Rainier Arms Ultramatch PDW SBR

[GOST]

http://pull01.rainier.netdna-cdn.com/media/product/adb/rainier-arms-ultramatch-pdw-sbr-ra-pdw-sbr-by-rainier-arms-llc-a76.jpg

This personal defense rifle was built from the ground up to be the ultimate CQB weapon. We spent countless hours developing this system and spared no expense in designing the make up of this fine weapon. From the Mod 3 billet receiver set, to the Ultramatch 7.5" barrel, back to the CMT PDW stock, no detail was left untouched.

http://pull01.rainier.netdna-cdn.com/media/product/edd/rainier-arms-ultramatch-pdw-sbr-ra-pdw-sbr-by-rainier-arms-llc-de2.jpg

The UltraMatch™ PDW SBR weighs in at 5 lbs and 15.4 oz. It features Rainier Arms Ultramatch billet upper and lower receivers made from 7075 aluminum. We wanted to build our rifle by using Rainier Arms Ultramatch™ 7.5" Stainless Steel Barrel. These barrels are the finest blank (Shilen Blank) contoured to our specifications for reliability and accuracy shooting. As always, we designed the rifle to be ambidextrous to accommodate our shooters. Every rifle comes with Rainier Arms Avalanche Interchangeable Charging Handle, built in ambidextrous bolt release, and ambidextrous 45 degrees safety selector. All materials used are of industry-leading standards, each weapon carefully and meticulously assembled with a limited lifetime warranty.

Features:

Rainier Arms Ultramatch 7.5" Stainless Steel Barrel
Twist 1:8
Rainier Arms Match Precision BCG phosphate
Hera Arms Linear Compensator
Rainier Arms Switch 9"
Rainier Arms Avalanche Charging Handle - Knurled Handles
Forward Conrtols Design LDFA Titanium
Rainier Arms Ultramatch 7075 Billet Upper Receiver Type III Hard Coat Anodized
Rainier Arms Ultramatch 7075 Billet Lower Receiver Type III Hard Coat Anodized
Ambidextrous Extended Bolt Release and Mag Release
Flared Magwell
Integrated Trigger Guard
Battle Arms Development Titanium Pivot/Takedown Enhanced pin set
CMC Single Stage 3.5 lbs Flat Trigger
Rainier Arms Selector: 45 degree Standard/Short
Magpul MOE grip
CMT PDW Stock with 5 locking positions
Grey Ghost Gear Apparition Bag - Two tone rifle backpack included

Custom Cerakote Colors Available:

http://pull01.rainier.netdna-cdn.com/media/product/24e/rainier-arms-ultramatch-pdw-sbr-custom-ra-pdw-sbr-custom-by-rainier-arms-llc-color-custom-f73.jpg
http://pull01.rainier.netdna-cdn.com/media/product/c97/rainier-arms-ultramatch-pdw-sbr-custom-ra-pdw-sbr-custom-by-rainier-arms-llc-color-custom-1b2.jpg
http://pull01.rainier.netdna-cdn.com/media/product/384/rainier-arms-ultramatch-pdw-sbr-custom-ra-pdw-sbr-custom-by-rainier-arms-llc-color-custom-cdc.jpg

MSRP $2099.95

http://www.rainierarms.com/rainier-arms-ultramatch-pdw-sbr

[tact]

Bet this is totally unreliable and merely a $2000 paperweight without a 19 position adjustable gas block, 4 buffers, and a 12.5" barrel.....just sayin'

[GOST]

Bet this is totally unreliable and merely a $2000 paperweight without a 19 position adjustable gas block, 4 buffers, and a 12.5" barrel.....just sayin'

What are you basing this on?

[toolboxluis00200]

Love to see some video of it in action

[UWone77]

What are you basing this on?

I think he's just making a reference to the other thread about SBR's and people who use adjustable gas blocks.

[alamo5000]

http://pull01.rainier.netdna-cdn.com/media/product/adb/rainier-arms-ultramatch-pdw-sbr-ra-pdw-sbr-by-rainier-arms-llc-a76.jpg

Holy crapola. That looks nice.

[alamo5000]

Here is a question though, since this is a pre built SBR how would the transfer take place on something like this?

Does it have to go through the same type of FFL as a suppressor, or can you sell it as an upper and a lower with the lower going through a regular FFL and then you stamp it yourself? Or is it already engraved with RA as the manufacturer of the SBR?

[DutyUse]

Any chance their gonna come out with different barrel lengths? I think it's pretty flipping cool

[UWone77]

Here is a question though, since this is a pre built SBR how would the transfer take place on something like this?

Does it have to go through the same type of FFL as a suppressor, or can you sell it as an upper and a lower with the lower going through a regular FFL and then you stamp it yourself? Or is it already engraved with RA as the manufacturer of the SBR?

This is a factory SBR, so you'll have to Form 3 it to your dealer, then they can Form 4 it.

[tact]

What are you basing this on?

It was just a little joke in reference to another thread about SBRs.

[Joelski]

THAT MFer is STATE-OF-THE-ART! [/Jack Black]