about the lowers, please. I thought the serial numbers were the same as the Mod 3 lowers. Is that incorrect?

velocity2006
16 September 2015, 22:59
They are the same but I believe voodoo already filed SBR paperwork for his specific lower.

Deadwing
17 September 2015, 03:54
Sweet! I'm stoked!

Ride4frnt
17 September 2015, 04:28
Remind me what was specific about the lowers, please. I thought the serial numbers were the same as the Mod 3 lowers. Is that incorrect?

I believe voodoo already got his serial number so he could file his form1

voodoo_man
17 September 2015, 06:56
I gave them a heads up so put it in the comments.

Chkrog

Mecha_Arms
17 September 2015, 08:01
Cool.

I had thought about having RA make mine into a Form 4 SBR (currently the only way it's allowed here), but they just yesterday announced on TOS that they're going to stop doing those.

I suppose I didn't the the additional expense of a tax stamp right now anyway.

Joelski
17 September 2015, 15:42
Is there still room on the list? If so, I'll get payment sent out. I didn't like it at first, but I gotta say, its grown on me!

toolboxluis00200
17 September 2015, 16:05
Is there still room on the list? If so, I'll get payment sent out. I didn't like it at first, but I gotta say, its grown on me!

http://vignette2.wikia.nocookie.net/vampirediaries/images/e/e6/Surprised-Cat.gif/revision/latest?cb=20131123143442

din
17 September 2015, 17:17
Is there still room on the list? If so, I'll get payment sent out. I didn't like it at first, but I gotta say, its grown on me!

Done and done.

1. din
2. Dstrbdmedic167
3. SINNER
4. voodoo_man
5. velocity2006
6. Jerry R
7. nijikon84
8. Mecha_Arms
9. Farva
10. SFP Tactical
11. Deadwing
12. Battlecock
13. Joelski
14.
15.
16.
17.
18.
19.
20.

U-dub, any idea when these are going up on Rainier's site? I've been doing the Snoopy dance all day waiting. It's like the peepee dance, but different.

Joelski
18 September 2015, 04:04
I remember both of those dances, you're right! They've been there a while now. I love having my lower fondled, but I prefer to be present when it happens.

velocity2006
18 September 2015, 08:55
Any word?

Jerry R
18 September 2015, 09:21
I remember both of those dances

At my age, no matter which dance I do, my shoes get wet [BD]

Joelski
18 September 2015, 11:12
ROFL!!'

UWone77
18 September 2015, 11:14
It's up, but just waiting for the coupon code for those that committed...

Stand By...

http://www.rainierarms.com/rainier-arms-ultramatch-billet-ambi-lower-receiver-mod-3-wevo

Farva
18 September 2015, 12:18
http://images.tapatalk-cdn.com/15/09/18/95a61e06019d8f7f46d8808e89261b2b.jpg

UWone77
18 September 2015, 12:33
Just PM'ed you guys on the list with the code

UWone77
18 September 2015, 12:38
Apex membership and/or some log ins are having problems with the code. They're working on it. Otherwise, you can always call your order in and mention the code.

Farva
18 September 2015, 12:46
Apex membership and/or some log ins are having problems with the code. They're working on it. Otherwise, you can always call your order in and mention the code.
I was just about to mention this. 👍

UWone77
18 September 2015, 13:04
Should work fine now.

Jerry R
18 September 2015, 13:11
Order placed - thanks for getting this done for us UW - very much appreciated !!

Joelski
18 September 2015, 13:18
Done and DONE.

Thanks UWOne! Good luck on all these builds, gents. I look forward to seeing some fine shootin' irons!

Dstrbdmedic167
18 September 2015, 13:20
Got mine in! Stoked! Wevo FTW!

Deadwing
18 September 2015, 13:35
Got my order placed! I'm super stoked! Thanks for making this happen, UW! And thanks to GOST for the design!

Farva
18 September 2015, 13:55
Got mine on the way too! I'm excited as this is a few firsts for me. It'll be my first billet lower and I've always bought my lowers locally so it's my first time shipping to an FFL. I hope I've done everything right!

Dstrbdmedic167
18 September 2015, 14:24
Got mine on the way too! I'm excited as this is a few firsts for me. It'll be my first billet lower and I've always bought my lowers locally so it's my first time shipping to an FFL. I hope I've done everything right!

Make sure you're FFL sends an email with their credentials and they mention the order # in the email. Helps things go quicker. Email is ffl@rainierarms.com

Farva
18 September 2015, 14:25
Make sure you're FFL sends an email with their credentials and they mention the order # in the email. Helps things go quicker. Email is ffl@rainierarms.com

I read that from their website. My question is since my FFL was on the list (when you check out it asks for an FFL search) do I still need them to send their information?

Dstrbdmedic167
18 September 2015, 14:27
I read that from their website. My question is since my FFL was on the list (when you check out it asks for an FFL search) do I still need them to send their information?

You should be good then but I do anyway... That way they didn't have to look it up..

din
18 September 2015, 14:27
Order in! Now I have to figure out whether I want to SBR it or not...

voodoo_man
18 September 2015, 14:40
Ordered!

Fuck yeah

toolboxluis00200
18 September 2015, 15:16
Congrat guys hope to see some pics soon

DutyUse
18 September 2015, 16:04
Congrats all

GOST
18 September 2015, 19:18
Your guys support of this project has been great. CMT and Rainer did a superb job on the mod 3, you guys are in for a treat. Thanks again for supporting this project, you guys rock.

UWone77
18 September 2015, 20:08
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3554_zpsatvznjit.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3554_zpsatvznjit.jpg.html)

Dstrbdmedic167
18 September 2015, 20:10
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3554_zpsatvznjit.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3554_zpsatvznjit.jpg.html)

well that didn't take long! What upper?

toolboxluis00200
18 September 2015, 20:13
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3554_zpsatvznjit.jpg

That was fast lol. Moneybag Jr. Lol

DutyUse
18 September 2015, 20:50
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3554_zpsatvznjit.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3554_zpsatvznjit.jpg.html)

Looks killer. I'm liking the SL stock on it

Farva
18 September 2015, 22:19
I'm gonna have to wait a few days to fondle mine since it's Friday and all 😤

din
18 September 2015, 22:39
I'm gonna have to wait a few days to fondle mine since it's Friday and all 😤

You gonna make it?

Farva
18 September 2015, 23:07
You gonna make it?

Haha we shall see. I got her all ordered earlier today and I'm already having withdraws.

voodoo_man
19 September 2015, 05:19
Haha we shall see. I got her all ordered earlier today and I'm already having withdraws.

https://i.imgflip.com/raeb8.jpg

Farva
19 September 2015, 05:20
https://i.imgflip.com/raeb8.jpg

http://images.tapatalk-cdn.com/15/09/19/b80fe328dcaacf26de16e2d2e94be3d5.jpg

mustangfreek
19 September 2015, 05:22
Lol ^^

UWone77
19 September 2015, 05:24
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3559_zpsdzrlue8u.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3559_zpsdzrlue8u.jpg.html)

mustangfreek
19 September 2015, 05:43
Damnit...lol

Very nice......Just a little jealous...dont mind me...[BD]

Jerry R
19 September 2015, 06:04
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3554_zpsatvznjit.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3554_zpsatvznjit.jpg.html)

Wow, that was fast !

SINNER
19 September 2015, 12:34
Ordered mine today. And another MML MATEN for crazy cheap with the Apex. Lol might as well just send Rainier my bank account info.

UWone77
19 September 2015, 13:03
Wow, that was fast !

To be fair Jerry, I've had mine for 3 weeks, just finally took a picture.


Ordered mine today. And another MML MATEN for crazy cheap with the Apex. Lol might as well just send Rainier my bank account info.

It's a double edged sword! The cheaper it is, the more you end up buying!

Joelski
19 September 2015, 14:47
What is this Apex of which you speak? A new way to cleanse myself of the root of evil? Educate me, please!

Dstrbdmedic167
19 September 2015, 15:37
What is this Apex of which you speak? A new way to cleanse myself of the root of evil? Educate me, please!

Its like amazon prime for guns. You pay a yearly fee and you get a discount on just about everything Rainier Arms sells. You get free standard shipping as well plus other perks listed on the site. Its $79.95 a year for the first year and then $99 a year after that.

https://www.rainierarms.com/apex

Joelski
19 September 2015, 15:43
Thanks bro! I'm definitely in.

PS: Fellow medic here.

Dstrbdmedic167
19 September 2015, 15:51
Thanks bro! I'm definitely in.

PS: Fellow medic here.

You'll enjoy it! I got in on the initial intro price ($29.95) and its already paid for itself in the savings plus some!

Sweet! Always need more medics!

Joelski
19 September 2015, 15:52
In. Damn few of us, brother. Cheers

UWone77
19 September 2015, 16:03
You'll enjoy it! I got in on the initial intro price ($29.95) and its already paid for itself in the savings plus some!

Sweet! Always need more medics!

But that price is long over with.

Dstrbdmedic167
19 September 2015, 16:04
But that price is long over with.

Yes sorry should have mentioned it was a couple days only..

Jerry R
19 September 2015, 16:11
What is this Apex of which you speak? A new way to cleanse myself of the root of evil? Educate me, please!

Apex is a discount program offered by Rainier. Really good pricing and free shipping. Annual renewal. Pays for itself if you are buying or planning to buy for a build.

UWone77
19 September 2015, 18:15
http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3557_zpsjdsofsij.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3557_zpsjdsofsij.jpg.html)

din
19 September 2015, 18:40
Bow chicka bow wow.

Joelski
19 September 2015, 18:50
Any chance of getting a patch to go with? You know, in case we want to do color fills. ;)

That's a clean ano job! Kinda wish I'd have registered this one for my SBR, but it'll work nicely on my rifle.