Fathom_Arms
12 November 2015, 18:06
Hello Everyone,
This is our first time really letting everyone know what we have been up to. We are offering those on WEVO the chance to preorder these matched sets first before we do the official press release. These sets are available for order on our website here (http://fathomarms.com/product/ar15-lower-receiver-fathom-arms/).
In collaboration with San Tan Tactical, we present.... The Fathom Edition San Tan Tactical Matched Pillar Receiver Sets!
These sets are back from anodizing and they should hopefully ship out to our customers by the end of next week. Only 16 sets on this first run and 6 sets are already spoken for! 4-5, 8-12, 14-16 are available if you would like to pick your serial number (specify in the order notes and the comments on this thread so everyone will know). These receivers are matched by hand finishing and by the serial number that is CNC engraved on both upper and lower.
Here are the specs:
Upper Specifications:
Truss pockets for increased structural rigidity.
Cut from a single billet 7075 -T651 aerospace grade aluminum.
Shell deflector
Fully Assembled with forward assist, and ejection port cover.
Machined in T markings for easy optic relocation.
Machined with M4 feed ramps.
Machined to mil-spec standards.
Interfaces with all AR15/M16/M4 weapons systems and accessories.
Mil Spec Type III class II hard coat anodized Black
No roll pin design. (Forward assist attaches via threaded dowel pin)
Lightweight- Weighs in at only 8.2 Ounces.
Compatible with a multitude of rail manufacturers anti rotation tabs & Pins including Noveske NSR® rail.
Compatible with all known battery assist lever on the market today.
Backed by STT’s and Fathom Arms unmatched lifetime warranty.
Made in the USA!
Lower Specifications:
Caliber: 5.56 NATO \ .223 REM, 300 BLACKOUT, 22LR, Multi-Cal, Custom Caliber Markings Upon Request
Action: Semi-Auto
Weight: 9.4 Ounces /268 Grams With Ambidextrous Controls 8.4 Ounces / 238 Grams Without Ambidextrous Controls.
Dimensions: Length: 7.69” Width: 1.490” Height: 4.015”
Material: Billet 7075-T651 Aerospace Grade Aluminum, Cast A-2 Tool Steel
Finish: Aluminum – Matte Black MIL-A-8625 Type III Hard Anodize, Steel – Black Oxide
Butt-Stock: Works With Any Mil-Spec or Commercial Buffer Tube and Stock.
Magazine Compatibility: (Lock In, Drop Free Additional Magazines Will Be Added As Tested) 100 Round Beta Mag, 100 Round Surefire,60 Round Surefire, 30 Round Magpul P-MAG Any Generation, 20 Round Magpul P-MAG Any Generation, 10 Round Magpul P-MAG Any Generation, 30 Round Mil- Spec Mag, 20 Round Mil-Spec Mag
Component Compatibility: Works Will All Mil-Spec AR-15\M16 Components*.
*Excluding proprietary ambidextrous controls.
Huge 1.38” Integrally Machined Magazine Well Flare
Ambidextrous Quick Attach \Detach Sling Swivel Points With Anti-Rotation Stops Every 45 Degrees.
Ambidextrous Bolt Release.
Ambidextrous Magazine Release.
Bullet Pictogram Safety Selector Markings.
Set Screw Trigger Creep Adjustment.
Set Screw Upper Take Down Tension Adjustment.
Shooter Ready Finger Rest.
Oversized Winter Trigger Guard.
Dowel Screw Assembly.
Ultra Grip Texture On All Controls.
Here are the anodized pics! Take down pins were used for the photos (to keep it together during photos) and are not included. But everything else is!:o
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5670_zpsac6knttg.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5673_zpsgimcqdlk.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5669_zpszdodnefr.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5672_zpscsznlcrm.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/92fc8f92-32b6-46ee-adbc-d86da135e053_zpsbo3v7ivb.jpg
Here is a shot of the upper and lower getting a hand finished joint.
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_9734_zpsnw7efpwt.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_9735_zpskxc43ax4.jpg
Thanks everyone! Please let me know if you have any questions!
This is our first time really letting everyone know what we have been up to. We are offering those on WEVO the chance to preorder these matched sets first before we do the official press release. These sets are available for order on our website here (http://fathomarms.com/product/ar15-lower-receiver-fathom-arms/).
In collaboration with San Tan Tactical, we present.... The Fathom Edition San Tan Tactical Matched Pillar Receiver Sets!
These sets are back from anodizing and they should hopefully ship out to our customers by the end of next week. Only 16 sets on this first run and 6 sets are already spoken for! 4-5, 8-12, 14-16 are available if you would like to pick your serial number (specify in the order notes and the comments on this thread so everyone will know). These receivers are matched by hand finishing and by the serial number that is CNC engraved on both upper and lower.
Here are the specs:
Upper Specifications:
Truss pockets for increased structural rigidity.
Cut from a single billet 7075 -T651 aerospace grade aluminum.
Shell deflector
Fully Assembled with forward assist, and ejection port cover.
Machined in T markings for easy optic relocation.
Machined with M4 feed ramps.
Machined to mil-spec standards.
Interfaces with all AR15/M16/M4 weapons systems and accessories.
Mil Spec Type III class II hard coat anodized Black
No roll pin design. (Forward assist attaches via threaded dowel pin)
Lightweight- Weighs in at only 8.2 Ounces.
Compatible with a multitude of rail manufacturers anti rotation tabs & Pins including Noveske NSR® rail.
Compatible with all known battery assist lever on the market today.
Backed by STT’s and Fathom Arms unmatched lifetime warranty.
Made in the USA!
Lower Specifications:
Caliber: 5.56 NATO \ .223 REM, 300 BLACKOUT, 22LR, Multi-Cal, Custom Caliber Markings Upon Request
Action: Semi-Auto
Weight: 9.4 Ounces /268 Grams With Ambidextrous Controls 8.4 Ounces / 238 Grams Without Ambidextrous Controls.
Dimensions: Length: 7.69” Width: 1.490” Height: 4.015”
Material: Billet 7075-T651 Aerospace Grade Aluminum, Cast A-2 Tool Steel
Finish: Aluminum – Matte Black MIL-A-8625 Type III Hard Anodize, Steel – Black Oxide
Butt-Stock: Works With Any Mil-Spec or Commercial Buffer Tube and Stock.
Magazine Compatibility: (Lock In, Drop Free Additional Magazines Will Be Added As Tested) 100 Round Beta Mag, 100 Round Surefire,60 Round Surefire, 30 Round Magpul P-MAG Any Generation, 20 Round Magpul P-MAG Any Generation, 10 Round Magpul P-MAG Any Generation, 30 Round Mil- Spec Mag, 20 Round Mil-Spec Mag
Component Compatibility: Works Will All Mil-Spec AR-15\M16 Components*.
*Excluding proprietary ambidextrous controls.
Huge 1.38” Integrally Machined Magazine Well Flare
Ambidextrous Quick Attach \Detach Sling Swivel Points With Anti-Rotation Stops Every 45 Degrees.
Ambidextrous Bolt Release.
Ambidextrous Magazine Release.
Bullet Pictogram Safety Selector Markings.
Set Screw Trigger Creep Adjustment.
Set Screw Upper Take Down Tension Adjustment.
Shooter Ready Finger Rest.
Oversized Winter Trigger Guard.
Dowel Screw Assembly.
Ultra Grip Texture On All Controls.
Here are the anodized pics! Take down pins were used for the photos (to keep it together during photos) and are not included. But everything else is!:o
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5670_zpsac6knttg.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5673_zpsgimcqdlk.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5669_zpszdodnefr.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_5672_zpscsznlcrm.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/92fc8f92-32b6-46ee-adbc-d86da135e053_zpsbo3v7ivb.jpg
Here is a shot of the upper and lower getting a hand finished joint.
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_9734_zpsnw7efpwt.jpg
http://i68.photobucket.com/albums/i1/71Novacaine/IMG_9735_zpskxc43ax4.jpg
Thanks everyone! Please let me know if you have any questions!