PDA

View Full Version : SMOS Build Thread



Pages : [1] 2

Pyzik
5 January 2016, 08:24
EDIT: Thanks to Josh for finding the images and compiling a list!

In order to start out with a decent amount I decided to include complete builds as well as complete uppers.

Table of Contents

Post 98: fledge - 13.7" rail/18" barrel (upper only) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=124968#post124968)
Post 197: titanse05 - 13.7" rail/16" barrel/Magpul STR (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=125730#post125730)
Post 214: E03 - 13.7" rail/14.5" barrel/Magpul CTR (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=125833#post125833)
Post 317: Pyzik - Parallax TiN BCG/CMC Flat trigger (complete rifle...sorta) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=127168#post127168)
Post 333: Jinxy - 13.7" rail/16" barrel with suppressor/Magpul MOE-SL (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=127360#post127360)
Post 405: Josh S. - 13.7" rail/20" barrel/Magpul PRS (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=128232#post128232)
Post 407: jataylor - 13.7" rail/16" barrel/B5 SOPMOD (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=128853#post128853)
Post 413: JSchell1309 - 12" rail/16" barrel/Magpul CTR (complete rifle) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=128963#post128963)
Post 424: fledge - 9" rail/10.3" barrel/Dead Air muzzle brake (upper only) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=129051#post129051)
Post 440: jataylor11 - 12" rail/16" barrel/B5 Sopmod (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=129680#post129680)
Post 442: Josh S - 13.7" rail/20" barrel/PRS (Complete precision build) (http://www.weaponevolution.com/forum/showthread.php?8774-SMOS-Build-Thread&p=129877#post129877)


Okay, so I'm super excited and was already making a list for myself and figured I might as well put it here.

SMOS GFY-15 Upper, Lower & Rail ✔
CMC Flat Trigger ✔
BCM Mod 3 Charging Handle ✔
MOE K2 ✔
Strike Industries mag release ✔ - w/Forward Controls Button ✔
Strike Industries Pins ✔
BADASS ✔
Strike Ind. Dust Cover ✔
Standard buffer, ect. ✔
TiN Parallax BCG ✔
New BCM Stock (old BCM stock for now) ✔
Barrel... ?
Griffin Ind. Taper Mount (Minimalist flash hider?)
Giggity. ✔✔✔✔✔✔

UWone77
5 January 2016, 08:40
Someone is excited!

So what kind of gun are you looking to build? 16" 14.5" SBR? SPR?

Pyzik
5 January 2016, 08:42
Someone is excited!

So what kind of gun are you looking to build? 16" 14.5" SBR? SPR?

16" unless the rail is shorter, then I'll go SBR. [:D]

Dstrbdmedic167
5 January 2016, 08:53
Rail is 13.7" IIRC. 16" would go well with it.

Pyzik
5 January 2016, 08:56
Rail is 13.7" IIRC. 16" would go well with it.
That was my impression as well

Sent from my SM-N910V using Tapatalk

titanse05
5 January 2016, 15:18
I'm going 16" with mine. Should look great.

I already have most of the parts on hand for the upper that I'm transferring from a lower that I SBR'd. Got to pickup a grip, stock, buffer tube, buffer, end plate, castle nut, and M-LOK handstop and I'll be set.

Pyzik
5 January 2016, 15:28
I'm going 16" with mine. Should look great.

I already have most of the parts on hand for the upper that I'm transferring from a lower that I SBR'd. Got to pickup a grip, stock, buffer tube, buffer, end plate, castle nut, and M-LOK handstop and I'll be set.
Oops, forgot the handstop of some sort.

I wish I could get the NSR rail panels to work with the rail. I love them.

Sent from my SM-N910V using Tapatalk

titanse05
5 January 2016, 15:38
Oops, forgot the handstop of some sort.

I wish I could get the NSR rail panels to work with the rail. I love them.

Sent from my SM-N910V using TapatalkI'm a fan of the Magpul offering. I have a couple of them already. Recommended you give it a try.

Dstrbdmedic167
5 January 2016, 15:39
Arisaka Fingerstop.. 'Nuff said lol

Deadwing
5 January 2016, 17:46
So far, I've got the following set aside for my SMOS build: Forward Controls Design ABC/R-F and EMR, BAD-CASS safety, Geissele SSA, SilencerCo Trifecta FH, and UCWRG Raptor CH. The rest is TBD.

Josh S.
5 January 2016, 17:53
Does anyone know where the muzzle of a 13.7" barrel will be in relation to the end of the 13.7" rail? I'm hoping it will sit a little further back so a Noveske KX5 will sit just inside the handguard. I may just have to SBR it and get an 11.5" or 12.5" barrel.

GaSwamper
5 January 2016, 18:26
I don't see a "magic" bullet button listed, I here those are quite popular now days lol.
On a serious note I've been seeing alot of guys really liking the Luth stocks, think I may give one a try myself next.

Pyzik
5 January 2016, 18:32
Deadwing, that's quite the list!

Sent from my SM-N910V using Tapatalk

Deadwing
5 January 2016, 19:03
Deadwing, that's quite the list!

Sent from my SM-N910V using Tapatalk

Thanks! Your list isn't looking too shabby either!

I forgot to include BAD-EPS on my list. I may copycat you and go with the V7 port door. I've been wanting to try one for a while.

voodoo_man
5 January 2016, 21:22
Nothing yet....check

Pyzik
6 January 2016, 05:48
Thanks! Your list isn't looking too shabby either!

I forgot to include BAD-EPS on my list. I may copycat you and go with the V7 port door. I've been wanting to try one for a while.

I guess I could let you copy me. :p
I MAY switch to the BAD pins depending on how the Strike Ind. look.

Pyzik
6 January 2016, 12:37
Well I was going to order some small parts but NO ONE has all that I want in stock in one place. Dang it.

titanse05
6 January 2016, 12:48
Well I was going to order some small parts but NO ONE has all that I want in stock in one place. Dang it.
I had the same problem. In additon to some parts for my lower that I needed I ended up ordering parts for a complete rifle for a coworker. I've placed 9 seperate orders the last 24 hours.

RiverRat
6 January 2016, 16:33
David -

Was it your intention that this was a site-wide SMOS build compilation (everyone contributes their plans and progress here) - or would you prefer to keep this focused on your project? I don't want to step on your thread if you want to keep it focused.

Either way, it's cool that these GFY sets will all be built soon since few of us will be waiting on stamps.

Pyzik
6 January 2016, 16:59
David -

Was it your intention that this was a site-wide SMOS build compilation (everyone contributes their plans and progress here) - or would you prefer to keep this focused on your project? I don't want to step on your thread if you want to keep it focused.

Either way, it's cool that these GFY sets will all be built soon since few of us will be waiting on stamps.

I say everyone pile in. If you've got a set inbound let's hear what you're planning.

Sent from my SM-N910V using Tapatalk

Joelski
6 January 2016, 19:26
Come on, 10" rail! I Wanna order the upper set, but I need a shorter one.

mustangfreek
7 January 2016, 01:26
Guess this means your 9mm build is on hold now....I'm still on that kick ... but I'd sidetrack also if this was won...lol.

Pyzik
7 January 2016, 03:11
Guess this means your 9mm build is on hold now....I'm still on that kick ... but I'd sidetrack also if this was won...lol.
It's been on hold. :(

Sent from my SM-N910V using Tapatalk

Deadwing
7 January 2016, 20:56
Well I was going to order some small parts but NO ONE has all that I want in stock in one place. Dang it.

No one place EVER has everything i want to order in stock when i'm ready to buy. It wouldn't be so bad if most places didn't rape you with the shipping costs. I realize that in general, shipping isn't cheap. But when a place wants to charge $7.95 for that horse shit UPS SurePost, when they could've sent it flat rate Priority Mail for a couple bucks less AND got the packing materials FREE from the USPS irks me. Hell, First Class mail is cheaper and faster. But i digress...

I just ordered a Centurion Arms 16" CHF barrel w pinned gas block for my GFY build. It's all starting to come together.

n4p226r
8 January 2016, 02:51
i really wonder if there is some awesome story behind the GFY name.

Joelski
8 January 2016, 03:24
I just ordered a Centurion Arms 16" CHF barrel w pinned gas block for my GFY build. It's all starting to come together.

I'm assuming GFY doesn't stand for "Good For You"... :D

Pyzik
8 January 2016, 06:51
We all know it stands for "Gingers, F**k You".

Deadwing
8 January 2016, 07:54
We all know it stands for "Gingers, F**k You".

LOL!!! Poor gingers...

titanse05
12 January 2016, 05:36
My parts have started rolling in. Hope to have them all by the beginning of next week.

Hope to hear from SMOS that they are shipping soon. I'm chomping at the bit to get this sucker built.

Pyzik
12 January 2016, 05:41
My parts have started rolling in. Hope to have them all by the beginning of next week.

Hope to hear from SMOS that they are shipping soon. I'm chomping at the bit to get this sucker built.
I have a couple small lower parts that should arrive today.

Problem: looks like my 9mm may be back on.... building two ARs at once is gonna hurt.
Especially since I refuse to spend my suppressor money. That could get both done.

Sent from my SM-N910V using Tapatalk

titanse05
12 January 2016, 05:49
I have a couple small lower parts that should arrive today.

Problem: looks like my 9mm may be back on.... building two ARs at once is gonna hurt.
Especially since I refuse to spend my suppressor money. That could get both done.

Sent from my SM-N910V using TapatalkThe stamp for my first suppressor should be arriving at my dealer any day now. Looking forward to picking it up *understatement*.

Pyzik
12 January 2016, 06:14
The stamp for my first suppressor should be arriving at my dealer any day now. Looking forward to picking it up *understatement*.
Haha, I can imagine.
I still have to do everything on my end. Only getting money in order right now.

Sent from my SM-N910V using Tapatalk

titanse05
12 January 2016, 06:32
Haha, I can imagine.
I still have to do everything on my end. Only getting money in order right now.

Sent from my SM-N910V using TapatalkMy ball started rolling in June of last year.....2 months for the dealer-to-dealer transfer and approaching the end of the 5th month on the Form 4. Any day now and my Omega will be home.

Deadwing
12 January 2016, 07:42
I've got everything I need to finish the rifle on hand, except the receivers and hand guard. I haven't heard a peep since I placed my order and spent my money, which is coming up on two weeks ago.

At any rate, of the parts on hand, I'm not 100% decided on what I'll use. CTR or STR? MOE, MIAD, or MOE K2 for the grip? Rainier Arms, Troy, or MBUS Pro for BUIS? And I'll need an optic. I've got a Scalarworks mount, but the optic I was going to use in it got a different mount. Guess I should've ordered the T2 bundle from Scalarworks.

Slippers
12 January 2016, 08:05
Buy it all, try it out, sell what you don't want. Only way to know. :)

Deadwing
12 January 2016, 08:22
Buy it all, try it out, sell what you don't want. Only way to know. :)

I've already got all that sitting in my pile-o-parts. [BD] I'm just trying to decide what to use on this build. One of your finger stops may be in order as well.

DutyUse
12 January 2016, 10:10
Have you tried the new SL furniture yet?

SINNER
12 January 2016, 10:33
My ball started rolling in June of last year.....2 months for the dealer-to-dealer transfer and approaching the end of the 5th month on the Form 4. Any day now and my Omega will be home.

I spoke with a man at the ATF the other day and he said they have been having issues from an address change on a form. Apparently August was a month where the issues hit the worst. I have got back stamps on 2 cans purchased at the end of September but I'm still waiting on the stamps for 2 Sakers purchased mid August. One big plus is the SBR's I filed in November already have been approved.

titanse05
12 January 2016, 11:54
I spoke with a man at the ATF the other day and he said they have been having issues from an address change on a form. Apparently August was a month where the issues hit the worst. I have got back stamps on 2 cans purchased at the end of September but I'm still waiting on the stamps for 2 Sakers purchased mid August. One big plus is the SBR's I filed in November already have been approved.Yeah that figures. My first foray into NFA and something causes a delay. I submitted my first Form 1 in early September and got approval in December. I submitted my second Form 1 on Dec 28th and am glad I got in before the rush.

Deadwing
12 January 2016, 12:06
Have you tried the new SL furniture yet?

I have not. Don't know much about it other than it exists.

DutyUse
12 January 2016, 14:00
I've tried most of the Magpul stuff and the SlimLine stuff is some of my favorites. But I got small mitts. When in doubt you can't go wrong with the Miad

Slippers
12 January 2016, 16:18
I love the SL stock over the CTR, but found the SL grip to be a little bit too thin. I don't have particularly big hands, either. The MIAD and normal MOE grips are still my favorites.

UWone77
12 January 2016, 16:25
I love the SL stock over the CTR, but found the SL grip to be a little bit too thin. I don't have particularly big hands, either. The MIAD and normal MOE grips are still my favorites.

I really like the SL furniture, but I agree, the SL grip is a tad on the thin side. The MIAD and STR is my favorite combo.

Deadwing
12 January 2016, 17:06
I've tried most of the Magpul stuff and the SlimLine stuff is some of my favorites. But I got small mitts. When in doubt you can't go wrong with the Miad

I've got big hands. Probably why i really never gave the SlimLine stuff more than a glance.


I love the SL stock over the CTR, but found the SL grip to be a little bit too thin. I don't have particularly big hands, either. The MIAD and normal MOE grips are still my favorites.


I really like the SL furniture, but I agree, the SL grip is a tad on the thin side. The MIAD and STR is my favorite combo.

MIAD and standard MOE grips are my favorites. I favor the MIAD, but own more MOEs simply because of cost. Out of the Magpul stock line, the STR is my favorite, but i also like the CTR a lot. Branching out, i'm still a big fan of the SOPMOD stock as well.

Pyzik
12 January 2016, 17:09
Well a small something came in.... Strike Industries mag catch paired with a Forward Controls Design EMR button.

https://farm2.staticflickr.com/1572/24237301362_5f18b5100c_b.jpg
(https://flic.kr/p/CVLvhf)Strike Ind. Mag Catch (https://flic.kr/p/CVLvhf) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Pyzik
12 January 2016, 17:10
You're all nuts. K2 is where it's at.

titanse05
12 January 2016, 17:13
I'm a MOE+ and STR guy myself.

Deadwing
12 January 2016, 17:34
You're all nuts. K2 is where it's at.

I like the K2 as well. I have a couple that replaced my BCM Mod 1 grips. If the K2 had been on the market sooner i might have more of them. The K2 is still a possibility for this build as I've got a black one and a gray one looking for homes.

Deadwing
12 January 2016, 17:36
Well a small something came in.... Strike Industries mag catch paired with a Forward Controls Design EMR button.

https://farm2.staticflickr.com/1572/24237301362_5f18b5100c_b.jpg
(https://flic.kr/p/CVLvhf)Strike Ind. Mag Catch (https://flic.kr/p/CVLvhf) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Nice photo. I dig the looks of the Strike Ind. mag catch.

Pyzik
12 January 2016, 17:41
Nice photo. I dig the looks of the Strike Ind. mag catch.
Thanks. That's why I went with it. Wanting this to be a "purdy" build.

Sent from my SM-N910V using Tapatalk

DutyUse
12 January 2016, 17:48
Umbrella grip 23, Magpul SL, Magpul k2. In that order.

Stock wise I really like the SL, and I'm dying to try the SL-K

Deadwing
12 January 2016, 17:56
Umbrella grip 23, Magpul SL, Magpul k2. In that order.

Stock wise I really like the SL, and I'm dying to try the SL-K

I like the Grip 23, but find it to be too slippery in stock form and i'm too lazy to stipple one. [BD]

tact
13 January 2016, 03:02
I like the Grip 23, but find it to be too slippery in stock form and i'm too lazy to stipple one. [BD]

I agree. I found a guy who stipples them on eBay of all places a few months back. It's my absolute favorite grip now.


Sent from my iPhone using Tapatalk

BoilerUp
13 January 2016, 06:46
I agree. I found a guy who stipples them on eBay of all places a few months back. It's my absolute favorite grip now.

Or save yourself time and money and just pick up the BCM Gunfighter Mod 3. I replaced my Grip 23 with the GF and am moving all my grips over to GF. IMO, better contour and texture but pretty much the same angle as the Grip 23. The compartment door is a bonus, too. Pair it with the BCM trigger guard.

https://photos.smugmug.com/photos/i-LcTZntP/0/XL/i-LcTZntP-XL.jpg

Deadwing
13 January 2016, 07:02
Or save yourself time and money and just pick up the BCM Gunfighter Mod 3. I replaced my Grip 23 with the GF and am moving all my grips over to GF. IMO, better contour and texture but pretty much the same angle as the Grip 23. The compartment door is a bonus, too. Pair it with the BCM trigger guard.

https://photos.smugmug.com/photos/i-LcTZntP/0/XL/i-LcTZntP-XL.jpg

Of the BCM line of grips, I like the Mod 3 Gunfighter the best. But I still think it's too thin at the top of the back strap where the web of my hand sits. The Grip 23 is nice and thick in that area, giving my big hands a little extra reach to the trigger and forcing my hand lower, which I find to be more comfortable. I will say that I like the Mod 3 enough that I haven't replaced them on the lowers that came with them.

tact
13 January 2016, 17:02
Or save yourself time and money and just pick up the BCM Gunfighter Mod 3. I replaced my Grip 23 with the GF and am moving all my grips over to GF. IMO, better contour and texture but pretty much the same angle as the Grip 23. The compartment door is a bonus, too. Pair it with the BCM trigger guard.

https://photos.smugmug.com/photos/i-LcTZntP/0/XL/i-LcTZntP-XL.jpg

I gave that horrible grip away.....not a fan of any of them. Had I known I would have sent it to you.


Sent from my iPhone using Tapatalk

DutyUse
13 January 2016, 17:25
I agree. None of the BCMs have been all that great IMO

titanse05
14 January 2016, 05:55
Well my last two parts I need to complete my build are due to arrive today (STR and BAD EPS). Too bad I don't have my lower/upper/handguard winnings in hand to get right to construction. [BD]

Deadwing
14 January 2016, 06:28
I agree. None of the BCMs have been all that great IMO

Other than the thin-ish back strap, the thing I dislike about them most is the small corner just behind the trigger guard pin. It doesn't blend the side of the grip with the receiver trigger guard ear very well and irritates my finger. I always have to spend time with a file removing material to make it comfortable. Magpul grips blend that area much better and are far more comfortable.

Pyzik
14 January 2016, 06:32
Well my last two parts I need to complete my build are due to arrive today (STR and BAD EPS). Too bad I don't have my lower/upper/handguard winnings in hand to get right to construction. [BD]
So jealous. Trying to move some parts to put toward this build but I don't have many spare parts.

Sent from my SM-N910V using Tapatalk

Slippers
14 January 2016, 06:50
Other than the thin-ish back strap, the thing I dislike about them most is the small corner just behind the trigger guard pin. It doesn't blend the side of the grip with the receiver trigger guard ear very well and irritates my finger. I always have to spend time with a file removing material to make it comfortable. Magpul grips blend that area much better and are far more comfortable.

100% agree. I find the BCM grips very uncomfortable due to that area. When you hold the rifle in one hand, like during reloading, all the pressure ends up on your middle finger beneath the trigger guard, and the shape of the BCM grip doesn't help.

Deadwing
14 January 2016, 07:05
So jealous. Trying to move some parts to put toward this build but I don't have many spare parts.

Sent from my SM-N910V using Tapatalk

You're jealous? I'm jealous! I actually had to pay for my GFY goodies! [BD]

Deadwing
14 January 2016, 07:06
100% agree. I find the BCM grips very uncomfortable due to that area. When you hold the rifle in one hand, like during reloading, all the pressure ends up on your middle finger beneath the trigger guard, and the shape of the BCM grip doesn't help.

You hit the nail right on the head, Slippers.

Pyzik
14 January 2016, 07:25
You're jealous? I'm jealous! I actually had to pay for my GFY goodies! [BD]
Oops. Hahah. [emoji1]

Sent from my SM-N910V using Tapatalk

Deadwing
14 January 2016, 07:39
Oops. Hahah. [emoji1]

Sent from my SM-N910V using Tapatalk

LOL :P

titanse05
14 January 2016, 08:05
So jealous. Trying to move some parts to put toward this build but I don't have many spare parts.

Sent from my SM-N910V using TapatalkI had enough stuff to sell to raise around $350 which more than covered the parts needed for this project. Plus I did get in on the upper/handguard combo and sold it too since the whole set is coming. Hated to do it, but it wasn't going to get used so it had to go.

To share the wealth I gave my friend an Aero lower to build his first AR. He paid me for the rest of the parts and I'll finish assembling it either tonight or sometime this weekend.

RiverRat
14 January 2016, 10:36
Still working on figuring out exactly what I want this set to grow into. Current constraints: 14.5-18" barrel, un-suppressed, not specifically ambi-enabled and featuring parts from WEVO group buys/sponsors. Here's the lead candidate assuming that it'll be a upgrade from my current 16" Rainier Select-based build instead of an alternate caliber. Much of the stuff I can re-purpose from other builds or scrape together from bits just lying around - but I would have to invest in the barrel which is what's got me on hold until I'm sure this is the direction I want to head.

Upper Receiver: SMOS GFY (no FA, group buy)
Barrel: Rainier .223 Wylde 16" Ultramatch Fluted SDM profile (sponsor)
Rail: SMOS GFY 13" (group buy)
Muzzle Device: Precision Armament AFAB Mini (could become Griffin Armament Taper Mount)
Bolt Carrier Group: Fathom Arms Standard Melonite FA (group buy, subject to change since it might be a better fit elsewhere)
Charging Handle: BCM Gunfighter Mod 4
Gas Block & Tube: Geissele Lo-Pro Super Gas Block + Generic Tube

Lower Receiver: SMOS GFY-15 (group buy)
Trigger Assembly: Geissele SSA-E or SD-E
Grip: Magpul MOE or MIAD
Buttstock: Magpul STR
Selector: Battle Arms BAD-ASS Std/Sht (could become Rainier)
Mag Release: Forward Controls EMR-C + Generic Catch (sponsor)
Bolt Catch: Forward Controls ABC-R (sponsor)
Extension: BCM 6 Position (could become Griffin Armament)
Action Spring and Buffer: Sprinco Blue + Generic H2 buffer

Small Parts: KNS Turned Pins + Springs TBD

Optic & Mount: SWFA Super Sniper 1-4x24 on Aero Precision Ultralight Extended Mount
BUIS: Magpul MBUS Pro
Light: None (would be Arisaka Scout if it needed a light, but this has more of a bench feel to me)

Mag: Magpul G3 20-round, WEVO etched (group buy).

It probably merits something beyond the 1-4 scope but I don't have anything clearly in mind yet.

Pyzik
14 January 2016, 11:40
RiverRat. Thanks for the heads up. I didn't realize Griffin Armament had things other than suppressors and mounts to be 100% honest.

I was thinking of going with an IMOD stock for this build but the Griffin one looks kind of good.

Aragorn
14 January 2016, 14:29
RiverRat. Thanks for the heads up. I didn't realize Griffin Armament had things other than suppressors and mounts to be 100% honest.

I was thinking of going with an IMOD stock for this build but the Griffin one looks kind of good.


If you're gonna be getting Griffin stuff, might PM them for a discount. I'm not sure where else to find their stock at this point.


Thanks to the WEVO crew for the opportunity to belong to this growing community. We have been long time readers of WEVO and are excited to be involved in a more official manner. Thank you to those who have followed us previously; we wouldn't have the great products we have were it not for consumer support. We are honest, hard working, normal guys and love supporting the 2nd amendment and freedom by cranking out quality kit.

In appreciation for this community we want to offer a WEVO discount code to forum members only. PM us here on the forum for the coupon code which can be used on our website, www.GriffinArmament.Com (http://www.griffinarmament.com)

As far as group buys there isn't a point to having one when you can PM us for a discount code. Its much easier for us and you will get your product faster without having to depend on the logistics of a group buy.

A representative from GRIFFIN will try to be actively involved in this community. However, our main focus is on manufacturing and it is not unusual for us to take a couple days to respond. If you need something ASAP you can always shoot us an email to the info account at griffinarmament.com and we will try to check PM's frequently.

-Griffin STAFF

Josh S.
14 January 2016, 14:49
If you're gonna be getting Griffin stuff, might PM them for a discount. I'm not sure where else to find their stock at this point.

Thanks for the heads up Aragorn! I'm planning on using a few Griffin parts for my SMOS build and another rifle so that'll definitely help.

Deadwing
17 January 2016, 03:58
I was thinking of going with an IMOD stock for this build but the Griffin one looks kind of good.

The IMOD is a great stock. Both functional and stylish. I've got only one gripe with it, and that would be that it likes to grab my beard every now and then.

Pyzik
17 January 2016, 05:29
The IMOD is a great stock. Both functional and stylish. I've got only one gripe with it, and that would be that it likes to grab my beard every now and then.
I've heard that gripe from someone else too. Starting to sound not so fun.

Sent from my SM-N910V using Tapatalk

mustangfreek
17 January 2016, 12:15
You're jealous? I'm jealous! I actually had to pay for my GFY goodies! [BD]

Lol...that was good...
I'm jealous period no Gfy for me


I've heard that gripe from soumeone else too. Starting to sound not so fun.

Sent from my SM-N910V using Tapatalk

Ya I tried one for a whole 5 minutes and couldn't stand this.. Haha.

Deadwing
18 January 2016, 01:23
I've heard that gripe from someone else too. Starting to sound not so fun.

Sent from my SM-N910V using Tapatalk

It's kind of a drag. I was clean-shaven when i first got an IMOD, and loved it. But once i grew my beard back, i put a SOPMOD on that gun and the IMOD went to a gun i don't shoot much.

titanse05
18 January 2016, 11:43
So no one has received the GFY build package yet? I got all of the other parts in hand now. Just need the receivers and handguard.

Mecha_Arms
21 January 2016, 16:25
The IMOD is a great stock. Both functional and stylish. I've got only one gripe with it, and that would be that it likes to grab my beard every now and then.

I had a similar problem with an EMOD. Still like the stock, but I've been mulling over replacing it with something else.

EO3
22 January 2016, 12:13
I bought the full set, and I can't decide on a few things. My set is off to get Cerakoted in Magpul FDE right now[:D]
Here's what I have so far:

Upper -
GFY Receiver
V7 Lightweight Door
Lantac E-BCG
(Not sure about CH, eyeballing the new Geissele ambi one)
GFY Rail
(Not sure about barrel - Either 16" or 18" - anyone have suggestions? (been looking at Ballistic Advantage Hanson Series))
(also haven't picked a muzzle device)

Lower -
GFY Receiver
CMC Flat 3.5
BAD EPS Pins
BAD ASS Safety
Strike Industries Mag Release
Strike Industries Bolt Catch/Release
Magpul K2+
(Can't decide on Magpul MOE Fixed Rifle Stock or Magpul SL-S or STR)

Optic options are wide open - Haven't really picked this rifle's purpose yet.

Anyone have any suggestions on any of this?

Deadwing
22 January 2016, 17:55
I had a similar problem with an EMOD. Still like the stock, but I've been mulling over replacing it with something else.

I've got an EMOD on my SPR that i keep thinking about replacing as well. It's a great stock, but damn the beard pulling. I may just replace it with a SOPMOD, which is still one of my favorites.

UWone77
22 January 2016, 17:57
I bought the full set, and I can't decide on a few things. My set is off to get Cerakoted in Magpul FDE right now[:D]
Here's what I have so far:

Upper -
GFY Receiver
V7 Lightweight Door
Lantac E-BCG
(Not sure about CH, eyeballing the new Geissele ambi one)
GFY Rail
(Not sure about barrel - Either 16" or 18" - anyone have suggestions? (been looking at Ballistic Advantage Hanson Series))
(also haven't picked a muzzle device)

Lower -
GFY Receiver
CMC Flat 3.5
BAD EPS Pins
BAD ASS Safety
Strike Industries Mag Release
Strike Industries Bolt Catch/Release
Magpul K2+
(Can't decide on Magpul MOE Fixed Rifle Stock or Magpul SL-S or STR)

Optic options are wide open - Haven't really picked this rifle's purpose yet.

Anyone have any suggestions on any of this?

Good list of parts, but like you said, until you figure out the purpose of the gun, it will be hard to tweak.

EO3
22 January 2016, 18:17
I think I've decided I want to go lightweight with it and make it all purpose. I'd go with a 14.5", but I'm so indecisive about muzzle devices, I can't get myself to pin and weld one, and don't want to SBR it.

So.... I guess, suggestions for a lightweight build, anyone?

Dstrbdmedic167
22 January 2016, 18:41
I think I've decided I want to go lightweight with it and make it all purpose. I'd go with a 14.5", but I'm so indecisive about muzzle devices, I can't get myself to pin and weld one, and don't want to SBR it.

So.... I guess, suggestions for a lightweight build, anyone?

Going off that I'd probably use a Magpul SL stock and grip vs the above mentioned. Optics would be a red dot like an aimpoint t1(or similar) or the Trijicion MRO or something in those categories.

UWone77
22 January 2016, 19:49
I'm not sure a Billet Set would be the way to go on LW build.

EO3
22 January 2016, 20:13
I'm not sure a Billet Set would be the way to go on LW build.

Wonder how many ounces we're talking between this set and a forged set? Maybe I should be a little more specific. I definitely want to keep it lightweight, but I'm not necessarily going for BAD-LW and titanium parts lightweight, just light enough to run drills with and run around with, if that makes sense.

Has anyone tried out the Ballistic Advantage LW Hanson Barrels?

Dstrbdmedic167
22 January 2016, 20:18
Has anyone tried out the Ballistic Advantage LW Hanson Barrels?

Yes!?! I have the 18" standard version. So far I've been thoroughly impressed. The ballistic advantage Hanson series is one of my favorite barrels out there.

As far as the billet vs forged. As long as your not going for BAD-LW as you mentioned the billet will work but as UW mentioned isn't the lightest overall. [Insert billet vs Forged Debate]

Deadwing
22 January 2016, 20:36
I purchased a 16" Hanson a few months back when it was their barrel of the week. I think i paid $189 shipped, and that included a pinned low profile gas block. I share Dstrbdmedic's opinion...i'm impressed.

EO3
22 January 2016, 20:39
Yes!?! I have the 18" standard version. So far I've been thoroughly impressed. The ballistic advantage Hanson series is one of my favorite barrels out there.

As far as the billet vs forged. As long as your not going for BAD-LW as you mentioned the billet will work but as UW mentioned isn't the lightest overall. [Insert billet vs Forged Debate]

Good to hear! I'm looking at the 16" .223 Wylde Stainless Lo Pro. Just can't decide if I'd want to throw a 1-4/1-6x on top or a red dot with a magnifier...

EO3
22 January 2016, 20:40
I purchased a 16" Hanson a few months back when it was their barrel of the week. I think i paid $189 shipped, and that included a pinned low profile gas block. I share Dstrbdmedic's opinion...i'm impressed.

Sounds like it'll be money well spent if I go with a BA Hanson.

fledge
22 January 2016, 21:39
The SMOS set is 18.3oz. a typical forged set is 17oz. Not much difference.

If you want lightweight, look at Faxon pencil barrels. 17.5oz for 14.5 and 19oz for 16". Not designed for precision once heated up but if your purpose is short range defensive, you're in biz.

EO3
22 January 2016, 22:27
The SMOS set is 18.3oz. a typical forged set is 17oz. Not much difference.

If you want lightweight, look at Faxon pencil barrels. 17.5oz for 14.5 and 19oz for 16". Not designed for precision once heated up but if your purpose is short range defensive, you're in biz.

Thanks for the weight info!

I've got a Faxon 14.5" Gunner Profile right now, and I really like it. I'm pretty much between a BA Hanson 16" or a Faxon Gunner 16" for this build.

fledge
23 January 2016, 06:51
Roger that. I've got an 18" gunner for my other SMOS upper.

UWone77
23 January 2016, 07:15
The SMOS set is 18.3oz. a typical forged set is 17oz. Not much difference.

If you want lightweight, look at Faxon pencil barrels. 17.5oz for 14.5 and 19oz for 16". Not designed for precision once heated up but if your purpose is short range defensive, you're in biz.

Typically, when you build a LW gun, comparable parts are only saving a few ounces, but when the entire gun is put together, the totality of the savings is where it's at.

Having said that, I'm not a fan of LW builds.

Pyzik
23 January 2016, 07:32
Okay, back to the grind and thinking about when this set will arrive. Haha.

Cool thing is I got to play with BCM's new SOPMOD stock against the IMOD. While I still think the IMOD is better looking I'll probably go with the BCM to save face hairs.

Sent from my SM-N910V using Tapatalk

titanse05
23 January 2016, 09:09
Okay, back to the grind and thinking about when this set will arrive. Haha.I'm with you man..... Got a box of parts ready to roll. I hope they get it shipped soon. I'm jealous looking at everyone else's sets. :)

EO3
23 January 2016, 09:27
Roger that. I've got an 18" gunner for my other SMOS upper.

Can you share a picture of that upper? Curious to see what the 13.75" handguard looks like with an 18" barrel.

Deadwing
23 January 2016, 19:05
Okay, back to the grind and thinking about when this set will arrive. Haha.

Cool thing is I got to play with BCM's new SOPMOD stock against the IMOD. While I still think the IMOD is better looking I'll probably go with the BCM to save face hairs.

Sent from my SM-N910V using Tapatalk

I haven't handled the SOPMOD version of BCM's stock, but i really like Mod 0 stock. I wasn't keen on it's looks at first, but it's grown on me.

Pyzik
23 January 2016, 20:25
I haven't handled the SOPMOD version of BCM's stock, but i really like Mod 0 stock. I wasn't keen on it's looks at first, but it's grown on me.
Me either on looks. I think the SOPMOD looks better. I was lucky enough to try them side by side at SHOT and find the new one feels better and looks better.

Sent from my SM-N910V using Tapatalk

Deadwing
23 January 2016, 21:27
Me either on looks. I think the SOPMOD looks better. I was lucky enough to try them side by side at SHOT and find the new one feels better and looks better.

Sent from my SM-N910V using Tapatalk

Since the BCM stock is modular in design, i wonder if the cheek rest pieces will be available for purchase by themselves for retrofit to existing stocks.

fledge
23 January 2016, 23:45
Can you share a picture of that upper? Curious to see what the 13.75" handguard looks like with an 18" barrel.

Few crappy cell pics taken just now. Upper is waiting to head to cerakote which is why gas block looks slightly canted. Everything is on loose. Sorry for the lighting. But you get the idea.

http://i1291.photobucket.com/albums/b556/fledge2000/Seabees%20build/D9E2470E-3F90-4967-857C-33031072F16B_zpsu6hlnjoi.jpg (http://s1291.photobucket.com/user/fledge2000/media/Seabees%20build/D9E2470E-3F90-4967-857C-33031072F16B_zpsu6hlnjoi.jpg.html)

http://i1291.photobucket.com/albums/b556/fledge2000/Seabees%20build/897F8300-6BBB-42EF-8497-6BFB36DBF942_zpsagu3bsxw.jpg (http://s1291.photobucket.com/user/fledge2000/media/Seabees%20build/897F8300-6BBB-42EF-8497-6BFB36DBF942_zpsagu3bsxw.jpg.html)

http://i1291.photobucket.com/albums/b556/fledge2000/Seabees%20build/96C55FE0-8115-43B4-8761-A500EC8072E2_zpsr4oh9sk7.jpg (http://s1291.photobucket.com/user/fledge2000/media/Seabees%20build/96C55FE0-8115-43B4-8761-A500EC8072E2_zpsr4oh9sk7.jpg.html)

http://i1291.photobucket.com/albums/b556/fledge2000/Seabees%20build/3FD646AD-E6A9-42D9-AE0F-D11430952E48_zpsewppu5ro.jpg (http://s1291.photobucket.com/user/fledge2000/media/Seabees%20build/3FD646AD-E6A9-42D9-AE0F-D11430952E48_zpsewppu5ro.jpg.html)

EO3
24 January 2016, 07:10
Thanks for the pics, fledge! Looks like the gas block hides right up front with the rail!

Pyzik
25 January 2016, 18:54
Score. Shipped today!!

Sent from my SM-N910V using Tapatalk

titanse05
26 January 2016, 05:14
Score. Shipped today!!

Sent from my SM-N910V using TapatalkGoodie, goodie......I hope that means mine will ship soon as well.

Josh S.
27 January 2016, 09:05
Picked up my SMOS parts yesterday! The lower is halfway complete so far with a set of titanium BAD-EPS, BAD-ASS safety, MOE K2+ grip, and LMT buffer assembly. I haven't decided on a trigger or stock but I will probably go with an MFT Minimalist and Geissele SD-C. Also ordering a Forward Controls EMR-C and polished ABC/R-F next week.

http://i1220.photobucket.com/albums/dd443/Pigman_Jr/SMOS1_zpslzdqrcvj.jpg (http://s1220.photobucket.com/user/Pigman_Jr/media/SMOS1_zpslzdqrcvj.jpg.html)

http://i1220.photobucket.com/albums/dd443/Pigman_Jr/SMOS2_zpsh9rid2ce.jpg (http://s1220.photobucket.com/user/Pigman_Jr/media/SMOS2_zpsh9rid2ce.jpg.html)

Pyzik
27 January 2016, 09:12
Awesome! Nice pics, Josh! Did you Cerakote it or is it just the pics making it look grey?

Josh S.
27 January 2016, 09:21
Awesome! Nice pics, Josh! Did you Cerakote it or is it just the pics making it look grey?

Thanks! It's all black, I'm still trying to figure out Photoshop and it came out a little gray. If I would've posted the original pics y'all would be asking if I Cerakoted everything blue lol!

I actually have been considering getting it cerakoted a Titanium/Dark Gray finish, similar to the bottom pic. I'm tempted to do it but you just can't go wrong with black...

Pyzik
27 January 2016, 09:57
Thanks! It's all black, I'm still trying to figure out Photoshop and it came out a little gray. If I would've posted the original pics y'all would be asking if I Cerakoted everything blue lol!

I actually have been considering getting it cerakoted a Titanium/Dark Gray finish, similar to the bottom pic. I'm tempted to do it but you just can't go wrong with black...
I know exactly what you're going through! Haha.

It looks awesome grey, you had me thinking... haha.

This is going to be a "purdy" build for me. Not just functional so I'm considering cerakote too.

Sent from my SM-N910V using Tapatalk

titanse05
27 January 2016, 10:17
I just got the call that mine has arrived at my FFL. Never got an email but who cares! LOL

Did everyone else's complete sets ship to their FFLs?

Josh S.
27 January 2016, 10:37
I know exactly what you're going through! Haha.

It looks awesome grey, you had me thinking... haha.

This is going to be a "purdy" build for me. Not just functional so I'm considering cerakote too.

Sent from my SM-N910V using Tapatalk

I hear ya. Mine's going to be rocking titanium takedown pins, polished mag release, polished bolt catch, NiB BCG, and a gray BHW honeycomb fluted barrel. Gonna be a purdy build for sure, yet as functional as they come.

On a sidenote, are there any graphic design companies that offer firearm renderings? In the show truck world, practically every SEMA truck owner has a rendering done to visualize the build before investing a ton of money in the truck. I'm curious if there is anything similar for firearms. Personally, I wouldn't mind spending +/- $100 to get a visual of an AR before dropping coin on anything. Just look up "KegMedia" on Instagram to see what I'm talking about.

titanse05
27 January 2016, 11:10
On a sidenote, are there any graphic design companies that offer firearm renderings? In the show truck world, practically every SEMA truck owner has a rendering done to visualize the build before investing a ton of money in the truck. I'm curious if there is anything similar for firearms. Personally, I wouldn't mind spending +/- $100 to get a visual of an AR before dropping coin on anything. Just look up "KegMedia" on Instagram to see what I'm talking about.The only one that I know of is the GUNSTRUCTION software offered on ARFCOM. I have used it and it works well for the inventory they have. Only problem with it is it doesn't have every part and it is hard to assemble an entire rifle to your actual preferences. However, it is still a pretty great tool.

Pyzik
27 January 2016, 11:15
The only one that I know of is the GUNSTRUCTION software offered on ARFCOM. I have used it and it works well for the inventory they have. Only problem with it is it doesn't have every part and it is hard to assemble an entire rifle to your actual preferences. However, it is still a pretty great tool.
I was going to post the same thing. There are a lot of company's products on there but there are also a TON that are not. You'll have to choose things that are "close".

Sent from my SM-N910V using Tapatalk

Josh S.
27 January 2016, 13:30
Thanks guys, I'll have to check that out.

After taking apart the upper/lower a couple dozen times I've decided I will NEVER own another AR without a set of BAD-EPS or maybe Rainier pins. Night and day difference over stock pins.

http://i1220.photobucket.com/albums/dd443/Pigman_Jr/BAD4_zps6eyvptj6.jpg (http://s1220.photobucket.com/user/Pigman_Jr/media/BAD4_zps6eyvptj6.jpg.html)

Pyzik
27 January 2016, 13:52
Thanks guys, I'll have to check that out.

After taking apart the upper/lower a couple dozen times I've decided I will NEVER own another AR without a set of BAD-EPS or maybe Rainier pins. Night and day difference over stock pins.

http://i1220.photobucket.com/albums/dd443/Pigman_Jr/BAD4_zps6eyvptj6.jpg (http://s1220.photobucket.com/user/Pigman_Jr/media/BAD4_zps6eyvptj6.jpg.html)
Hahaha! I've said the same thing! Trying the Strike Ind this time 'round.

Sent from my SM-N910V using Tapatalk

titanse05
27 January 2016, 15:29
Planning on picking mine up tomorrow after work. Excited.

EO3
27 January 2016, 17:01
On a sidenote, are there any graphic design companies that offer firearm renderings? In the show truck world, practically every SEMA truck owner has a rendering done to visualize the build before investing a ton of money in the truck. I'm curious if there is anything similar for firearms. Personally, I wouldn't mind spending +/- $100 to get a visual of an AR before dropping coin on anything. Just look up "KegMedia" on Instagram to see what I'm talking about.

Josh, I may be able to help you out to some extent. Don't know if it'd be as good as the the KegMedia renderings, but I've gotten pretty good at using photoshop to piece together builds to get a decent idea of what they will look like. Certainly not perfect. It also helps when the products have good photos that o can use.

Josh S.
27 January 2016, 18:03
Josh, I may be able to help you out to some extent. Don't know if it'd be as good as the the KegMedia renderings, but I've gotten pretty good at using photoshop to piece together builds to get a decent idea of what they will look like. Certainly not perfect. It also helps when the products have good photos that o can use.

I appreciate it, EO3. I'm probably not gonna go too crazy with this one, but I may be in contact with you somewhere down the road. I'd definitely be interested for future builds.

Ride4frnt
27 January 2016, 18:22
Regarding a possible future build...if the WEVO deal still on or am I late to the party? I'm trying to decide what I'm gonna do here.

Josh S.
27 January 2016, 18:32
Regarding a possible future build...if the WEVO deal still on or am I late to the party? I'm trying to decide what I'm gonna do here.

I would ask Chris or Stick to get a definite answer, but I think the WEVO deal is over. They have the complete set on their website for $525 though which isn't bad at all IMO, especially when you consider Noveske wants $610 for just the receivers.

fledge
27 January 2016, 18:56
Josh, looking great already! I like the BAD pins too. The V7 pins are good for an understated/duty appearance. I like the 2a pins as well but they have sharp edges when pushing them out.

I've no idea what theme to go with mine yet.

Josh S.
27 January 2016, 19:22
Josh, looking great already! I like the BAD pins too. The V7 pins are good for an understated/duty appearance. I like the 2a pins as well but they have sharp edges when pushing them out.

I've no idea what theme to go with mine yet.

Thanks fledge! I strongly considered the V7 pins but I wanted something flashy for this gun lol.

Btw, what would y'all say is the average transfer fee for "new" firearms?
The FFL I used charged me an $85 fee which I thought was outrageous. Luckily they gave me the option of buying $85 worth of stuff so I picked up an MBUS rear sight and Magpul grip. In the future I'll definitely be using a shop down the road who charges $35...

Pyzik
27 January 2016, 19:25
Thanks fledge! I strongly considered the V7 pins but I wanted something flashy for this gun lol.

Btw, what would y'all say is the average transfer fee for "new" firearms?
The FFL I used charged me an $85 fee which I thought was outrageous. Luckily they gave me the option of buying $85 worth of stuff so I picked up an MBUS rear sight and Magpul grip. In the future I'll definitely be using a shop down the road who charges $35...
$85!?!?!?
It's gotta be to scare off customers simply because he doesn't like or want to do them.

Mine charges $20.

Sent from my SM-N910V using Tapatalk

EO3
27 January 2016, 19:26
Thanks fledge! I strongly considered the V7 pins but I wanted something flashy for this gun lol.

Btw, what would y'all say is the average transfer fee for "new" firearms?
The FFL I used charged me an $85 fee which I thought was outrageous. Luckily they gave me the option of buying $85 worth of stuff so I picked up an MBUS rear sight and Magpul grip. In the future I'll definitely be using a shop down the road who charges $35...

YIKES! Mine also only charges $20, so $35 even seems high to me. $85 is higher than I've ever seen though!!

Dstrbdmedic167
27 January 2016, 19:32
$85 is crazy!?! Mine charges $20 as well with the occasional "it's on me" at least you did get to buy some useable parts vs just throwing the money away

Josh S.
27 January 2016, 19:37
Just making sure it wasn't just me who thought $85 was crazy. I'm now boycotting 3 shops in my area and counting lol. I think I found a decent shop last week so I'm going to use them for a while and see how I like them. It's the same shop who charges $35 so hopefully it works out.

fledge
27 January 2016, 20:00
$25 for first, $10 for each additional on same form. I have one that does $15 but he's not organized and takes forever. So I choose convenience over cost.

DeviantLogic
27 January 2016, 20:10
The highest I've seen is $65. This is a larger gun shop who's sales guys openly admit the store doesn't want to be in the business of FFL transfers. The items they keep in stock for direct sales are very competitively priced though.

Deadwing
27 January 2016, 20:10
I had an FFL that was 5 minutes from my house and charged $20/transfer, but he moved an hour south. Grrrr... Now i'm back to using Rainier Arms, who charges $35 (which is a bit steep imho). I could probably find someone a bit closer and a bit cheaper, but at least i know i can trust RA.


Btw, what would y'all say is the average transfer fee for "new" firearms?
The FFL I used charged me an $85 fee which I thought was outrageous. Luckily they gave me the option of buying $85 worth of stuff so I picked up an MBUS rear sight and Magpul grip. In the future I'll definitely be using a shop down the road who charges $35...

Look at it as a free transfer with an $85 purchase, and it does't look so bad. i probably spend at least that much on other stuff when i have a transfer to pick up, and i still pay the $35 transfer fee. Not a bad deal if you have other things you need to purchase, but i sure wouldn't use them if all i wanted was a transfer.


$85 is crazy!?! Mine charges $20 as well with the occasional "it's on me" at least you did get to buy some useable parts vs just throwing the money away

I need to find an FFL like yours. With as much stuff as i buy, getting a transfer on the house once in a while would be nice.

Josh S.
27 January 2016, 20:15
$25 for first, $10 for each additional on same form. I have one that does $15 but he's not organized and takes forever. So I choose convenience over cost.

Man I'm jealous haha. You would think competent, cooperative gun shops would be easy to come by in Texas but apparently that isn't the case. I know they're out there but I have yet to find one.

mustangfreek
28 January 2016, 03:15
Dead wing- Jeff at sound loan in Everett does all mine and does many and is always quick to call..etc..$15 for first 2 and $7.50 on..cheapest around..

Joelski
28 January 2016, 04:06
My guy is 2 miles from my house and charges $15 for lowers and $20 for complete firearms, plus he texts me when my stuff is out for delivery. That way, he's my first stop after work.

titanse05
28 January 2016, 15:20
Eagle has landed..... :)

Deadwing
28 January 2016, 18:53
Dead wing- Jeff at sound loan in Everett does all mine and does many and is always quick to call..etc..$15 for first 2 and $7.50 on..cheapest around..

Thanks for the tip. That's a helluva deal.

tappedandtagged
29 January 2016, 07:58
I've fortunate enough to have a few shops that know me and do no cost transfers. The norm around here is $20.

titanse05
30 January 2016, 07:23
Well my build most definitely started off on the wrong foot last night. I started with the lower and with the hardest part of the LPK installation, the bolt catch. I've installed at least half a dozen of these bastards without issue but this time was different.

I started the roll pin with a starter punch and it seemed to be a bit stubborn but it was going fine..... until I switched to a roll pin punch to drive it the rest of the way. The roll pin started mushrooming shortly before being all the way "home". So I decided to remove it and try it again with a new pin. That is when the real fun started. The pin would not drive back out, ended up snapping the punch off and it jammed up causing the whole thing to be locked up. After trying just about everything to free the broken pin and punch I ended up having to cut the damn bolt catch out.

Anyway, even after I taped the crap out of the lower I still boogered up the lower around the roll pin ears and the bump out forward of the bolt catch which was caused by the punch breaking while trying to drive the pin out. I think I can hide it for the most part but I am not happy with myself. This set is just too purty to damage during assembly.

Obsenities were most certainly flying.

Well I did get the rest of the rifle assembled and will just have to order a new bolt catch to complete the build. Probably going with an Forward Controls ABC/R Forged. I was surprised how easy the bolt catch paddle broke off with moderate pressure so I won't be using mil-spec versions anymore.

Now for a couple pictures.

WARNING: PICTURES ARE NOT FOR THE WEAK HEARTED.

Almost completed photos will follow once the paint dries :)


http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160129_224810_zpsvln33syo.jpg

http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160129_224830_zpsdrsziyx5.jpg

Pyzik
30 January 2016, 07:27
My God man! What have you done? 😖 😫

That sucks man. I don't usually take too much care in assembling as I know I'm going to mark the gun up with use anyway. But I'll be taking my time and being careful with this one.

Sent from my SM-N910V using Tapatalk

titanse05
30 January 2016, 07:30
My God man! What have you done? 😖 😫

That sucks man. I don't usually take too much care in assembling as I know I'm going to mark the gun up with use anyway. But I'll be taking my time and being careful with this one.

Sent from my SM-N910V using TapatalkI was trying to be extra careful.... didn't work out. But I think it will be ok after my cover up work.

Battle Cock
30 January 2016, 08:10
Those pictures hurt man... Ouch. What's your cover up plan?

titanse05
30 January 2016, 08:38
Those pictures hurt man... Ouch. What's your cover up plan?How about this?

http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160130_105506_zpsyqfzuery_edit_1454171984001_zps jw3hld7q.jpg

Wouldn't even know it's there if I didn't tell ya. Thank God!

I probably wouldn't have posted any pictures if I couldn't have fixed it this well. I would have been too embarrassed. ;)

Battle Cock
30 January 2016, 08:53
How about this?

http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160130_105506_zpsyqfzuery_edit_1454171984001_zps jw3hld7q.jpg

Wouldn't even know it's there if I didn't tell ya. Thank God!

I probably wouldn't have posted any pictures if I couldn't have fixed it this well. I would have been too embarrassed. ;)

I'd swear that was a before picture.

What did you use? I can't see any blemish.

Pyzik
30 January 2016, 08:58
Great job on the touch up

Sent from my SM-N910V using Tapatalk

titanse05
30 January 2016, 09:03
I'd swear that was a before picture.

What did you use? I can't see any blemish.That's a trade secret... LMFAO.

Seriously though, it is testors flat black enamel paint. I taped off that top section and applied the paint by dabbing with a qtip. It is still curing but it is a perfect match. *breathes sigh of relief*

I had used it to touch up small areas before and it well worth $1.50.

Battle Cock
30 January 2016, 11:18
That's a trade secret... LMFAO.

Seriously though, it is testors flat black enamel paint. I taped off that top section and applied the paint by dabbing with a qtip. It is still curing but it is a perfect match. *breathes sigh of relief*

I had used it to touch up small areas before and it well worth $1.50.

Nice. And since it's not an area that sees hard use, it should last awhile.

Josh S.
30 January 2016, 12:09
Good grief, I should've heeded your warning lol. Seriously though that really sucks but you did a great job on the touch up! Hopefully it holds up overtime.

I was planning on doing my first bolt catch install on this build but not anymore!

Battle Cock
30 January 2016, 12:30
Good grief, I should've heeded your warning lol. Seriously though that really sucks but you did a great job on the touch up! Hopefully it holds up overtime.

I was planning on doing my first bolt catch install on this build but not anymore!

Tape is your friend when installing bolt catches. I marred my first lower minorly on the bolt catch install, but all the rest have gone smoothly. (I've built 8-10 lowers)

Deadwing
30 January 2016, 15:51
Tape is your friend when installing bolt catches. I marred my first lower minorly on the bolt catch install, but all the rest have gone smoothly. (I've built 8-10 lowers)

Tape and the proper tools. A roll pin starter punch is super helpful, and roll pin punches are a must. I also use a slave pin i made from a nail to hold everything together while i drive the roll pin into place.

titanse05
30 January 2016, 16:05
Tape and the proper tools. A roll pin starter punch is super helpful, and roll pin punches are a must. I also use a slave pin i made from a nail to hold everything together while i drive the roll pin into place.and sometimes all that isn't enough.... Lol

BoilerUp
30 January 2016, 18:35
Titan, if it makes you feel any better, I just over-torqued and sheered a cross bolt while installing a KMR handguard today. Now I know why BCM sells all the mounting hardware separately even though the handguard comes with everything you need.

Pyzik
30 January 2016, 18:37
Jeez, you guys.....

Sent from my SM-N910V using Tapatalk

UWone77
30 January 2016, 19:38
Well my build most definitely started off on the wrong foot last night. I started with the lower and with the hardest part of the LPK installation, the bolt catch. I've installed at least half a dozen of these bastards without issue but this time was different.

I started the roll pin with a starter punch and it seemed to be a bit stubborn but it was going fine..... until I switched to a roll pin punch to drive it the rest of the way. The roll pin started mushrooming shortly before being all the way "home". So I decided to remove it and try it again with a new pin. That is when the real fun started. The pin would not drive back out, ended up snapping the punch off and it jammed up causing the whole thing to be locked up. After trying just about everything to free the broken pin and punch I ended up having to cut the damn bolt catch out.

Anyway, even after I taped the crap out of the lower I still boogered up the lower around the roll pin ears and the bump out forward of the bolt catch which was caused by the punch breaking while trying to drive the pin out. I think I can hide it for the most part but I am not happy with myself. This set is just too purty to damage during assembly.

Obsenities were most certainly flying.

Well I did get the rest of the rifle assembled and will just have to order a new bolt catch to complete the build. Probably going with an Forward Controls ABC/R Forged. I was surprised how easy the bolt catch paddle broke off with moderate pressure so I won't be using mil-spec versions anymore.

Now for a couple pictures.

WARNING: PICTURES ARE NOT FOR THE WEAK HEARTED.

Almost completed photos will follow once the paint dries :)


http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160129_224810_zpsvln33syo.jpg

http://i230.photobucket.com/albums/ee318/titanse05/Mobile%20Uploads/20160129_224830_zpsdrsziyx5.jpg

Make sure you get the Brownells tool for removing the bolt catch roll pin. Mushrooming the pin is bound to happen!

417

Deadwing
30 January 2016, 21:21
That Brownells punch is money well spent.

Deadwing
30 January 2016, 21:24
Titan, if it makes you feel any better, I just over-torqued and sheered a cross bolt while installing a KMR handguard today. Now I know why BCM sells all the mounting hardware separately even though the handguard comes with everything you need.

That sucks! I tend to be a bit ham-handed and over-torque things, so i invested in a torque driver to help prevent tragedies like stripped threads and sheared cross bolts.

Pyzik
31 January 2016, 19:30
Well I was able to order the remaining small lower parts I needed, including a buffer kit.

Waiting on something to possibly come through for a barrel. Then still need BCG, stock and muzzle device.

Oh, and another BADASS.


Sent from my SM-N910V using Tapatalk

EO3
31 January 2016, 23:46
Well I was able to order the remaining small lower parts I needed, including a buffer kit.

Waiting on something to possibly come through for a barrel. Then still need BCG, stock and muzzle device.

What barrel and BCG are you thinking?

Pyzik
1 February 2016, 05:12
What barrel and BCG are you thinking?

Haven't decided. Most likely something enhanced.
Trying to decide on a charging handle right now too. While I like the looks of a few I still find myself liking my BCM Mod 3 overall.

Josh S.
1 February 2016, 05:26
Haven't decided. Most likely something enhanced.
Trying to decide on a charging handle right now too. While I like the looks of a few I still find myself liking my BCM Mod 3 overall.

Come on, just go balls out and get an EraThr3 Freedom Bone! ;)

Pyzik
1 February 2016, 06:02
Come on, just go balls out and get an EraThr3 Freedom Bone! ;)
Pff. I am not that spendy.
I have a Raptor anyway and I find myself wishing the left side latch was just a little bigger.

Sent from my SM-N910V using Tapatalk

EO3
1 February 2016, 07:00
Pff. I am not that spendy.
I have a Raptor anyway and I find myself wishing the left side latch was just a little bigger.

Don't know how long you're willing to stretch your build out, but the Geissele Ambi CH looks really nice. Can't go wrong with BCM though.

Pyzik
1 February 2016, 07:11
Don't know how long you're willing to stretch your build out, but the Geissele Ambi CH looks really nice. Can't go wrong with BCM though.

It's already going to be stretched out a little. Going to be waiting on a possible barrel deal anyway.
I was looking at it. Looks like a modified raptor.

Aragorn
1 February 2016, 09:51
Come on, just go balls out and get an EraThr3 Freedom Bone! ;)

Freedom bone? Had to look that up. I totally understand that good quality = money but I about choked when I saw a $300 Ti charging handle.

UWone77
1 February 2016, 09:56
Pff. I am not that spendy.
I have a Raptor anyway and I find myself wishing the left side latch was just a little bigger.

Sent from my SM-N910V using Tapatalk

Just get the Umbrella version where they are the same length.

Pyzik
1 February 2016, 10:06
Just get the Umbrella version where they are the same length.

I didn't know that! Headed to check it out!

Joelski
1 February 2016, 10:15
Would be funny if it wasn't true. I think we found the patent definition of Gucci Gear". As in it does nothing better and costs way, way more.

The so-called "style" is all in how the CH is used, IMO. Nobody can work a CH more fabulously than that Phuc Long dood.

UWone77
1 February 2016, 10:28
Honestly, in EraThr3 and Sheri's defense on the Freedom Bone, the CH was a limited run for promotional purposes. They knew it wasn't going to be a big seller or something they kept stocking. It was to show off some machining by the AXTS guys, who tell me the Freedom Bone takes 10x more machine time since they're using grade 5 Titanium, not that cheap Grade 2 stuff. At $299, they aren't making a lot of money on it, but as I said, it's a promotional thing. Definitely not for everyone.

Pyzik
1 February 2016, 10:34
Honestly, in EraThr3 and Sheri's defense on the Freedom Bone, the CH was a limited run for promotional purposes. They knew it wasn't going to be a big seller or something they kept stocking. It was to show off some machining by the AXTS guys, who tell me the Freedom Bone takes 10x more machine time since they're using grade 5 Titanium, not that cheap Grade 2 stuff. At $299, they aren't making a lot of money on it, but as I said, it's a promotional thing. Definitely not for everyone.
Of course. I assumed everyone understood that's what it was.

Sent from my SM-N910V using Tapatalk

fledge
1 February 2016, 11:03
EraThr3 is a lifestyle company more than a firearms company. If they could make some quality products that they engineer themselves, like inventing an actual better charging handle or scope mount or whatever, they'd be taken more seriously. As it is, they still need to prove themselves beyond being a high dollar marketing corp.

UWone77
1 February 2016, 11:05
EraThr3 is a lifestyle company more than a firearms company. If they could make some quality products that they engineer themselves, like inventing an actual better charging handle or scope mount or whatever, they'd be taken more seriously. As it is, they still need to prove themselves beyond being a high dollar marketing corp.

That's the point, they aren't taking themselves seriously. They are well aware that they are a lifestyle, and that lifestyle doesn't fit most people. You nailed it on the first line. They brand themselves as a lifestyle company more than a firearms company. They also insist everything they sell, including the promo items and clothing are made in the USA, which also adds to the prices.

Aragorn
1 February 2016, 11:12
Honestly, in EraThr3 and Sheri's defense on the Freedom Bone, the CH was a limited run for promotional purposes. They knew it wasn't going to be a big seller or something they kept stocking. It was to show off some machining by the AXTS guys, who tell me the Freedom Bone takes 10x more machine time since they're using grade 5 Titanium, not that cheap Grade 2 stuff. At $299, they aren't making a lot of money on it, but as I said, it's a promotional thing. Definitely not for everyone.

Not knocking. If they're not sold out already I'm sure they will be soon. As a former machinist I know all about machining Ti, and while not my LEAST favorite thing to machine, it wasn't too far off from it.

Mostly I was just like OMG $300 CH!

Stone
1 February 2016, 11:49
Just get the Umbrella version where they are the same length.

Speaking of UC I clicked on every one of their products and it is Out Of Stock. How does a company make money when they don't stock products.[bash]

Aragorn
1 February 2016, 11:52
Speaking of UC I clicked on every one of their products and it is Out Of Stock. How does a company make money when they don't stock products.[bash]

If you're looking for an Umbrella Raptor CH, AXTS still has some.

https://www.axtsweapons.com/product/umbrella-corporation-raptor-charging-handle/

Pyzik
1 February 2016, 12:08
Queue angelic choir....

http://uploads.tapatalk-cdn.com/20160201/232235f6a6d86e936eb8016576278f13.jpg

Got the BEV block for $40 and transfer was freeeeeee.

Sent from my SM-N910V using Tapatalk

titanse05
1 February 2016, 13:06
Queue angelic choir....

http://uploads.tapatalk-cdn.com/20160201/232235f6a6d86e936eb8016576278f13.jpg

Got the BEV block for $40 and transfer was freeeeeee.

Sent from my SM-N910V using TapatalkNice. Looks like mine......pre-molestation.

I could post up my 98% complete pictures......need my bolt catch to ship from RA.

Pyzik
1 February 2016, 13:07
Nice. Looks like mine......pre-molestation.

I could post up my 98% complete pictures......need my bolt catch to ship from RA.
I'm waiting, looking out the window right now for the mail man. :D

Sent from my SM-N910V using Tapatalk

fledge
1 February 2016, 13:13
Thanks, UW, for the reply.

Just picked up the UC AXTS charging handle for my SMOS build too.

UWone77
1 February 2016, 13:50
LOL at least it looks like I sold AXTS/UCWRG 2 CHs today.

Josh S.
1 February 2016, 16:29
Got the BEV block for $40 and transfer was freeeeeee.

Rub it in...

:mad:

Pyzik
1 February 2016, 18:42
This is my SMOS set, there are many like it but this one is mine.

https://farm2.staticflickr.com/1550/24737635786_cf4ff8005e_b.jpg (https://flic.kr/p/DFYRgQ)
SMOS Set (https://flic.kr/p/DFYRgQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Dstrbdmedic167
1 February 2016, 18:52
Nice shot Dave!

Deadwing
1 February 2016, 19:15
Looks like it won't be necessary for me to post any photos of my set. i can't do it justice like that. Another killer shot, Pyzik.

Pyzik
1 February 2016, 19:18
Thanks James!


Looks like it won't be necessary for me to post any photos of my set. i can't do it justice like that. Another killer shot, Pyzik.
Lol. You still gotta post pics. You're probably a better shooter than me if that makes you feel better. Haha.

I got into taking pics of guns to help offset not being able to shoot as much with the baby here.

Sent from my SM-N910V using Tapatalk

Pyzik
1 February 2016, 19:22
Thanks to Down Range I now have decided that I need a TiN BCG for this.

Sent from my SM-N910V using Tapatalk

Battle Cock
1 February 2016, 19:32
This is my SMOS set, there are many like it but this one is mine.

https://farm2.staticflickr.com/1550/24737635786_cf4ff8005e_b.jpg (https://flic.kr/p/DFYRgQ)
SMOS Set (https://flic.kr/p/DFYRgQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

The lighting in this shot is excellent! It perfectly highlights the way the hand guard mates to the receiver.

DutyUse
1 February 2016, 20:31
This is my SMOS set, there are many like it but this one is mine.

https://farm2.staticflickr.com/1550/24737635786_cf4ff8005e_b.jpg (https://flic.kr/p/DFYRgQ)
SMOS Set (https://flic.kr/p/DFYRgQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Looks killer, congrats on a beauty

Pyzik
2 February 2016, 05:52
Thanks guys. Looks like some small stuff coming today and the rest Thursday. Woot.

Sent from my SM-N910V using Tapatalk

titanse05
2 February 2016, 05:59
Make sure you get the Brownells tool for removing the bolt catch roll pin. Mushrooming the pin is bound to happen!

417I was going to pick one of these today but I'll have to wait till they have a free shipping weekend or coupon code. $7.95 shipping on a $18 punch and 5 gas tube roll pins is just retarded. I don't have any immediate need so I can wait.

However, I bought one of these to make installation of the bolt catch roll pin 100% painless.

429

http://www.amazon.com/gp/product/B000X4J2EI?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00


I already have a bunch of other house related uses for this thing too. It arrives tomorrow via Amazon warehouse (under $40 shipped). Now if Rainier Arms slow ass shipping would just get my ABC/R shipped out I could install the last piece on my SMOS build.

Deadwing
2 February 2016, 07:43
How will giant pliers make it 100% painless to install a tiny roll pin?

Deadwing
2 February 2016, 07:56
Lol. You still gotta post pics. You're probably a better shooter than me if that makes you feel better. Haha.

I got into taking pics of guns to help offset not being able to shoot as much with the baby here.

Sent from my SM-N910V using Tapatalk

I might post one or two photos. [BD] But seriously, you've got mad photography skills. Always a pleasure viewing your work.

Pyzik
2 February 2016, 08:43
I might post one or two photos. [BD] But seriously, you've got mad photography skills. Always a pleasure viewing your work.
Thanks man. Means a lot

Sent from my SM-N910V using Tapatalk

UWone77
2 February 2016, 08:52
How will giant pliers make it 100% painless to install a tiny roll pin?

Exactly. Anytime I've seen someone install Roll Pins with pilers, they have some jacked up lowers.

titanse05
2 February 2016, 10:10
How will giant pliers make it 100% painless to install a tiny roll pin?
https://www.youtube.com/watch?v=q11mziNfzmc

Start pin with starter punch, squeeze, send rest of way home with a couple taps. Seems easier to me. With no chance of mushrooming the pin.


Exactly. Anytime I've seen someone install Roll Pins with pliers, they have some jacked up lowers.I know what you mean, but those people were using regular pliers with the teeth. I have a bunch of those and would never think of using them to install a pin. The plier wrench I posted has smooth jaws and the action of the pliers is straight not at an angle like regular pliers.

fledge
2 February 2016, 12:20
I love my knipex. They are more a wrench than pliers but I think the readjusting with each notch and a little squeeze just may be the ticket. Gonna try this.

gatordev
2 February 2016, 13:15
I know what you mean, but those people were using regular pliers with the teeth. I have a bunch of those and would never think of using them to install a pin. The plier wrench I posted has smooth jaws and the action of the pliers is straight not at an angle like regular pliers.

Taping the jaws, also helps. I use the same technique with a set of vise grips. If I get lazy and don't re-tape the jaws, I might make a small scratch, but given the use of the lower down road and the wear it will receive, I quickly get over it. But with good technique and patience, you can do it with no mars or marks just fine.

UWone77
2 February 2016, 13:25
https://www.youtube.com/watch?v=q11mziNfzmc

Start pin with starter punch, squeeze, send rest of way home with a couple taps. Seems easier to me. With no chance of mushrooming the pin.

I know what you mean, but those people were using regular pliers with the teeth. I have a bunch of those and would never think of using them to install a pin. The plier wrench I posted has smooth jaws and the action of the pliers is straight not at an angle like regular pliers.

I'm sure you're one of the people that are good with his hands and mechanically inclined. I just don't like to see people try to use pliers as not everyone is careful. Plus, a Roll Pin starter and punch are cheaper tools. I have seen some dicked up lowers and uppers over the years.

DeviantLogic
2 February 2016, 14:16
Taping the jaws, also helps. I use the same technique with a set of vise grips. If I get lazy and don't re-tape the jaws, I might make a small scratch, but given the use of the lower down road and the wear it will receive, I quickly get over it. But with good technique and patience, you can do it with no mars or marks just fine.

Could also get some Sugru and make some silicone covers for the jaws. More durable than tape and won't scratch anything.

gatordev
2 February 2016, 14:35
Could also get some Sugru and make some silicone covers for the jaws. More durable than tape and won't scratch anything.

I hadn't seen that before. That's a great idea. Sometimes I think I'm more dangerous with a punch and hammer than a set of pliers.

EO3
2 February 2016, 14:41
So after reading all this roll pin discussion... I'm a bit worried myself now! Is the Brownells punch a good tool for the job? Basically, what's the most budget friendly way to PROPERLY do this? Like... Maybe $25 or less?

titanse05
2 February 2016, 14:56
So after reading all this roll pin discussion... I'm a bit worried myself now! Is the Brownells punch a good tool for the job? Basically, what's the most budget friendly way to PROPERLY do this? Like... Maybe $25 or less?The Brownells punch is for removal of the pin. A good starter punch, roll pin punch, a bunch of protective tape and a hammer work well most of the time. :)

Pyzik
2 February 2016, 14:57
I've never had an issue with pins.

Sent from my SM-N910V using Tapatalk

titanse05
2 February 2016, 15:29
I've never had an issue with pins.

Sent from my SM-N910V using TapatalkMe neither.... until last Friday. Lol

I think it will make it easier and be quicker. I will report back once my bolt catch arrives.

titanse05
2 February 2016, 16:32
Enough blabbing, here is a quick picture of mine.

http://i230.photobucket.com/albums/ee318/titanse05/Gun%20stuff/20160202_17140501_zpstlebj0q5.jpg

Pyzik
2 February 2016, 18:24
Enough blabbing, here is a quick picture of mine.

http://i230.photobucket.com/albums/ee318/titanse05/Gun%20stuff/20160202_17140501_zpstlebj0q5.jpg
😍😍 I like the gray!

Progress

http://uploads.tapatalk-cdn.com/20160203/09b4bde3fbb3673227ba90bde4df7434.jpg

Sent from my SM-N910V using Tapatalk

Josh S.
2 February 2016, 18:53
���� I like the gray!

Progress

http://uploads.tapatalk-cdn.com/20160203/09b4bde3fbb3673227ba90bde4df7434.jpg

Sent from my SM-N910V using Tapatalk

Okay that CMC looks badass paired with the SMOS set! Just when I think I have my mind made up on a Geissele... lol

Also what dust cover is that?! I think this build is deserving of something other than mil-spec.

Dstrbdmedic167
2 February 2016, 19:08
Also what dust cover is that?! I think this build is deserving of something other than mil-spec.

Strike Industries UDC.

Pyzik
2 February 2016, 19:24
Strike Industries UDC.
Bingo. Their plain one. I wanted a V7 port door but just couldn't justify almost $50.
Also digging the SI pins. Not sure how I feel about their mag release bar. Finish isn't near as nice as the pins.

Thanks.
I knew the CMC would look good in it.

Sent from my SM-N910V using Tapatalk

Josh S.
2 February 2016, 19:35
Did you get the regular or "Enhanced" UDC? Says on their website you have to use the Enhanced for some billet uppers.

That SI pin flows with the lines so well I didn't even realize you had it installed lol. Looks good.

EO3
2 February 2016, 19:40
😍😍
Progress

http://uploads.tapatalk-cdn.com/20160203/09b4bde3fbb3673227ba90bde4df7434.jpg

Looking good!!! Are those the stock trigger pins for the CMC?

What safety selector are you going with?

Pyzik
2 February 2016, 19:41
Did you get the regular or "Enhanced" UDC? Says on their website you have to use the Enhanced for some billet uppers.

That SI pin flows with the lines so well I didn't even realize you had it installed lol. Looks good.
It's the enhanced.
It is slightly harder to close than a milspec.

Sent from my SM-N910V using Tapatalk

Deadwing
2 February 2016, 19:43
Bingo. Their plain one. I wanted a V7 port door but just couldn't justify almost $50.
Also digging the SI pins. Not sure how I feel about their mag release bar. Finish isn't near as nice as the pins.

Thanks.
I knew the CMC would look good in it.

Sent from my SM-N910V using Tapatalk

I bought an SI mag catch for my GFY build. Finish on mine is about on par with milspec. But hey, it's stylized. I went with a milspec dust cover on mine. My lower is finished as of last night. I went with an ALG ACT that i had sitting around for the trigger, Forward Controls ABC/R, BAD pins and safety, with a MOE K2 and CTR in grey for furniture.

I'm waiting on my goofy sized crowfoot wrench to arrive to finish the upper, which is getting a Centurion Arms 16" CHF barrel and BCG, BCM Mod 4 CH, Magpul MBUS Pro BUIS, and a BattleComp 1.0. Optic TBD.

DutyUse
2 February 2016, 19:47
I bought an SI mag catch for my GFY build. Finish on mine is about on par with milspec. But hey, it's stylized. I went with a milspec dust cover on mine. My lower is finished as of last night. I went with an ALG ACT that i had sitting around for the trigger, Forward Controls ABC/R, BAD pins and safety, with a MOE K2 and CTR in grey for furniture.

I'm waiting on my goofy sized crowfoot wrench to arrive to finish the upper, which is getting a Centurion Arms 16" CHF barrel and BCG, BCM Mod 4 CH, Magpul MBUS Pro BUIS, and a BattleComp 1.0. Optic TBD.

That should turn out wicked

Pyzik
2 February 2016, 20:04
That should turn out wicked
Agreed!

Sent from my SM-N910V using Tapatalk

EO3
3 February 2016, 15:53
Just throwing this out here to see if anyone is interested:

I have a 14.5" Faxon Gunner barrel that I am wanting to part ways with. Muzzle brake was NOT pinned because it is SBR'd. It has hardly been used at all. Didn't count carefully, but probably between 100-150 rounds through. I'd sell it with the Faxon gas block and tube as well. Just seeing if anyone might be interested! I currently have it on a build with the SMOS SM13 rail, and it fits very nicely with it. Comes out just past the rail without a muzzle device.

Dstrbdmedic167
3 February 2016, 15:55
Just throwing this out here to see if anyone is interested:

I have a 14.5" Faxon Gunner barrel that I am wanting to part ways with. Muzzle brake was NOT pinned because it is SBR'd. It has hardly been used at all. Didn't count carefully, but probably between 100-150 rounds through. I'd sell it with the Faxon gas block and tube as well. Just seeing if anyone might be interested! I currently have it on a build with the SMOS SM13 rail, and it fits very nicely with it. Comes out just past the rail without a muzzle device.

Post it in the classifieds. It'll sell...

Battle Cock
3 February 2016, 16:12
Enough blabbing, here is a quick picture of mine.

http://i230.photobucket.com/albums/ee318/titanse05/Gun%20stuff/20160202_17140501_zpstlebj0q5.jpg

Straight sexy.

EO3
3 February 2016, 16:27
Post it in the classifieds. It'll sell...

Thank you! As you can see... I'm pretty new here. I didn't know that a classified thread existed. Thank you very much!

Battle Cock
3 February 2016, 16:41
Thank you! As you can see... I'm pretty new here. I didn't know that a classified thread existed. Thank you very much!

There's a whole classified section! Just create your own thread for the item. And welcome to the forum!

Josh S.
3 February 2016, 16:50
Just throwing this out here to see if anyone is interested:

I have a 14.5" Faxon Gunner barrel that I am wanting to part ways with. Muzzle brake was NOT pinned because it is SBR'd. It has hardly been used at all. Didn't count carefully, but probably between 100-150 rounds through. I'd sell it with the Faxon gas block and tube as well. Just seeing if anyone might be interested! I currently have it on a build with the SMOS SM13 rail, and it fits very nicely with it. Comes out just past the rail without a muzzle device.

Do you have any pictures of that setup? I'm thinking about getting a 14.5" for this build and I'm curious what it'd look like.

And do you know if there is there enough room with the 14.5 for a silencer outside the rail?

EO3
3 February 2016, 17:04
Do you have any pictures of that setup? I'm thinking about getting a 14.5" for this build and I'm curious what it'd look like.

And do you know if there is there enough room with the 14.5 for a silencer outside the rail?

I want to say a suppressor would fit outside, but I have no guarantees.

Here are a couple pretty poor pictures from my phone that I have off hand. May be able to get some close ups of the muzzle later.

438

439

Josh S.
3 February 2016, 17:31
I want to say a suppressor would fit outside, but I have no guarantees.

Here are a couple pretty poor pictures from my phone that I have off hand. May be able to get some close ups of the muzzle later.

438

439

Thanks for the pics, that's exactly what I'm looking for. Hopefully a silencer will work with it.

fledge
3 February 2016, 17:34
That rail is also .15 inches longer than the one you got, Josh. Not a lot of difference but from this pics, it should have plenty of space between the rail and the shoulder of the barrel.

UWone77
3 February 2016, 18:03
Nice Gen III POF Lower. I remember back when they were the cat's meow. Still have one floating around somewhere.

Deadwing
3 February 2016, 18:09
That should turn out wicked


Agreed!

I hope so.

EO3
3 February 2016, 18:10
Nice Gen III POF Lower. I remember back when they were the cat's meow. Still have one floating around somewhere.

Thanks! Bought it awhile back as a complete lower for $400 new on sale.

EO3
4 February 2016, 16:15
Just in case you guys didn't see this in the other thread:

443

Pyzik
5 February 2016, 06:28
Woo hoo. Grabbed a BCM Mod 3 locally for $35, brand new. And Parallax TiN BCG is on the way. :)

Farva
5 February 2016, 13:37
Woo hoo. Grabbed a BCM Mod 3 locally for $35, brand new. And Parallax TiN BCG is on the way. :)

That's a steal!

Deadwing
5 February 2016, 16:37
Woo hoo. Grabbed a BCM Mod 3 locally for $35, brand new. And Parallax TiN BCG is on the way. :)

Damn, that's an awesome deal. I'm using my last spare Mod 4 on this build. I need to stock up.

Dstrbdmedic167
5 February 2016, 18:05
Woo hoo. Grabbed a BCM Mod 3 locally for $35, brand new. And Parallax TiN BCG is on the way. :)

I think you need an avalanche on the smos build [BD]

Pyzik
5 February 2016, 18:36
I think you need an avalanche on the smos build [BD]
It MAY just find one.

Sent from my SM-N910V using Tapatalk

titanse05
5 February 2016, 20:21
I was going to pick one of these today but I'll have to wait till they have a free shipping weekend or coupon code. $7.95 shipping on a $18 punch and 5 gas tube roll pins is just retarded. I don't have any immediate need so I can wait.

However, I bought one of these to make installation of the bolt catch roll pin 100% painless.

429

http://www.amazon.com/gp/product/B000X4J2EI?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00


I already have a bunch of other house related uses for this thing too. It arrives tomorrow via Amazon warehouse (under $40 shipped). Now if Rainier Arms slow ass shipping would just get my ABC/R shipped out I could install the last piece on my SMOS build.My bolt catch arrived today and I got it installed. I have to say that using the Klipex Pliers Wrench made installation a breeze. :beer:

Deadwing
6 February 2016, 02:38
I think you need an avalanche on the smos build [BD]

I thought about an Avalanche for my SMOS build, but my preferred vendor is sold out of the color and handle option i want.

Pyzik
6 February 2016, 13:07
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Battle Cock
6 February 2016, 16:25
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Looking good man. The SMOS parts are an excellent base, but you have made great parts selection on top of that.

Deadwing
6 February 2016, 20:03
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Nice! The pivot pin really goes well with the lines of the receiver. I'm questioning my choice of grey furniture. I might switch it to black. I'm indecisive.

Dave Timm
6 February 2016, 21:02
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

I don't usually post on build pics but man you nailed it with your choice of parts. I hope you are ok with some guys copying this because I feel you have set the bar!

Pyzik
6 February 2016, 21:14
I don't usually post on build pics but man you nailed it with your choice of parts. I hope you are ok with some guys copying this because I feel you have set the bar!
Haha, thanks for the compliments!
This is my first build I put thought into making look good beyond just good enough.

Sent from my SM-N910V using Tapatalk

Josh S.
6 February 2016, 21:26
I just noticed the Torx heads on the screws. Are those aftermarket or did they come with the CMC? That may give CMC some points in my book if they come with the trigger...

Btw, that rifle is coming along great! Almost makes me want to ditch the polished lower parts and go all black.

alamo5000
6 February 2016, 21:31
I just noticed the Torx heads on the screws. Are those aftermarket or did they come with the CMC? That may give CMC some points in my book if they come with the trigger...

Those are standard with all CMC triggers, at least the ones I have purchased.

UWone77
6 February 2016, 23:33
Nice! The pivot pin really goes well with the lines of the receiver. I'm questioning my choice of grey furniture. I might switch it to black. I'm indecisive.

I don't think Grey Furniture works with Black sets IMHO. Titanium, Tungsten cerakote goes a lot better with Grey.

Farva
6 February 2016, 23:59
I don't think Grey Furniture works with Black sets IMHO. Titanium, Tungsten cerakote goes a lot better with Grey.

http://uploads.tapatalk-cdn.com/20160207/d6f530b7f5a50c2e5a9a0dcd702fb76c.jpg

Tungsten for the win. But it doesn't have grey furniture.

Deadwing
7 February 2016, 00:06
I don't think Grey Furniture works with Black sets IMHO. Titanium, Tungsten cerakote goes a lot better with Grey.

I tried to convince myself otherwise, but i think i agree with you on that. I bought the grey furniture i used on my SMOS lower for another black lower, and i really didn't like it on that set either. It's tough to beat black on black. I've got a NiB Mega billet set in the safe. Maybe i'll save the grey furniture and try it out on that.

Deadwing
7 February 2016, 00:08
http://uploads.tapatalk-cdn.com/20160207/d6f530b7f5a50c2e5a9a0dcd702fb76c.jpg

Tungsten for the win. But it doesn't have grey furniture.

I've always liked that rifle. Good looking build.

Farva
7 February 2016, 00:10
I've always liked that rifle. Good looking build.

Thanks! I am awful proud of it! Got an 11.5" build about to kit off too I think you'll like.

Deadwing
7 February 2016, 00:26
Thanks! I am awful proud of it! Got an 11.5" build about to kit off too I think you'll like.

Nice! I look forward to seeing it!

titanse05
7 February 2016, 05:42
Nice! The pivot pin really goes well with the lines of the receiver. I'm questioning my choice of grey furniture. I might switch it to black. I'm indecisive.I wanted to try something different so I went with grey furniture. I'm glad I did. I already have enough all black rifles and wanted to try something different for the SMOS set.

Dstrbdmedic167
7 February 2016, 05:44
You could always cerakote the furniture instead of the receivers and rail to get the grey/contrast you might be looking.

Pyzik
7 February 2016, 06:23
http://uploads.tapatalk-cdn.com/20160207/d6f530b7f5a50c2e5a9a0dcd702fb76c.jpg

Tungsten for the win. But it doesn't have grey furniture.
She's a beauty

Sent from my SM-N910V using Tapatalk

Farva
7 February 2016, 06:43
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Speaking of beauty, bro you're knocking it out of the park with your images! Beautiful stuff!

Deadwing
7 February 2016, 09:50
You could always cerakote the furniture instead of the receivers and rail to get the grey/contrast you might be looking.

I've thought about a Cerakote job on the furniture, but since I don't have the skills to do it myself it would be cost prohibitive. If I was looking at their web page correctly, Rainier Arms want $85(!!!!!) a piece for Cerakote! I'm sure there are less expensive options out there, but I'm not sure where they are. One thing I am sure of though, is that after staring at it for the past 3 or 4 days, that shade of grey just isn't my cup of tea with the black receivers.

mustangfreek
7 February 2016, 17:17
https://farm2.staticflickr.com/1622/24832734796_256015eaf2_b.jpg (https://flic.kr/p/DQofTW)
Getting There (https://flic.kr/p/DQofTW) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Damn...killer shot and damn good looking setup there...

I'm jelly...lol..


I've thought about a Cerakote job on the furniture, but since I don't have the skills to do it myself it would be cost prohibitive. If I was looking at their web page correctly, Rainier Arms want $85(!!!!!) a piece for Cerakote! I'm sure there are less expensive options out there, but I'm not sure where they are. One thing I am sure of though, is that after staring at it for the past 3 or 4 days, that shade of grey just isn't my cup of tea with the black receivers.

Ya I'm up in there also on grey, have parts to build up something but bought the mft grey grip and stock for something different and to try the grip..as I would of just went black but got gifted a silver BC ..so...lol

Pyzik
7 February 2016, 17:50
Thanks for the compliments. I may have an Avalanche to replace the BCM charging handle.

It's gonna be hard waiting to finish it. :(

Sent from my SM-N910V using Tapatalk

Battle Cock
7 February 2016, 18:25
Thanks for the compliments. I may have an Avalanche to replace the BCM charging handle.

It's gonna be hard waiting to finish it. :(

Sent from my SM-N910V using Tapatalk

What parts are you lacking?

Pyzik
7 February 2016, 18:38
What parts are you lacking?
BCM Sopmod stock (not out yet), barrel, muzzle device and sight system (sights, red dot, ect).

Sent from my SM-N910V using Tapatalk

Deadwing
8 February 2016, 17:52
I reconfigured my lower today and feel much better about it. I replaced the grey Magpul furniture with black furniture: A Magpul MOE K2 and a B5 SOPMOD Bravo stock. I really dig it.

I also replaced the ALG ACT with a QMS because, quite frankly, the ACT felt like shit. The ACT was creepy, heavy, and not at all what i would've expected considering how nice the QMS triggers i've used have been. So, do i contact ALG, or Geissele (since they actually make the triggers for ALG)?

Now to get off my lazy ass and finish the upper. I've got an optic ready for it: an Aimpoint ACO in a QRP mount that i sourced from a PRO that got a Bobro mount.