PDA

View Full Version : SMOS ARMS weapons and components (pic thread)



Pages : [1] 2

Stickman
29 February 2016, 23:17
Early Gen 3 up top, and SMOS lower on the bottom.


https://41.media.tumblr.com/352537fdb678736024c9c33a0a8df069/tumblr_o3cmd7e4nj1rrcg2fo1_1280.jpg

Brahmzy
1 March 2016, 05:47
Some 308 Mule Rail
http://i64.tinypic.com/akhoyd.jpg

velocity2006
1 March 2016, 16:42
http://i.imgur.com/Xf3NVvi.jpg

http://i.imgur.com/z9yC98o.jpg

DutyUse
1 March 2016, 17:45
Some 308 Mule Rail
http://i64.tinypic.com/akhoyd.jpg

Nice build

Dstrbdmedic167
3 March 2016, 17:58
This is off at my cerakoter.. Still not 100% on color.. any suggestions?

771

JSchell1309
3 March 2016, 19:23
This is off at my cerakoter.. Still not 100% on color.. any suggestions?


I think I'm holding out for Tungsten on mine, huge sucker for the dark grey with black features. If you want something different than all the grey and bronze ARs I think Blue Titanium looks really good.

http://static1.squarespace.com/static/55885e0ee4b0ceb955a6197c/t/5589bc6ce4b09ddbc3965496/1435090036837/

Dstrbdmedic167
3 March 2016, 19:26
I think I'm holding out for Tungsten on mine, huge sucker for the dark grey with black features. If you want something different than all the grey and bronze ARs I think Blue Titanium looks really good.


Yea I love grey too but want something different. I've had a pistol done in blue titanium and graphite black mix a long time ago. I'm leaning to a green this go around but green isn't normally my thing.



Sent from my iPhone using Tapatalk

EO3
3 March 2016, 19:33
This is off at my cerakoter.. Still not 100% on color.. any suggestions?

771

BAZOOKA GREEEEEEEN! I also really like the blue titanium. One of these days, I'd like to have an AR in Bazooka Green and one in Blue Titanium to add to my collection.

Dstrbdmedic167
3 March 2016, 19:35
BAZOOKA GREEEEEEEN! I also really like the blue titanium. One of these days, I'd like to have an AR in Bazooka Green and one in Blue Titanium to add to my collection.

That's the color I've been debating actually but is it too much when it's Noveske bazooka Green. This is the GFY set after all...


Sent from my iPhone using Tapatalk

JSchell1309
3 March 2016, 19:42
BAZOOKA GREEEEEEEN!

I'm with him, if you are thinking green that is a great looking color.

EO3
3 March 2016, 20:34
That's the color I've been debating actually but is it too much when it's Noveske bazooka Green. This is the GFY set after all...


Sent from my iPhone using Tapatalk

Could be... I'm a big fan of good ole' OD Green as well. Or you could always get some crazy Blowndeadline cerakote going...

Dstrbdmedic167
3 March 2016, 20:44
Could be... I'm a big fan of good ole' OD Green as well. Or you could always get some crazy Blowndeadline cerakote going...

I've been there one time already and i'm due for some more BDL awesomeness.. Ordered some Bazooka green... looks like it may be a winner...

EO3
3 March 2016, 21:00
I've been there one time already and i'm due for some more BDL awesomeness.. Ordered some Bazooka green... looks like it may be a winner...

I'll trade you my FDE GFY set for your Bazooka Green GFY set LOL [BD]

Dstrbdmedic167
3 March 2016, 21:13
I'll trade you my FDE GFY set for your Bazooka Green GFY set LOL [BD]

HAHA.. some assembly required as its not even koted yet...

mustangfreek
4 March 2016, 02:06
In for the results of this bazooka green color.

UWone77
10 March 2016, 23:24
805

UWone77
11 March 2016, 21:07
807

UWone77
12 March 2016, 19:38
818

Dstrbdmedic167
13 March 2016, 12:23
826

Josh S.
14 March 2016, 18:22
https://farm2.staticflickr.com/1441/25140637813_bf70d289ef_k.jpg (https://flic.kr/p/EiAkJD)Honey Badger MOE grip (https://flic.kr/p/EiAkJD) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

mustangfreek
14 March 2016, 18:40
SMOS is taking over.....lol good stuff fellas..

Josh S.
5 April 2016, 08:58
https://farm2.staticflickr.com/1534/26162262242_657e6184a8_k.jpg (https://flic.kr/p/FRSr5W)Precision GFY-15 (https://flic.kr/p/FRSr5W) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

UWone77
6 April 2016, 18:54
974

Josh S.
7 April 2016, 15:50
https://farm2.staticflickr.com/1698/26231409761_30af0fa506_k.jpg (https://flic.kr/p/FXYQex)Double SMOS (https://flic.kr/p/FXYQex) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

UWone77
7 April 2016, 18:57
985

Brahmzy
7 April 2016, 19:32
^^ looks great!

Pyzik
8 April 2016, 15:08
STILL waiting on a barrel. I need more money in my life.

https://farm2.staticflickr.com/1558/26248559471_6396d65cd6_b.jpg (https://flic.kr/p/FZuJfc)
SMOS (https://flic.kr/p/FZuJfc) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Dstrbdmedic167
8 April 2016, 19:03
A little teaser just for wevo....

990

SINNER
8 April 2016, 20:35
Foliage? Looks killer

EO3
8 April 2016, 21:39
A little teaser just for wevo....

990

Mmmmmmmmm..... I already want to buy another SMOS set and do a bazooka green build. Nice pic!

mustangfreek
9 April 2016, 01:35
A little teaser just for wevo....

990


Not bad, in for the final pics of this color, kinda curious how it compares to foliage, if you got a foliage something laying around could you snap a pic against the bazooka green thnx

Dstrbdmedic167
9 April 2016, 05:11
Foliage? Looks killer
Bazooka Green


Mmmmmmmmm..... I already want to buy another SMOS set and do a bazooka green build. Nice pic!

Thanks. I really like this color


Not bad, in for the final pics of this color, kinda curious how it compares to foliage, if you got a foliage something laying around could you snap a pic against the bazooka green thnx

No foliage here sorry.

Josh S.
17 April 2016, 14:54
97% chance I will be SBR'ing the GFY lower in a couple weeks. [:D]

https://farm2.staticflickr.com/1556/25887622223_51479b28c9_k.jpg (https://flic.kr/p/FrAQbc)SMOS (https://flic.kr/p/FrAQbc) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

Pyzik
17 April 2016, 15:49
97% chance I will be SBR'ing the GFY lower in a couple weeks. [:D]

https://farm2.staticflickr.com/1556/25887622223_51479b28c9_k.jpg (https://flic.kr/p/FrAQbc)SMOS (https://flic.kr/p/FrAQbc) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr
Great shot.

I've got the Arisaka finger stop and their QD mount on the way.

Phone pic for now, barrel in.http://uploads.tapatalk-cdn.com/20160417/a811a7637c909c531d82bd8e12777355.jpg

Sent from my SM-N910V using Tapatalk

Josh S.
17 April 2016, 19:02
Here is my first ever watermarked photo thanks to EO3!

https://farm2.staticflickr.com/1458/26493619325_04d9d09304_z.jpg (https://flic.kr/p/Gn9J16)
SMOS (https://flic.kr/p/Gn9J16) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

Pyzik
17 April 2016, 19:06
Here is my first ever watermarked photo thanks to EO3!

https://farm2.staticflickr.com/1458/26493619325_04d9d09304_z.jpg (https://flic.kr/p/Gn9J16)
SMOS (https://flic.kr/p/Gn9J16) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr
I like it! And the previous. Some great shots.

Sent from my SM-N910V using Tapatalk

Josh S.
17 April 2016, 19:52
I like it! And the previous. Some great shots.

Sent from my SM-N910V using Tapatalk

Thanks man! I've still got a long way to go, but my photos are certainly better now than they were just a couple months ago.

UWone77
20 April 2016, 21:05
1031

SINNER
21 April 2016, 04:44
Nice clean build.

Pyzik
21 April 2016, 05:09
Nice clean build.
Agreed! ....except that grip....

Sent from my SM-N910V using Tapatalk

Duffy
21 April 2016, 06:26
Josh,
I rotate pictures taken of our products by various photographers, to all of whom I am grateful [adore] For the last few weeks, David's pics have graced our home page. I can cycle 5 or 6 pics in the carousel on the home page.

I leave all the watermarks intact.

http://forwardcontrolsdesign.com/

If you are interested, please send me some pics you have taken of our products (if you don't have any, let me know and I'll supply them) and I will put them on our home page [:D]

Pyzik
21 April 2016, 06:33
Josh,
I rotate pictures taken of our products by various photographers, to all of whom I am grateful [adore] For the last few weeks, David's pics have graced our home page. I can cycle 5 or 6 pics in the carousel on the home page.

I leave all the watermarks intact.

http://forwardcontrolsdesign.com/

If you are interested, please send me some pics you have taken of our products (if you don't have any, let me know and I'll supply them) and I will put them on our home page [:D]
It's awesome to see them up on the site too.

I know I've had a couple guys order some because I've recomended.

Hell, had a guy message me as say he ordered a SMOS upper, lower and rail thanks to me. Haha

Sent from my SM-N910V using Tapatalk

Duffy
21 April 2016, 07:52
I don't know enough photography to do what talented folks like David can do, but I think I know what makes them special and successful.

If a picture can convey emotions, make you think and imagine, the photographer knows his business. Sometimes a pretty picture is just that and pleasant to look at, it's the pictures that compell you dwell on them that are powerful.

UWone77
21 April 2016, 08:10
Agreed! ....except that grip....

Sent from my SM-N910V using Tapatalk

Budget Grip...

but hey it's not like I used a KAK barrel. [BD]

Pyzik
21 April 2016, 08:11
Budget Grip...

but hey it's not like I used a KAK barrel. [BD]
Hahaha, I KNEW it was coming. [emoji1]

Temporary.

Sent from my SM-N910V using Tapatalk

Josh S.
21 April 2016, 19:01
Josh,
I rotate pictures taken of our products by various photographers, to all of whom I am grateful [adore] For the last few weeks, David's pics have graced our home page. I can cycle 5 or 6 pics in the carousel on the home page.

I leave all the watermarks intact.

http://forwardcontrolsdesign.com/

If you are interested, please send me some pics you have taken of our products (if you don't have any, let me know and I'll supply them) and I will put them on our home page [:D]

Man you just made my day, Roger! It'd be an honor.

PM inbound! [:D]

Dstrbdmedic167
28 April 2016, 19:02
Full Rifle in all its glory.. As slippers has been relentlessly reminding me I need a FDE mount/Scope/Light to complete the theme here.. We shall see but for now..

1082

UWone77
28 April 2016, 19:04
You need some FDE BUIS and FDE MLOK covers to complete the look.

Dstrbdmedic167
28 April 2016, 19:07
You need some FDE BUIS and FDE MLOK covers to complete the look.

Agreed. Hadn't thought much about the FDE MLOK covers. I have some keymod but no MLOK.. RA FDE BUIS would be sweet!

EO3
29 April 2016, 09:04
Agreed. Hadn't thought much about the FDE MLOK covers. I have some keymod but no MLOK.. RA FDE BUIS would be sweet!

Some Geissele Super Precision in DDC would be REAL sweet on this [BD]

Dstrbdmedic167
29 April 2016, 09:05
Some Geissele Super Precision in DDC would be REAL sweet on this [BD]

Ohh yea that's the mount Slippers keeps trying to talk me into. I'll buy yours...

UWone77
29 April 2016, 09:34
Ohh yea that's the mount Slippers keeps trying to talk me into. I'll buy yours...

According to you, it's basically rebranded UTG mounts [:D]

Dstrbdmedic167
29 April 2016, 09:35
According to you, it's basically rebranded UTG mounts [:D]

I've said a lot of things but I don't recall that being one of them... [confused]

SINNER
29 April 2016, 09:39
I'd rattle can that thing. At least it would match then. LOL

Josh S.
16 May 2016, 20:48
https://farm8.staticflickr.com/7719/26434734294_525a8312b4_k.jpg (https://flic.kr/p/GgWVwW)
GFY-15 (https://flic.kr/p/GgWVwW) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

Dstrbdmedic167
16 May 2016, 21:06
https://farm8.staticflickr.com/7719/26434734294_525a8312b4_k.jpg (https://flic.kr/p/GgWVwW)
GFY-15 (https://flic.kr/p/GgWVwW) by NFI Photos (https://www.flickr.com/photos/139771595@N03/), on Flickr

You need a CMC like this...

1170

Josh S.
16 May 2016, 21:38
Funds are kinda tight right now but I'm planning on it in the near future. I'm torn between that, a flat Lantac/CMC, and a curved Lantac/CMC.

UWone77
16 May 2016, 21:57
Funds are kinda tight right now but I'm planning on it in the near future. I'm torn between that, a flat Lantac/CMC, and a curved Lantac/CMC.

SD-C/E

Josh S.
16 May 2016, 22:03
SD-C/E

My cousin got the SD-E for his and I really like it. I think the SD-C would be a better fit for mine but I think I want a single stage for this one. Plus I can get a CMC for much less than a Geissele.

fledge
16 May 2016, 22:25
Beauty pic.

My GFY will have an SD-E when back from BDL. Sensitive trigger. I got a curved Lantac/CMC for an SBR build also getting coated so no trigger time on that one yet.


Sent from my iPad using Tapatalk

UWone77
4 June 2016, 20:46
Lost my screws for this one... replacements on the way, but it should be a fun 12.5" Faxon/SMOS/Fortis Blaster.

1280

SINNER
5 June 2016, 05:43
I always figured you had a few loose screws...

Clean looking upper.

Stickman
5 June 2016, 18:05
1284

SINNER
5 June 2016, 19:27
Looks like an excuse to build that .260.

mustangfreek
8 June 2016, 00:52
Looks like an excuse to build that .260.

Always been intrigued by the 260 and another want on the list..

This pic reminds me I got a smos rail that needs to be assembled into something..not a 308 but something different with match grade ammo..lol..[BD]

Stickman
11 June 2016, 23:51
https://c2.staticflickr.com/2/1598/25081100945_81983461bd_b.jpg (https://flic.kr/p/EdkcuV)Stickman (https://flic.kr/p/EdkcuV) by Stickman (https://www.flickr.com/photos/stickgunner/), on Flickr

Pyzik
1 August 2016, 10:31
Finally breaking her in. Borrowed an optic. Still need to pick something up to finish this thing off.

https://c4.staticflickr.com/9/8108/28702300555_d72981d73f_b.jpg (https://flic.kr/p/KJjMYX)
SMOS Breaking In (https://flic.kr/p/KJjMYX) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Aragorn
1 August 2016, 11:02
How well is that flash suppressor working just at suppressing flash?

Pyzik
1 August 2016, 11:09
How well is that flash suppressor working just at suppressing flash?

I didn't see any flash but really wasn't paying much attention. :(

I'll get it out in some low light and see when I can.

UWone77
23 August 2016, 20:34
1604

Molon
29 August 2016, 17:57
What torque setting did y'all use for the screws that secure the handguard to the barrel nut?

Jerry R
29 August 2016, 18:44
1604

Accent pieces on this build really set it off !! Nicely done.

UWone77
30 August 2016, 17:05
Accent pieces on this build really set it off !! Nicely done.

I threw some FDE Magpul MLOK Covers on it today, looks pretty nice.

SINNER
30 August 2016, 17:26
1604

That looks killer. And a fantastic 1-4 to top it off.


What torque setting did y'all use for the screws that secure the handguard to the barrel nut?

60 inch/lbs with red locktite.

alamo5000
30 August 2016, 17:49
60 inch/lbs with red locktite.

Not planning on ever removing the thing? What happens if you decide to cerekote the parts or reconfigure your rifle for whatever reason?

Don't you have to basically melt off red loctite with high heat? (I'm asking not telling)... just wondering if red loctite is something to look into....not that I have a rail (yet) that would need it.

UWone77
30 August 2016, 17:50
Not planning on ever removing the thing? What happens if you decide to cerekote the parts or reconfigure your rifle for whatever reason?

Don't you have to basically melt off red loctite with high heat? (I'm asking not telling)... just wondering if red loctite is something to look into....not that I have a rail (yet) that would need it.

I would not use red loctite personally on anything AR related.

alamo5000
30 August 2016, 18:14
I would not use red loctite personally on anything AR related.

That was the exact same impression/thought that I had too so when I saw his post I was like 'hang on a minute...isn't that stuff permanent?'

Joelski
30 August 2016, 18:15
What is that trigger?

alamo5000
30 August 2016, 18:19
What is that trigger?

CMC AR-15 LANTAC E-CT1 FLAT TRIGGER?

http://www.exilemachine.net/shop/cmc-ar-15-lantac-e-ct1-flat-trigger-101106.html?zenid=430cd520a535ca63064c4ada866aa56e

SINNER
30 August 2016, 18:44
After blue locktite and Rocksett failed to keep the screws tight in a NSR I started using red locktite on them. Place the Allen key in the screw and hit the key with a pencil torch and they come right out. 271 has a melt failure temperature rating of only 500*. It's only a homeowner grade locking compound after all.

fledge
3 September 2016, 21:02
Headed out for pinning this week.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/B399B167-BAAC-4B4F-893D-D31890FDB4CD_zpscpcxqn7m.jpg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/B399B167-BAAC-4B4F-893D-D31890FDB4CD_zpscpcxqn7m.jpg.html)

UWone77
4 September 2016, 11:24
1641
1642

UWone77
7 September 2016, 18:50
SMOS Barrels? Yes Please.


1659

SINNER
7 September 2016, 18:53
Stainless Rock Creek?

UWone77
7 September 2016, 19:04
Stainless Rock Creek?

Rock Creek and Lilja.

EO3
7 September 2016, 19:45
Rock Creek and Lilja.

I hear these suckers shoot pretty nicely. Just got a 10.3" one of these and I'm eager to try it out!

UWone77
7 September 2016, 19:59
I hear these suckers shoot pretty nicely. Just got a 10.3" one of these and I'm eager to try it out!

Although I will likely pick a SMOS barrel up, I don't see it shooting much differently than my existing Rock Creek barrels. Having said that RC barrels shoot pretty well as long as the shooter does his job.

SINNER
7 September 2016, 20:14
RC are nice but the Lilja def has my interest. Any info on these?

UWone77
7 September 2016, 20:38
RC are nice but the Lilja def has my interest. Any info on these?

Just had a brief conversation with Eric tonight, so just a few details.

12.5 mid
10.5, 12.5 carbine
14.5, 16 mid
18 intermediate

18 Lilja, and I believe the rest are RC.

SINNER
7 September 2016, 20:44
I need a 12.5 middy and likely grab a Lilja.

UWone77
7 September 2016, 20:51
I need a 12.5 middy and likely grab a Lilja.

I've got a Rainier RC 12.5 Mid, shoots very well suppressed.

fledge
8 September 2016, 13:05
They are also now making their own takedown pins:

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/B37579FE-E712-4D2F-BA88-FAEC008A8E87_zpsk5arixi4.jpeg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/B37579FE-E712-4D2F-BA88-FAEC008A8E87_zpsk5arixi4.jpeg.html)

Pyzik
8 September 2016, 13:18
Ooh, nice

Sent from my SM-N910V using Tapatalk

SINNER
8 September 2016, 15:23
I've got a Rainier RC 12.5 Mid, shoots very well suppressed.

Exactly my intentions. I wonder how the port size compares between the two variations.

UWone77
28 September 2016, 10:29
Got my SMOS order in... just waiting for the SMOS Barrel to ship before finishing it. Patriot Brown w/FDE furniture. However, this patriot brown looks several shades lighter than what I'm used to.


1744

Aragorn
28 September 2016, 10:30
Got my SMOS order in... just waiting for the SMOS Barrel to ship before finishing it. Patriot Brown w/FDE furniture. However, this patriot brown looks several shades lighter than what I'm used to.


1744

Looks good to me! And you got your quad rail :)

Pyzik
28 September 2016, 10:43
Got my SMOS order in... just waiting for the SMOS Barrel to ship before finishing it. Patriot Brown w/FDE furniture. However, this patriot brown looks several shades lighter than what I'm used to.


1744

Really not used to seeing quad rails anymore. Looks good though. I like the color.

UWone77
30 September 2016, 20:53
1761

EO3
30 September 2016, 21:14
1761

I'm really digging the patriot brown and FDE combo.

UWone77
1 October 2016, 19:21
1769

Pyzik
1 October 2016, 19:28
1769
Purdy. So these shirts are a thing?

Sent from my SM-N910V using Tapatalk

UWone77
1 October 2016, 19:30
Purdy. So these shirts are a thing?

Sent from my SM-N910V using Tapatalk

Make sure you ask for a shirt Dave. These things are sweet.

EO3
1 October 2016, 19:39
Purdy. So these shirts are a thing?

Sent from my SM-N910V using Tapatalk
BUY A SHIRT!!! I hear they're supposed to get some pretty cool new shirts when the GFY shirts are gone. [:D]

Pyzik
1 October 2016, 19:42
BUY A SHIRT!!! I hear they're supposed to get some pretty cool new shirts when the GFY shirts are gone. [:D]
Ah, I was thinking this was what you'd decided on.

Sent from my SM-N910V using Tapatalk

mustangfreek
2 October 2016, 02:12
Nice build UW..

They just released their quad rails and have a $75 off code at the moment..I really like the looks of them

UWone77
2 October 2016, 20:49
The quad rail is clean......


1773

Dstrbdmedic167
2 October 2016, 21:13
Nice! Its growing on me. Also digging the shirt

UWone77
3 October 2016, 07:46
Nice build UW..

They just released their quad rails and have a $75 off code at the moment..I really like the looks of them

You should get a quad. I've got a 9.1" Quad coming for a future SBR upper.

Pyzik
3 October 2016, 07:49
I need a non black gun...

Dstrbdmedic167
3 October 2016, 09:13
I need a non black gun...

I need a black gun...


Sent from my iPhone using Tapatalk

EO3
3 October 2016, 14:04
I need a black gun...


Sent from my iPhone using Tapatalk

No... Black guns are the worst. What's the point in having guns without spending extra money on paint?! [BD] #AllColorsMatter

Joelski
3 October 2016, 14:46
#Black Guns Matter!

#CanIbeadopted?

UWone77
4 October 2016, 12:33
When talking to Eric the other day, I guess the .308 is just going to look like a bigger GFY.

#whatnoveskeshouldhavedone

fledge
4 October 2016, 12:49
Would be cool in a gen 2 like Mega's forthcoming SF.

Joelski
4 October 2016, 13:08
No... Black guns are the worst. What's the point in having guns without spending extra money on paint?! [BD] #AllColorsMatter

Paint made the space shuttle's external fuel tank weigh an extra 8k pounds. Extra weight is teh payne!!

Jinxy
10 October 2016, 17:14
The quad rail is clean......


1773

This will def be another SMOS build for me...

UWone77
12 October 2016, 20:17
Still not sure what barrel. Thought I was going to go with the Rock Creek SMOS, but I have several Rainier versions already.

1817

DISCOM
15 October 2016, 06:01
UW I had that same problem (barrel choice) till I took Friday off and . . . .

BCM 16" SS410 Barrel with Mid Length Gas (stripped) 1/8 Twist (Ionbond BLACK)

and that is just the start of the list. Yea, might have spent some money to complete the SMOS build. [BD]

UWone77
18 October 2016, 15:57
1851

UWone77
18 October 2016, 15:58
1852

Dstrbdmedic167
18 October 2016, 16:08
Nice. What's the pricing on these? Wish I had one for my smos build


Sent from my iPhone using Tapatalk

UWone77
18 October 2016, 16:13
Nice. What's the pricing on these? Wish I had one for my smos build


Sent from my iPhone using Tapatalk

I think they are going up this week. There will be a WEVO discount.

Dstrbdmedic167
18 October 2016, 16:14
I think they are going up this week. There will be a WEVO discount.

Sweet!


Sent from my iPhone using Tapatalk

Pyzik
18 October 2016, 17:44
I think they are going up this week. There will be a WEVO discount.
Sigh. I need a second job....

Sent from my SM-N910V using Tapatalk

UWone77
18 October 2016, 20:15
1857

fledge
18 October 2016, 20:39
Are these made by the same folks that make the AXTS barrels?

I think I need an 18" and a 12.5". Wonder what they weight.

mustangfreek
19 October 2016, 02:15
Nice looking barrels...BHW ?

UWone77
19 October 2016, 09:57
Are these made by the same folks that make the AXTS barrels?

I think I need an 18" and a 12.5". Wonder what they weight.

I don't know who turns their barrels, but AXTS's barrels are made from Shilen Blanks, like the Rainier Arms UltraMatch line.

I didn't ask if SMOS turns their own either, but they are all marked, at least the ones I have with RC, which is Rock Creek.

I'll see if I can weigh them later tonight.

EO3
19 October 2016, 17:08
SMOS turns their own barrels.

fledge
19 October 2016, 19:06
Good to know. How much experience do they have with this? Is this something they need to perfect or have they been doing this for a while for OEM?

old11bravo
20 October 2016, 03:50
Just finished gathering my lower, upper and rail for my SMOS build. Now these barrels pop up and geezus! What now?

I have an AXTS shilen 16" SS barrel I was going to assemble with it, complete with AXTS BCG and Charging Handle. Do I need to rethink this?

GOST
20 October 2016, 04:19
I wouldn't, that AXTS Shilen barrel is a nice piece. Besides you need to be saving money for the WEVO receivers.[BD]

EO3
20 October 2016, 14:50
For those interested: Barrels and Complete Uppers are now up on the SMOS website. More complete upper configurations will be added soon.

Pyzik
20 October 2016, 14:51
For those interested: Barrels and Complete Uppers are now up on the SMOS website. More complete upper configurations will be added soon.
Mmmmmmmm

Sent from my SM-N910V using Tapatalk

UWone77
22 October 2016, 19:39
Should have a 10.3, 13.7, and 14.5 also available soon.

They all come with gas blocks and gas tubes as well, which makes the price before your WEVO discount pretty competitive.

1875

fledge
22 October 2016, 21:27
10.3 will be nice though a 10" would be better with their 9.18" handguard. I've got a 10.3" BA barrel on the SMOS 9" handguard and wish the gap was filled a little more. That's being picky, I know.

Any chance you have some barrel weights?

SINNER
23 October 2016, 04:39
Nice to see their barrels fall in with current pricing for Rock Creek from other vendors.

Some of their other items they are far too proud of.

UWone77
24 October 2016, 04:00
10.3 will be nice though a 10" would be better with their 9.18" handguard. I've got a 10.3" BA barrel on the SMOS 9" handguard and wish the gap was filled a little more. That's being picky, I know.

Any chance you have some barrel weights?

I'll try to get to that tonight. The weekend went by too fast... as usual, but I'm sure I don't have to tell anyone that.

UWone77
25 October 2016, 17:36
1885

fledge
25 October 2016, 18:01
1885

Finally ready to be assembled. Colors are great.

Which muzzle device? A CMT?

Pyzik
25 October 2016, 18:07
Finally ready to be assembled. Colors are great.

Which muzzle device? A CMT?
Flash comp

Sent from my SM-N910V using Tapatalk

UWone77
25 October 2016, 18:24
Finally ready to be assembled. Colors are great.

Which muzzle device? A CMT?

Haven't decided, it'll be a suppressor mount though. ASR, 51T or SOCOM.

Pyzik
25 October 2016, 18:56
Haven't decided, it'll be a suppressor mount though. ASR, 51T or SOCOM.
I new it'd be a mount. It's gonna look great. I am betting it'll be a "long" flash hider style mount. ;)

Sent from my SM-N910V using Tapatalk

UWone77
26 October 2016, 17:59
1895

fledge
26 October 2016, 19:32
UW, are you a lefty? I ask because of the location of the QD sling mount.

UWone77
26 October 2016, 19:40
UW, are you a lefty? I ask because of the location of the QD sling mount.

That is correct.

SINNER
26 October 2016, 20:13
Backasswards

UWone77
27 October 2016, 19:58
1902

Weights top to bottom:
22.1oz
25.9oz
32.7oz
40.3oz

Gas Block 1.4oz

SINNER
27 October 2016, 20:34
Any idea if they are cut or button rifled?

UWone77
27 October 2016, 20:48
Any idea if they are cut or button rifled?

They are cut.

UWone77
3 November 2016, 22:30
Finished it up with FDE Battle Arms parts.

1987

Aragorn
4 November 2016, 09:28
^^^Man that looks good.

Pyzik
4 November 2016, 09:33
Finished it up with FDE Battle Arms parts.

1987
James was right. You are the worst culprit at getting me to spend my money.

Sent from my SM-N910V using Tapatalk

DISCOM
5 November 2016, 13:54
Yep, UW has a funny way of doing that subconsciously and you (we) don't mind spending it after the suggestions. . . . Damn he is good. . . [BD]

https://youtu.be/caMHdcRNEkc

2008

JSchell1309
6 November 2016, 21:06
http://i.imgur.com/GObhdiI.png

Finally got a decent shot of it all complete. Still love the overall look of the SMOS products.

GOST
7 November 2016, 02:52
Nice rifle JSchell.

UWone77
7 November 2016, 08:31
2033

Pyzik
9 November 2016, 10:36
http://i.imgur.com/GObhdiI.png

Finally got a decent shot of it all complete. Still love the overall look of the SMOS products.

Nice!

https://c7.staticflickr.com/6/5344/30754647542_805c5503c4_b.jpg (https://flic.kr/p/NRFBeQ)
SMOS (https://flic.kr/p/NRFBeQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Battle Cock
9 November 2016, 16:08
Nice!

https://c7.staticflickr.com/6/5344/30754647542_805c5503c4_b.jpg (https://flic.kr/p/NRFBeQ)
SMOS (https://flic.kr/p/NRFBeQ) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

Glad to see you are already getting better pictures out of that ammo can than I ever did.

JSchell1309
10 November 2016, 08:37
Nice!


Thanks, I'm not going to lie, I may have stolen the idea for the strike industry pins and dust cover from your photos. They just work so well with the lines of these lowers.

The rifle never fails to get questions or compliments at the range. Really happy SMOS offered such a nice discount to the forum. So much nicer than regular stripped sets.

Slippers
10 November 2016, 09:10
I simply cannot get past strike industries logo which resembles the schutzstaffel.

GOST
10 November 2016, 10:02
I simply cannot get past strike industries logo which resembles the schutzstaffel.

I feel the same, brought it up when they changed their logo.

inthegame
16 November 2016, 14:44
Just noticed this on their Instagram. An SMOS upper with Forward Assist.

2095

Ive been waiting on this

UWone77
16 November 2016, 14:57
Just noticed this on their Instagram. An SMOS upper with Forward Assist.

2095

Ive been waiting on this

Yeah they're a little behind, should have been out by now, but enjoying how much product they are putting out now.

schambers
16 November 2016, 17:41
I simply cannot get past strike industries logo which resembles the schutzstaffel.

Glad someone else said it. Felt like I was the only one that noticed

EO3
16 November 2016, 19:09
Check these out! [BD]2102

UWone77
16 November 2016, 19:24
Those .308 Receivers look good!


This last GFY set is getting a 10.3 Barrel and a stamp... Stay tuned for 7-9 months.

2104

Josh S.
16 November 2016, 19:37
Those .308 Receivers look good!


This last GFY set is getting a 10.3 Barrel and a stamp... Stay tuned for 7-9 months.

2104

Man I need one of those quad rails! UW, do you know if they have slots for KAC panels to lock onto? I'm sure they do but I'm curious.

UWone77
16 November 2016, 20:05
Man I need one of those quad rails! UW, do you know if they have slots for KAC panels to lock onto? I'm sure they do but I'm curious.

Don't they just slide on and the clip goes into the slot? Seems to work just fine, just tried one. The Cerakote makes the panel pretty tight as is.

UWone77
16 November 2016, 20:06
2106

Josh S.
16 November 2016, 20:13
Don't they just slide on and the clip goes into the slot? Seems to work just fine, just tried one. The Cerakote makes the panel pretty tight as is.

Sounds good, thanks. I used to be under the impression that KAC panels work on every quad rail, but my cousin used to have a DPMS Mini-SASS and they wouldn't snap into place on the rail. After that I don't know what to believe anymore lol

UWone77
16 November 2016, 20:20
Sounds good, thanks. I used to be under the impression that KAC panels work on every quad rail, but my cousin used to have a DPMS Mini-SASS and they wouldn't snap into place on the rail. After that I don't know what to believe anymore lol

I blame you now... I was going to do another FDE/Patriot Brown. But after sliding on the KAC panels, It looks like Black/Patriot Brown.

Damn you Josh... I gotta go figure out furniture again!

fledge
16 November 2016, 22:33
Love the 308. Gonna wait till they have the set. Will the upper be proprietary? Looks ready for a Maten.

Josh S.
17 November 2016, 08:45
I blame you now... I was going to do another FDE/Patriot Brown. But after sliding on the KAC panels, It looks like Black/Patriot Brown.

Damn you Josh... I gotta go figure out furniture again!

Haha you'll thank me later! Personally I think a Patriot Brown SMOS w/ black furniture would look really good. Especially with the quad rail and black panels.

I think I'm gonna order a quad rail tonight so my SMOS KAC panel will have a home.

SINNER
17 November 2016, 11:18
As bad as Noveske with the Armalite love. lol

fledge
18 November 2016, 14:03
SMOS working on their own discover.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/B9FBF913-DF74-48C0-9596-735B6B1249C3_zpsthqhib1q.jpeg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/B9FBF913-DF74-48C0-9596-735B6B1249C3_zpsthqhib1q.jpeg.html)

Pyzik
18 November 2016, 14:12
SMOS working on their own discover.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/B9FBF913-DF74-48C0-9596-735B6B1249C3_zpsthqhib1q.jpeg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/B9FBF913-DF74-48C0-9596-735B6B1249C3_zpsthqhib1q.jpeg.html)
Awesomesauce

Sent from my SM-N910V using Tapatalk

schambers
18 November 2016, 15:07
Is there any chance SMOS will release a rail thats designed to go over a suppressor, and sell it as an upper/rail combo?

inthegame
18 November 2016, 15:24
It would be awesome if they release new items for Black Friday, before my holiday budget is shot.

UWone77
18 November 2016, 18:42
2116

SINNER
18 November 2016, 20:30
Love that color. Need to order some browns.

JSchell1309
19 November 2016, 07:08
http://i.imgur.com/3RzZp2z.jpg

Home grown banana mag.

Dstrbdmedic167
19 November 2016, 10:52
2120

Axlnut
19 November 2016, 11:15
2120

Sexy.

Dstrbdmedic167
19 November 2016, 11:16
Sexy.

Thanks!


Sent from my iPhone using Tapatalk

UWone77
19 November 2016, 11:17
Needs screws....

Dstrbdmedic167
19 November 2016, 11:22
Needs screws....

An accurate statement...


Sent from my iPhone using Tapatalk

SINNER
19 November 2016, 13:26
Needs a gunsmith for difficult work like that.

UWone77
19 November 2016, 20:06
2122

mustangfreek
20 November 2016, 02:03
Needs a gunsmith for difficult work like that.


Maybe...if there's a RAC on the end he might need a hand...[:D]

old11bravo
20 November 2016, 20:34
Look out, amateur coming through....

http://i65.tinypic.com/ddympi.jpg

http://i67.tinypic.com/333lamr.jpg

http://i67.tinypic.com/s3pswi.jpg

http://i67.tinypic.com/28beh76.jpg

http://i65.tinypic.com/zo7srk.jpg

http://i64.tinypic.com/n20al2.jpg

http://i65.tinypic.com/wtitfs.jpg

http://i67.tinypic.com/j6ofx1.jpg

http://i67.tinypic.com/ilbza9.jpg

http://i63.tinypic.com/6yh7c3.jpg

fledge
20 November 2016, 21:16
Beautiful. I like the SM upper on the GFY lower.

EO3
20 November 2016, 21:58
That's a good looking stick, old11bravo!

UWone77
20 November 2016, 22:05
Beautiful. I like the SM upper on the GFY lower.

Don't see that combo too often!

old11bravo
20 November 2016, 22:35
Thanks fellas. The fit between the upper and lower receivers is extremely snug with absolutely no discernible play between the two.

I had acquired the upper first and later called SMOS to order the SM15 lower receiver utilizing the LE discount. Unbeknownst to me me they upgraded my order to the GFY lower receiver. It was a pleasant surprise when I picked up my package from my local FFL. The guys at SMOS are second to none in my book. Anyway, that is how the SM13 upper ended up on a GFY lower. The fit wasn't just snug but actually very tight. It worked out well for me.

Pyzik
21 November 2016, 04:24
2122
mmmmm


Look out, amateur coming through....

[IMG]http://i65.tinypic.com/ddympi.jpg[IMG]

[IMG]http://i67.tinypic.com/333lamr.jpg[IMG]

[IMG]http://i67.tinypic.com/s3pswi.jpg[IMG]

[IMG]http://i67.tinypic.com/28beh76.jpg[IMG]

[IMG]http://i65.tinypic.com/zo7srk.jpg[IMG]

[IMG]http://i64.tinypic.com/n20al2.jpg[IMG]

[IMG]http://i65.tinypic.com/wtitfs.jpg[IMG]

[IMG]http://i67.tinypic.com/j6ofx1.jpg[IMG]

[IMG]http://i67.tinypic.com/ilbza9.jpg[IMG]

[IMG]http://i63.tinypic.com/6yh7c3.jpg[IMG]

That ain't no amateur rifle... nice.

UWone77
21 November 2016, 23:53
Some pics from SMOS of their clear anodized sets

2134
2135

Slippers
22 November 2016, 04:24
7075 with clear hard coat always looked cool to me, gives the light bronze/tan color.

Dstrbdmedic167
22 November 2016, 07:21
7075 with clear hard coat always looked cool to me, gives the light bronze/tan color.

I thought about you when I saw these. Need some mounts and bodies to match! [emoji38]


Sent from my iPhone using Tapatalk

PrimerProjects
24 November 2016, 17:02
SMOS GFY / Superlative Arms Piston Build

http://i.imgur.com/BbgLtFr.jpg

http://i.imgur.com/2IEXeUX.jpg

UWone77
24 November 2016, 20:47
SMOS GFY / Superlative Arms Piston Build



I've seen your work on IG. Thanks for dropping by to throw some pics up!

EO3
24 November 2016, 20:48
I've seen your work on IG. Thanks for dropping by to throw some pics up!

Ditto! Great to see you on here, PrimerProjects!

PrimerProjects
25 November 2016, 08:28
Ditto! Great to see you on here, PrimerProjects!


I've seen your work on IG. Thanks for dropping by to throw some pics up!

Thanks, guys! I came for the giveaway, and now staying for this awesome forum.

Pyzik
25 November 2016, 08:32
SMOS GFY / Superlative Arms Piston Build

http://i.imgur.com/BbgLtFr.jpg


Love this shot!

I too have followed you for quite some time on IG. Good to see you here.

Sent from my SM-G930V using Tapatalk

PrimerProjects
25 November 2016, 08:37
Love this shot!

I too have followed you fire quite some time on IG. Good to see you here.

Sent from my SM-G930V using Tapatalk

Thanks! It's like I found the secret IG alternative hang out. Good to see all you photo-pros on here.

UWone77
26 November 2016, 20:37
2173

Dstrbdmedic167
26 November 2016, 20:45
Nice! I need a PRO!

UWone77
1 December 2016, 11:44
2242

Pyzik
1 December 2016, 11:45
Nice! I need a PRO!
Me too

Sent from my SM-G930V using Tapatalk

UWone77
2 December 2016, 17:02
2252

mustangfreek
9 December 2016, 04:04
Allright I got a request for a pic or 2...Someone help me and my OCD out..[BD]

-Looking to see how one of these GFY uppers mates up with a rainier mod 3 lower, looking at parts to finish the battlekitty build


-Also I have a smos sm12 mlok rail sitting here and curious if it matches up with there upper as the Gfy rail does to the Gfy upper as in the pic below?


2295

This is the rail I have sm12"

http://cdn.shopify.com/s/files/1/0747/8419/products/STKL8593-10_1024x1024.jpg?v=1460569660

Pyzik
9 December 2016, 08:34
Allright I got a request for a pic or 2...Someone help me and my OCD out..[BD]

-Looking to see how one of these GFY uppers mates up with a rainier mod 3 lower, looking at parts to finish the battlekitty build


-Also I have a smos sm12 mlok rail sitting here and curious if it matches up with there upper as the Gfy rail does to the Gfy upper as in the pic below?


2295

This is the rail I have sm12"

http://cdn.shopify.com/s/files/1/0747/8419/products/STKL8593-10_1024x1024.jpg?v=1460569660

If I were a betting man.... I would bet that it would line up well.
You can see with their SM uppers that they add the "flare". The shape of the SM rail is quite similar to the the GFY.

NOT MY IMAGE
http://i.imgur.com/Xf3NVvi.jpg

velocity2006
9 December 2016, 09:08
You can use my image :P even though the lighting sucks... Chris needed more lights lol.

SMOS specifically designed their pre GFY receivers with the rail in mind. As pictured above you can see they machine the uppers to match the rail. It would match on a Rainier lower about as well as any other forged upper I would imagine.

I do have a Mod3 lower, but haven't made any major AR purchases in quite some time, so I don't have any SMOS stuff laying around to put on the lower.

Pyzik
9 December 2016, 09:14
You can use my image [emoji14] even though the lighting sucks... Chris needed more lights lol.

SMOS specifically designed their pre GFY receivers with the rail in mind. As pictured above you can see they machine the uppers to match the rail. It would match on a Rainier lower about as well as any other forged upper I would imagine.

I do have a Mod3 lower, but haven't made any major AR purchases in quite some time, so I don't have any SMOS stuff laying around to put on the lower.
Didn't know that was your image. Google.

I think it would look fine on a kitty lower.

Sent from my SM-G930V using Tapatalk

velocity2006
9 December 2016, 09:24
VI watermark. Page 1 of this thread lol.

Pyzik
9 December 2016, 09:36
VI watermark. Page 1 of this thread lol.
I see it now. Guess I didn't look very hard. Ha

Sent from my SM-G930V using Tapatalk

velocity2006
9 December 2016, 09:38
I like mine small, slightly transparent and unobtrusive. I tried the huge watermark and didn't like it.

fledge
9 December 2016, 11:00
Yes the SM15 rail lines up with the GFY upper. The bump out on the SM15 is like the one on the SMOS quad. The SM15 upper (discontinued) also lines up perfectly with the GFY rails.

PrimerProjects
9 December 2016, 15:43
Updated the build a little... done for 2016.

http://i.imgur.com/CUrdNwFh.jpg

fledge
9 December 2016, 16:00
Love the chopped MK8 rail. Did you remove the left rotation tab too?

Seeing your update on holtworks account got me thinking.... put this together today. I didn't expect the falkor rail to match up so well with the GFY.

http://i1291.photobucket.com/albums/b556/fledge2000/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg (http://s1291.photobucket.com/user/fledge2000/media/SMOS/E6667986-4086-4087-92AF-B3D1F7626D9E_zpspbtdw3pi.jpg.html)

PrimerProjects
9 December 2016, 16:23
Love the chopped MK8 rail. Did you remove the left rotation tab too?

Seeing your update on holtworks account got me thinking.... put this together today. I didn't expect the falkor rail to match up so well with the GFY.



Both tabs are actually still in place, just shaved down on the inside.

And that's sick! I've been wanting that rail since last year's shot... It's unfortunate that it's still not available as a stand alone part.

fledge
9 December 2016, 21:24
Thanks. Actually, I bought the rail as a stand alone. I called them and they did the transaction on the phone. Maybe they'll do the same for you.

velocity2006
9 December 2016, 21:50
Updated the build a little... done for 2016.

http://i.imgur.com/CUrdNwFh.jpg

The pistol is nice, but that stand is pretty interesting.

Axlnut
9 December 2016, 22:41
The pistol is nice, but that stand is pretty interesting.

Best thing about the Podavach loaders and stands - they don't cost nearly what they look like they should.

UWone77
10 December 2016, 12:25
2305

mustangfreek
10 December 2016, 14:30
Thanks guys on the info!!

UWone77
13 December 2016, 20:33
2331

Pyzik
14 December 2016, 04:34
2331

[wow]
So hot.

Dstrbdmedic167
14 December 2016, 17:27
2335

Pyzik
15 December 2016, 12:40
https://c1.staticflickr.com/1/709/31294806960_ca0f19bb49_b.jpg (https://flic.kr/p/PFq4Pf)
SMOS (https://flic.kr/p/PFq4Pf) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

mustangfreek
15 December 2016, 18:34
Looking good!!

Bugged Eric and got my Xmas/ bday present coming.. (Bday is 22nd) so no surprise on Xmas, although I told her I could wrap it and act surprised..lol

Going on top of the kitty lower

UWone77
17 December 2016, 12:47
2353

Jinxy
18 December 2016, 15:36
http://i1035.photobucket.com/albums/a439/Jinxy81/5EF63BB9-4BB7-4F99-9819-D15BD524A76D_zpssu2yidow.jpg

http://i1035.photobucket.com/albums/a439/Jinxy81/76D7C284-FDCE-4DD0-B722-8242881F2991_zpsoy7ywpjd.jpg

http://i1035.photobucket.com/albums/a439/Jinxy81/1B7843A6-55D1-482D-B544-085C93DE5A84_zps47a55iy6.jpg

Some iPhone pics. More on my IG account @ky_ar_1911

SMOS and Eric are great people to deal with. Building a 12.5 mid length next!

UWone77
20 December 2016, 20:34
2383

GOST
20 December 2016, 20:46
Nice pic, are pins pulled?

UWone77
20 December 2016, 20:52
Nice pic, are pins pulled?

Mashed in with a hammer. Cerakote added too much. This gun is a bitch to pull apart.

GOST
20 December 2016, 20:54
The first one I had Cerakoted was that way also. Changed painters, the new guy does a good job. The only place he has gotten out of spec is the hole for the selector detent on the last rifle.

UWone77
21 December 2016, 19:48
The first one I had Cerakoted was that way also. Changed painters, the new guy does a good job. The only place he has gotten out of spec is the hole for the selector detent on the last rifle.

I've got the second patriot brown set ready to SBR, but I need to throw a parts kit in it to make sure it's not suffering from the same specs. The clear anodized set I have the pins are easy. Wish they were all like that.

fledge
21 December 2016, 20:13
I've not had a cerakote job that didn't need a little finessing or a little sanding to get all the parts in and smooth. BDL's was the most elaborate paint I've had and required the most work on install.

Jinxy
22 December 2016, 11:18
I've got the second patriot brown set ready to SBR, but I need to throw a parts kit in it to make sure it's not suffering from the same specs. The clear anodized set I have the pins are easy. Wish they were all like that.

My Pat Brown set was SUPER tight with the SMOS pins, I slowly pecked them in/pulled them out with some lube and they have loosened up a bit.

inthegame
22 December 2016, 13:06
Any word on their uppers with forward assist? They posted a pic of one 5 weeks ago.

Jinxy
22 December 2016, 19:24
Any word on their uppers with forward assist? They posted a pic of one 5 weeks ago.

I have one coming any day now with a 12" quad and 12.5 barrel. Give them a call, they will get you set up.

UWone77
23 December 2016, 18:17
Any word on their uppers with forward assist? They posted a pic of one 5 weeks ago.

Just spoke to Eric on the phone.

They haven't had time to post pictures of the FA Uppers. If you want to purchase one, give the shop a call and they'll take care of you. Also available in several cerakote colors.

inthegame
23 December 2016, 19:09
You know what the price is? Is there a wevo discount? I'll have to wait until Tuesday to give them a call.

UWone77
23 December 2016, 19:33
You know what the price is? Is there a wevo discount? I'll have to wait until Tuesday to give them a call.

I don't know what the price is, but yes, on-going WEVO discount for basically everything they manufacture there for us. Just mention you are a member.

UWone77
30 December 2016, 19:37
Upcoming SMOS SBR. Probably won't work on it much for another year though.

2436

Das Jared
1 January 2017, 11:18
http://uploads.tapatalk-cdn.com/20170101/098e4bf06d91f5d4fb0a31ed71107264.jpg

Sent from my SM-G900P using Tapatalk

Das Jared
3 January 2017, 13:38
http://uploads.tapatalk-cdn.com/20170103/c0cb7353df628e7ba93d2984446b8a7c.jpg

Sent from my SM-G900P using Tapatalk

UWone77
5 January 2017, 05:39
2474

GOST
5 January 2017, 06:31
Do you like the KAC thumb thing?