rxer311
6 October 2015, 15:41
So if you read my other thread you saw that I broke down the rifle because the pic rail was under spec and would not hold my Meprolight RDS without slight movement. I got my rifle back last week and was finally able to get to the range this afternoon.
Voodoo 14.5" midlength barrel with pinned Manimal FH. BCM mil spec FCG. Meprolight RDS 1.8 MOA dot. XM193 Federal mil spec ammo. Got it zeroed at 50 yards then shot 60 rounds. Found that I am still maybe 1/2" low so I adjusted 1 click up for a 1/4" adjustment. Shot another 10 round group which was pretty much dead center when the group is measured but at that time my barrel was heating up, I was getting fatigued, and you could tell my group was opening up.
Anyway, here is my 60 shot grouping.
http://i112.photobucket.com/albums/n164/rxer311/40417c3f-b9ea-4336-af7a-04ba2fc6d626_zps0vs3epir.jpg
Here the rifle with an Aimpoint ACO which was switched out for the Meprolight.
http://i112.photobucket.com/albums/n164/rxer311/IMG_0716_zpsf2l58jn8.jpg
Voodoo 14.5" midlength barrel with pinned Manimal FH. BCM mil spec FCG. Meprolight RDS 1.8 MOA dot. XM193 Federal mil spec ammo. Got it zeroed at 50 yards then shot 60 rounds. Found that I am still maybe 1/2" low so I adjusted 1 click up for a 1/4" adjustment. Shot another 10 round group which was pretty much dead center when the group is measured but at that time my barrel was heating up, I was getting fatigued, and you could tell my group was opening up.
Anyway, here is my 60 shot grouping.
http://i112.photobucket.com/albums/n164/rxer311/40417c3f-b9ea-4336-af7a-04ba2fc6d626_zps0vs3epir.jpg
Here the rifle with an Aimpoint ACO which was switched out for the Meprolight.
http://i112.photobucket.com/albums/n164/rxer311/IMG_0716_zpsf2l58jn8.jpg