OFFICIAL: Want to Trade Thread

[mustangfreek]

Okay.....So i have thought about this or something like it and have seen similiar on other forums.Just seen those other comments in the PIF section made me think.Maybe someone has something they want to trade or extra whatever in their parts bin to offer up for something.

So Post up an item you either have to trade/ or an item you'd like to trade for, and vice versa.I think it will be fun to swap out goodies to try other goodies..lol


..I would like to try a different levers

Go........[:D]..........Mods if this is a no-go..sorry and erase or whatever...[BD]

[UWone77]

AHHH.....FAILED AS USUAL...JUST CLOSE THIS

LOL

No, we're reviving it! I'll look through the piles of crap from the move and will gladly trade.

[greenlineaz]

I have:
an unused tan Magpul MS3 sling
Echo 93 V1 Sling Plate ( http://www.echo93.com/#!adaptors/c1bhd) for an AK

Looking for:
QD end plate for an M4

[mustangfreek]

Lol....this thread..

Anyways anyone with a normal size .154 trigger pin kit ? Kns or such... If so I can find something for trade or $$

[Battle Cock]

Lol....this thread..

Anyways anyone with a normal size .154 trigger pin kit ? Kns or such... If so I can find something for trade or $$

I've got an extra trigger pin with screws from a CMC kit. Think that'll fill your need?

[mustangfreek]

I've got an extra trigger pin with screws from a CMC kit. Think that'll fill your need?

So you got 1 pin?...I need 2....[BD]......and I'm "assuming" the Cmc pins would work with the geiselle trigger..??

Thanks though BC

[Battle Cock]

So you got 1 pin?...I need 2....[BD]......and I'm "assuming" the Cmc pins would work with the geiselle trigger..

Yeah. I sheared a screw installing the trigger on a forged lower and CMC sent me another pin kit, leaving me with a spare. I've also got a couple pins from a milspec LPK as well.

[Sak007]

You guys really forcing me to do a detailed accounting of the storage totes of random gun parts I have & not to mention the insane amount of reloading stuff for calibers I don't have nor care for [bash]

[mustangfreek]

Looking for a couple small frame 17/19 etc glock parts

Minus connector , zev v4 connector

Gen 3 trigger bar

[UWone77]

Looking for a couple small frame 17/19 etc glock parts

Dot connector , zev v4 connector

Gen 3 trigger bar

I think I have some extra Gen 3 trigger assemblies in the parts bin. I'll get back to you.

[mustangfreek]

I think I have some extra Gen 3 trigger assemblies in the parts bin. I'll get back to you.

Thanks !!

Anyone got a minus connector laying around?

[Joelski]

Lol....this thread..

Anyways anyone with a normal size .154 trigger pin kit ? Kns or such... If so I can find something for trade or $$

Did you find one yet? I have a set I took off after upgrading to Geissele triggers. No packaging, but you can always d/l the instructions frrom KNS. It's this version:

http://i997.photobucket.com/albums/af93/Joelski144/ARs%20and%20Pistols/MK%2018/20160404_222638-1_1.jpg~original

[rxer311]

I have a Magpul STR Black Mil Spec stock. I want a Magpul ACS or ACSL stock black and mil spec.

Thanks!

[mustangfreek]

This thread is working so well so....

Long shot but...I have a like new Arisaka keymod VFG & fingerstop is like to trade For a Arisaka mlok fingerstop, offset mlok scout Mount....Or sell so I can grab them

[UWone77]

This thread is working so well so....

Long shot but...I have a like new Arisaka keymod VFG & fingerstop is like to trade For a Arisaka mlok fingerstop, offset mlok scout Mount....Or sell so I can grab them

I think I have a keymod Finger stop.

[Airborne_EWO]

Got a lightly used cerakoted 556 lantac dragon I’m throwing up for trade....looking for something different as in a comp/FH/hybrid..

Give me a day or two and if I can get the pinned RA XTC off my barrel in good shape, I will send it to you.

[Airborne_EWO]

Got a lightly used cerakoted 556 lantac dragon I’m throwing up for trade....looking for something different as in a comp/FH/hybrid..

Ok, got it off. Let me know if this is what your looking for and u can live with the pin removal spot. Shoot me a pm.

ETA pics

https://uploads.tapatalk-cdn.com/20171120/8eb2df1227a92fc3a2f84b77c07f4242.jpghttps://uploads.tapatalk-cdn.com/20171120/b7e0692510ca67d92a814062fc77ae9e.jpg

[Aragorn]

PM also sent.

[UWone77]

Man, those RA XTC's, are blast from the past.

[Airborne_EWO]

Man, those RA XTC's, are blast from the past.

Lol, yeh, I’ve had it on a 14.5 for a few years now. Just pulled it off to throw an ASR FH on for my new can.

[mustangfreek]

Man, those RA XTC's, are blast from the past.

They are Huh..ran a few of them on old rifles.

Thanks for the offer airborne...after something different as I’ve ran the xtc before. Nothing wrong with it per say just after something non brake related

[Airborne_EWO]

They are Huh..ran a few of them on old rifles.

Thanks for the offer airborne...after something different as I’ve ran the xtc before. Nothing wrong with it per say just after something non brake related

No worries brother. It is a bit old, but still works great. I have no need for it now, so I shall save for it for someone else who needs help with a part for their build or throw it on the PIF.

[Former11B]

Anybody have any Magpods they want to trade parts or cash for?

[VIPER 237]

I have a pile of Magpul xtm covers in black fde and maybe foliage green that I’d love to trade for black or Fde rubber ladder covers if anyone is interested

[Joelski]

I have a FDE tango down Vertical grip with adm qd in like new condition I'd like to trade for the mini version in FDE.

Looking for used KAC sights in taupe.

[mustangfreek]

I know lots of you have swapped Glock triggers out for something else.

Anyone got a gen 3 trigger bar and shoe from a 17/19 etc they aren’t gonna use? Thought I’d ask before I looked for a new one?

I got a ext. lone wolf mag release and slide lock I could send ya. Or something else laying around. New zippo lighter

[FortTom]

I know lots of you have swapped Glock triggers out for something else.

Anyone got a gen 3 trigger bar and shoe from a 17/19 etc they aren’t gonna use? Thought I’d ask before I looked for a new one?

I got a ext. lone wolf mag release and slide lock I could send ya. Or something else laying around. New zippo lighter

Damn, bud, I just threw out a whole trigger system for a 19/23. Didn't figure anyone would want it, and would have been looking for a "custom" trigger set up.

Sorry. Maybe I'll start keeping shit like that. Duh.....

FT

[mustangfreek]

Crap...lol

[Former11B]

Wanted:

Daniel defense RIS II FSP (Carbine length FSP cutout) rail

Black or FDE.

Anyone have one laying around I can buy or trade for?


Or one of the drop in Carbine length KAC quad rail systems? Don’t need all the plastic covers and whatnot

[Uffdaphil]

I low mounted 2 of my MROs on an AK and CZ Evo so need one or two to replace on an ARs. Original “fisheye” or new model MRO are fine. Don’t need a mount.

For trades +/- cash:

AAC 16” barrel .300 Blackout. Less than 100 rounds through it.
PSA 16” 9mm upper/rail/barrel- no bcg “
7” DD quad Lite rail
13” Geissele MK4 rail- bronze/desert whatever they call it.
Scalarworks co-witness MRO mount.
Burris 1.25-8 XTR II scope - model 201010
Can add five tan NIW Lancer mags in lieu of cash if prefferred.

Here only for now. Will crosspost if no bites.

[mustangfreek]

Anyone got a 5/8” threads- .308 A2 flash hider laying around there not using?

[UWone77]

Like a Dragon? Lol... I’m sure I do

[mustangfreek]

No phucking dragons..lol

[Calico Jack]

I have one. No crush washer though.

[mustangfreek]

I think I found one. I’ll let ya know if not. Thanks

[mustangfreek]

Maybe a long shot.. but asking anyways

Looking for some ammo to try out in my new 10.5” 556 setup..and to have a couple mags of sitting by.

Looking for some 64/75 gr gold dots or such HP ammo

Local would be easiest but I’m all ears... have some new 9mm fmj,223/556 fmj to trade

[alamo5000]

Maybe a long shot.. but asking anyways

Looking for some ammo to try out in my new 10.5” 556 setup..and to have a couple mags of sitting by.

Looking for some 64/75 gr gold dots or such HP ammo

Local would be easiest but I’m all ears... have some new 9mm fmj,223/556 fmj to trade

I have only shipped ammo once and believe me, it's a pain in the ass. It's expensive too. I can deal with the ammo, but shipping it is prohibitively expensive. And plus you can't just drop it off at the local UPS/Fedex store. You have to drive to their transportation hub and drop it off between certain hours.

Again, I've done it, but only once.

[FortTom]

Anyone got a 5/8” threads- .308 A2 flash hider laying around there not using?
Hey, I just might have one, I'll look tomorrow and if I do, you can have it. It was a take off, so I'm sure that if I do still have it, it won't have a crush washer, but they're cheap.

FT[:D]

[mustangfreek]

No worries FT

I made the change to suppressor mounts across the board

Thanks though !

[Uffdaphil]

A real long shot, but I know we have other members near me. I really need some IMR4064 powder to load 150gr .308. I can trade CFEBLK or CFE223. Or factory ammo - 6.5 Creedmore, .22lr, .45acp plinkers, a little .45 Colt if I can find it, Wolf Gold .223, all the 5.45x39 7N6 you can eat. Will season with cash as needed.

Local only please. I’ll drive up to 50 miles to meet. Or could meet in/on the way to Fargo. Great excuse to visit the grandson. Must be some Nodak gents here too.

[mustangfreek]

Looking for couple things..

-HRS-coyote brown -rmr-gen2-3.25 if anyone around here has a slightly used one for sale.

-Also looking for a minty threaded barrel for g19/Gen 1-4
Lantac is on my radar, but will entertain other ideas

Figured I asked here while I wait for BF to pop one up hopefully. Have some stuff or 100 dollar bills to trade :)

[UWone77]

Looking for couple things..

-HRS-coyote brown -rmr-gen2-3.25 if anyone around here has a slightly used one for sale.

-Also looking for a minty threaded barrel for g19/Gen 1-4
Lantac is on my radar, but will entertain other ideas

Figured I asked here while I wait for BF to pop one up hopefully. Have some stuff or 100 dollar bills to trade :)

I would keep checking Kenzie's for Coyote RMR's, bought my last 2 from them when they last had a sale. Was cheaper than any other website at the time, even with a LE/MIL Discount.

[mustangfreek]

I got a 1/3 Scalarworks t2 mount in minty shape and looking for the same in 1.93 if anyone is interested.

[UWone77]

I got a 1/3 Scalarworks t2 mount in minty shape and looking for the same in 1.93 if anyone is interested.

Specifically a Scalarworks 1.93 or a comparable 1.93?

[TheRifleman]

From L to R: S&W Shield 9x19 1.0 slide, CMC 6 ARC BCG unfired, PSA fully assembled Micro Dagger slide, Inforce APLc FDE & black, HK VP9LE slide, G17 Gen 5 slide, Magpul MBUS 2 set, Centurion 10.5 Mlok FF unused, Duramag NIB 6.5G 20 round mag, Arisaka offset mount with RMR & RMRcc plates, Lantac Dragon 5/8 308, Lantac BMD with BMD mount, B5 SOPMOD with rack number on stock, FCD PMA, and Trijicon RM35 for RMR to piggyback on most ACOG models. What I am interested in trading for are 1911 8 round mags from WC, G17 Gen 7 17 round mags, G43X/G48 factory OEM 10's, S&W Shield 9 7 round magazines, P320 45 ACP 9 or 10 round mags, FCD ASF90, Badger Condition One selector, FCD SBCG NP3, Centurion Sand Cutter bolt carrier, Sionics NP3 BCG, BCM FDE BCG, DD BCG, Larue MBT curved 2 stage, Geissele SSA, barrels in 14.5 and 13.9, Scalarworks 1.93 Aimpoint micro mount, DD Grip n Rip CH's in small or large frame sizes, Surefire 340DFT PRO & 640DFT PRO, FCD LSFA, Scalarworks PEAK folding BUIS set 1.93 height, Magpul MBUS 3 set, Noveske marked RCA BCG, Unity Axon SL, VP9 17 round conversion kits, Surefire X300U or T B models, Sig Romeo X circle dot, Eotech EXPS, Badger Dead Level, Agilite K19 PC 3.0 or K-Zero medium in multicam. Make offer if wanting to buy instead, worst I can do is give a polite no thank you. I can provide any additional photos on request, just trying to save credits by doing all in one shot for just one ad and will update as necessary for the things bought and traded for.

https://i.imgur.com/EZ1rOxB.jpg