PDA

View Full Version : Rainier ambi lower (wevo) + MVB ARC PDW = no good



voodoo_man
4 November 2015, 13:00
Waited forever to get these two together and the MVB ARC PDW stock does not clear the QD points on the back of the lower.

Can't cut them down (the lower) and can't cut down the ARC PDW stock.

So....they don't work together, guess the kitty is getting a law tactical folder.

velocity2006
4 November 2015, 13:08
Bummer, I went with an FDE Shockwave for mine. Gonna be a nice little 300BO pistol.

GOST
4 November 2015, 13:33
Is the MVB shorter than a LWRC ultra compact stock?

voodoo_man
4 November 2015, 14:04
Is the MVB shorter than a LWRC ultra compact stock?

Good question, dunno.

GOST
4 November 2015, 14:14
From what I can find the MVB is 4 7/8" and the LWRC Ultra Compact is about 6". I've used the LWRC and really liked it, I haven't used the MVB though.

toolboxluis00200
4 November 2015, 14:46
Waited forever to get these two together and the MVB ARC PDW stock does not clear the QD points on the back of the lower.

Can't cut them down (the lower) and can't cut down the ARC PDW stock.

So....they don't work together, guess the kitty is getting a law tactical folder.

Oh man that suck

SINNER
4 November 2015, 20:16
On the Rainier PDW that made the cover of Recoil they machined the QD sockets off to clear the stock rails. Easy fix if you dont mind having some machining done unless you can do it yourself.

voodoo_man
5 November 2015, 02:31
On the Rainier PDW that made the cover of Recoil they machined the QD sockets off to clear the stock rails. Easy fix if you dont mind having some machining done unless you can do it yourself.

I mean, i probably could....i dunno, im up in the air.

velocity2006
5 November 2015, 08:04
Would probably be pretty easy to find someone with a vertical mill to just take those surfaces down a bit. Would have to refinish at that point though.

Bronco75
5 November 2015, 09:57
Not sure if the MVB is any different than the NEA version...but I could not get rid of mine fast enough. They look cool, but that is about it. If you have T-Rex arms...you might be able to get a cheek weld...otherwise not a chance.

GOST
8 November 2015, 06:10
Here's a pic from Steve Coulston.

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12186563_10153428932824219_3838212378576244116_o.j pg?efg=eyJpIjoidCJ9

voodoo_man
8 November 2015, 06:37
Here's a pic from Steve Coulston.

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12186563_10153428932824219_3838212378576244116_o.j pg?efg=eyJpIjoidCJ9

which pdw is that?

GOST
8 November 2015, 07:38
I'm not sure, but I think it's a MMC Armory.

https://www.mmcarmory.com

toolboxluis00200
8 November 2015, 13:20
Here's a pic from Steve Coulston.

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12186563_10153428932824219_3838212378576244116_o.j pg?efg=eyJpIjoidCJ9

Looks nice

DutyUse
8 November 2015, 14:40
Here's a pic from Steve Coulston.

https://scontent-atl3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12186563_10153428932824219_3838212378576244116_o.j pg?efg=eyJpIjoidCJ9

That looks really good. Would make a good truck gun. Wonder what the OAL is

tact
8 November 2015, 19:22
From what I can find the MVB is 4 7/8" and the LWRC Ultra Compact is about 6". I've used the LWRC and really liked it, I haven't used the MVB though.

http://images.tapatalk-cdn.com/15/11/08/dcc0e6b1cca6eb52ad76a9f0d29968ea.jpg

GOST
10 November 2015, 06:15
http://rhinoarms.com/wp-content/uploads/2015/09/PDW-1000x1000-4.jpg

Don't know if this one has anymore clearance, but it's the shortest PDW style stock kit I've seen. It's collapsed length is 3.4" opposed to the MVB's 4.875". Not cheap though.

http://rhinoarms.com/product/ap-custom-pdw-stock-system/#prettyPhoto