DutchTerror
10 January 2016, 06:54
Winter has set in, and boredom along with it. I had quite a few parts on hand, so the inevitable ordering of parts began. I know this probably sounds (and looks) crazy, but I just have to try it. I also wanted to mess around with spray painting. I've done Duracoat, but this time I'm slumming it with Krylon. The goal? A pistol with glass for reaching out more than the average pistol. I've done a few Appleseeds, and my goal is to be able to reach out up to 500yards on IPSC steel with only a sling. Here's the parts list:
PSA Forged Lower Receiver
CMMG? LPK
Magpul MOE Grip
Magpul Trigger Guard
Geissele G2S Trigger Group
Carbine Buffer and Spring
KAK Extended Pistol Tube
Exile Machine Foam Cover
BCM Blem Upper Receiver
BCM Upper Parts Group
Aero Precision CMV Nitride 10.5" Barrel
KAK Slimline Flash Can
AIM Surplus Evolution 3.0 NiB BCG
BCM Gunfighter Mod 4 Charging Handle
Hera Arms IRS Keymod 12" Handguard
Joe Bob Nitride Low Profile Gas Block
Joe Bob Stainless Carbine Gas Tube
AR-Stoner 30mm Scope Mount
Bushnell FFP 1-4x PCL Scope
I'm still waiting on the barrel and glass to show up. I'll need a sling mount for the front yet as well for shooting in prone with a USGI sling.
First mock assembly after paint. This is Krylon Khaki by the way. I painted this while the temps was about 25° by preheating the parts with a blow dryer in high, spraying, then flashing each coat with the blow dryer again.
http://i66.tinypic.com/2u7ofna.jpg
And here's how it's sitting now. Aero makes some good stuff for a good price, but they are currently dragging their feet on shipping out the barrel.
http://i64.tinypic.com/wlyww4.jpg
http://i65.tinypic.com/2uzqxvs.jpg
PSA Forged Lower Receiver
CMMG? LPK
Magpul MOE Grip
Magpul Trigger Guard
Geissele G2S Trigger Group
Carbine Buffer and Spring
KAK Extended Pistol Tube
Exile Machine Foam Cover
BCM Blem Upper Receiver
BCM Upper Parts Group
Aero Precision CMV Nitride 10.5" Barrel
KAK Slimline Flash Can
AIM Surplus Evolution 3.0 NiB BCG
BCM Gunfighter Mod 4 Charging Handle
Hera Arms IRS Keymod 12" Handguard
Joe Bob Nitride Low Profile Gas Block
Joe Bob Stainless Carbine Gas Tube
AR-Stoner 30mm Scope Mount
Bushnell FFP 1-4x PCL Scope
I'm still waiting on the barrel and glass to show up. I'll need a sling mount for the front yet as well for shooting in prone with a USGI sling.
First mock assembly after paint. This is Krylon Khaki by the way. I painted this while the temps was about 25° by preheating the parts with a blow dryer in high, spraying, then flashing each coat with the blow dryer again.
http://i66.tinypic.com/2u7ofna.jpg
And here's how it's sitting now. Aero makes some good stuff for a good price, but they are currently dragging their feet on shipping out the barrel.
http://i64.tinypic.com/wlyww4.jpg
http://i65.tinypic.com/2uzqxvs.jpg