What knife do you carry?

[Vesticles]

I was carrying a Kershaw Skyline for a while, but now I carry a ZT 0300 I recently acquired from the ARFcom EE. Once I got it I immediately took it to Panchetta Knife & Pen to have it sharpened, now this sucker is razor sharp

http://i220.photobucket.com/albums/dd1/Vesticles/IMG_20140916_070001_917_zps2wkkxe9i.jpg (http://s220.photobucket.com/user/Vesticles/media/IMG_20140916_070001_917_zps2wkkxe9i.jpg.html)

[Pyzik]

Have been rotating these 3 around lately.

Kershaw 2.75" Cryo
Kershaw 3" Swerve
Kershaw 3.5" RJ I

http://i1310.photobucket.com/albums/s643/Lopann06/KershawGroup1_zps5a674377.jpg

Probably like the RJ I the best, its the quickest open and the G10 grips are the most grippy. The Cryo has the nicest feel, and the Swerve is easily the sharpest out of the three. So guess I'll have to keep carrying them all until I decide on one.

That Cryo looks like it just might fill that hole in my soul until I can get the 566...
Amazon has it for <$40

[velocity2006]

Cryo is on Midway under 20 bucks. Good deal considering quality of the knife.
http://www.midwayusa.com/product/726297/kershaw-cryo-folding-tactical-knife-275-modified-drop-point-8cr13mov-stainless-steel-blade-aluminum-handle-gray?cm_vc=ProductFinding

There are a few different configurations though if your wanting a cryo with a larger blade.

[Pyzik]

Cryo is on Midway under 20 bucks. Good deal considering quality of the knife.
http://www.midwayusa.com/product/726297/kershaw-cryo-folding-tactical-knife-275-modified-drop-point-8cr13mov-stainless-steel-blade-aluminum-handle-gray?cm_vc=ProductFinding

There are a few different configurations though if your wanting a cryo with a larger blade.

Whoa, nice catch! Just added it to the cart. Free shipping over $25 too.

[velocity2006]

Yeah, there are other models available very cheap also, not sure if these got discontinued or something but a ton of the Kershaw stuff was on clearance.

[MechMan82]

I carry a Zero Tolerance 0300BW. I love it.
http://img.tapatalk.com/d/13/07/26/3uza6age.jpg

[Reaper277]

I carry the big chinese spyderco.
It's been a good knife for the price, I will prob would not buy it again.

[Computalotapus]

General yard work, backpacking, camping, hiking I carry my DMO Brute. Can not wait to get my DMO CHUB in October for an EDC fixed blade

http://www.computalotapus.com/images/dmobrute.jpg

[srvctec]

I'm new here and will probably get laughed right off this forum for my knives, but here is my current EDC combo.

http://img.tapatalk.com/d/14/09/26/amahe9ut.jpg

Boker Automat Kalishnikov 74 and a Victirinox. I've carried a knife in my pocket daily since I was 7 or 8 when one of my uncles gave me my first pocket knife from his collection- that was over 40 years ago. I'd love to have a ZT or Grayman, but can't seem to ever afford anything like those.

[srvctec]

Well, I just tried posting a photo of my EDC knives but it didn't post (maybe because I'm new here?). Currently, my 2 are a small Victorinox and a Boker Automat Kalishnikov 74.

[velocity2006]

They posted, nothing wrong with a Boker, and I am sure everyones had a Swiss Army Knife in one form or another.

[srvctec]

They posted, nothing wrong with a Boker, and I am sure everyones had a Swiss Army Knife in one form or another.

Hmmm, weird. Posted the original and tried to edit my post and it said there was no post to edit. Must be gremlins or something.

[875fps]

That Cryo looks like it just might fill that hole in my soul until I can get the 566...
Amazon has it for <$40

The Cryo 2 is a great inexpensive alternative to the ZT0566. They're both stainless steel frames (on the lock side, anyway) and assisted. The main difference between the two is the blade steel is much better on the ZT.

Here's a shot of my Cryo 2 tanto with the blackwash finish:

https://farm4.staticflickr.com/3931/15219610260_8442044371_o.jpg (https://flic.kr/p/pbUtTs)
by eightsevenfivefps (https://www.flickr.com/people/117807008@N03/), on Flickr

[875fps]

And since this thread is about guns and knives here's another one I took the other day:

https://farm4.staticflickr.com/3930/15395345961_6d85b55ca4_o.jpg (https://flic.kr/p/psraZk)
by eightsevenfivefps (https://www.flickr.com/people/117807008@N03/), on Flickr

[Computalotapus]

Just picked up a Kershaw Cryo 2 from BladeHQ decent deal @ roughly $36 to include shipping

[GOST]

The Cryo 2 is a great inexpensive alternative to the ZT0566. They're both stainless steel frames (on the lock side, anyway) and assisted. The main difference between the two is the blade steel is much better on the ZT.

Here's a shot of my Cryo 2 tanto with the blackwash finish:

https://farm4.staticflickr.com/3931/15219610260_8442044371_o.jpg (https://flic.kr/p/pbUtTs)
by eightsevenfivefps (https://www.flickr.com/people/117807008@N03/), on Flickr

What watch is that?

[Ride4frnt]

What watch is that?

Looks like a pebble

[JustinD83]

Zero tolerance 300

[partsguy]

http://tapatalk.imageshack.com/v2/14/10/03/088fd5b4c1f472c937b8632a69a1c603.jpg

[875fps]

What watch is that?


Looks like a pebble

Yup ... it's a Pebble. I've had it for all of about a week and absolutely love it.

[GOST]

Not a bad priced watch. I ussually don't wear a watch though.

[stihl2much4u]

Love this thing. Its taken a wicked beating http://surviveusa.biz/images/Products%20July%2021%20119.JPG

[stihl2much4u]

love this thing! Its taken a wicked beating http://surviveusa.biz/images/Products%20July%2021%20119.JPG

[harm]

http://tapatalk.imageshack.com/v2/14/10/04/f7e9e3397c14839c1ae5050139290b9b.jpg

Been carrying the ZT 0300st for almost 3 years now. The HK is new, only carrying for about 8 months.

[SGT.G]

I carry a SOG trident everyday in and out of uniform. It is a replacement to my Ontario xd deployment knife I had and was stolen (was my favorite knife) and is not replaceable :( the sog has great features, assist open, lock to prevent accidentally opening, good steel, light enough to carry comfortable but heavy enough to use.. the only thing I don't like is that the pocket clip is limited to two positionshttp://tapatalk.imageshack.com/v2/14/10/12/e51b60bbbf4efff213513ee266ae24f7.jpg

[Computalotapus]

DMO Knives CHUB for horizontal carry on the belt and Kershaw Cryo II for the pocket. The Cryo II is an outstanding pocket knife for under $30. Its a Hinder design for crying out loud for under $30.

http://www.computalotapus.com/images/edcblades.jpg

[DutyUse]

Comp you have good taste in blades!

[harm]

I've never complimented another man on his Chub... But that's nice.

[RomeoTango]

http://tapatalk.imageshack.com/v2/14/10/13/b2f28d976ffadffb86d156281414979b.jpg

I rock the Ka-bar in ky edc. The sog is alright, but it got magnetized. Also run an rmj no bother. It works perfectly for skinning wire and stuff.

[CLBME]

Oh man I had to quote....................that is funny. I carry an Emerson horseman everyday. Functional and tough.


I've never complimented another man on his Chub... But that's nice.

[JTS-M1A]

My EDC knives are Spyderco Endura spyderedge, Kershaw Blur & Kuro, CRKT Liftoff. When I go out to walk my dog at night I carry my Sog Tsunami.
I live in kalifornistan so getting a CCW is not going to happen any time soon.

[mustangfreek]

DMO Knives CHUB for horizontal carry on the belt and Kershaw Cryo II for the pocket. The Cryo II is an outstanding pocket knife for under $30. Its a Hinder design for crying out loud for under $30.

http://www.computalotapus.com/images/edcblades.jpg

Nice chub ...[:D]

I have a cryo and a few other kershaws that are excellent for day to day stuff..

[DOM MARE]

unfortunatly due to the nature of my work i pass through customs in placs with too much dust and hot weather where custom clerks confiscate what ever is shine and scream tactical....so i usualy carry 15$ worth folding knive that will do the job for some months or so until they are stole confiscated gifted etc...

[Onyxhammer]

I recently acquired a Dalibor and I absolutely love it. I sadly don't have any pictures of the one I just got but I have pictures of my friends and mine is nearly identical.

http://i.imgur.com/tzRW1yn.jpg
http://i.imgur.com/jwJuWCh.jpg

I love absolutely everything about Dalibor knives. The only problem, good luck getting one. I waited well over a year on his 'notify' list before I could get mine ordered. They are also extremely expensive but I've seen 3 of his knives endure an absolute beating and never give up.

http://instagram.com/daliborbergamknives
Here are some pictures he's got of some of the things he builds.

[voodoo_man]

http://i.imgur.com/yntQ4kd.jpg

[Computalotapus]

I recently acquired a Dalibor and I absolutely love it. I sadly don't have any pictures of the one I just got but I have pictures of my friends and mine is nearly identical.

http://i.imgur.com/tzRW1yn.jpg
http://i.imgur.com/jwJuWCh.jpg

I love absolutely everything about Dalibor knives. The only problem, good luck getting one. I waited well over a year on his 'notify' list before I could get mine ordered. They are also extremely expensive but I've seen 3 of his knives endure an absolute beating and never give up.

http://instagram.com/daliborbergamknives
Here are some pictures he's got of some of the things he builds.

I follow him on IG as well. His folders look very nice. I think after I get a grayman duo I will pick up one of Dalibor's folders as well.

[MonkeyBomb]

Knives are another thing I have a thing for.

For folders I tend to carry Benchmades. The Axis locks are great. I have been fielding a Barrage for a few months now and that's a nice little-big knife. I prefer a plain blade with a clip point. They are easier for me to sharpen. BM has a pretty good reputation for customer service and a lifetime warranty.


For fixed blades I tend to bounce between Scrapyard and Swamp Rat blades. My all time favorite user mid sized is the Scrapyard 7-11. Smaller fixed blades the 4-11 and the HRLM are favorites though very different knives.

I chose these two sister companies because they have a bomb proof warranty. But you probably won't need it. If you screw it up they will fix or replace it. Dan Busse runs the yard. They aren't made for looks but they darned sure perform. Jerry Busse runs the Swamprat line even though its in his wifes name. Its the bridge between the yard and the Busse line.

Give me a little slack on the photos. I'm not Stickman.

Here is a SYKCO 4-11 next to BM 300

http://i198.photobucket.com/albums/aa315/Stemshot/ed353e62-a189-4377-8c45-c67d1e07c50d_zps9e3408ea.jpg

Here is the 7-11 next to the HRLM before I beat the snot out of the 7-11

http://i198.photobucket.com/albums/aa315/Stemshot/IMGP0090-1.jpg

[shutmdown]

kershaw blur serrated with a glassbreaker tip. (not sure if thats the proper term for it)

http://kershaw.kaiusaltd.com/images/uploads/products/1046/1670gbblkst_profile_1020x400.png

[shutmdown]

kershaw blur serrated with a glassbreaker tip for edc
http://kershaw.kaiusaltd.com/images/uploads/products/1046/1670gbblkst_profile_1020x400.png

[RaceBannon42]

Today I'm carrying a Emerson Multitakser EDC2 http://img.photobucket.com/albums/v234/RaceBannon42/IMG_20150429_1338032_zpsaupsz0xa.jpg

[voodoo_man]

http://i.imgur.com/me8Ov7v.jpg

[Joelski]

SnG GG

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150504_152537.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150504_152537.jpg.html)

[UWone77]

http://i1016.photobucket.com/albums/af282/richdkim77/IMG_3417_zpsa0sci7kl.jpg (http://s1016.photobucket.com/user/richdkim77/media/IMG_3417_zpsa0sci7kl.jpg.html)

[srvctec]

http://images.tapatalk-cdn.com/15/05/08/5af80d9ea8c16c250bd92b03c3fa6fdf.jpg

http://images.tapatalk-cdn.com/15/05/08/8ccb690aa7debe7d134fd3046d2402c3.jpg

[Cotton68spc]

http://images.tapatalk-cdn.com/15/05/11/5a844b003084d870e7f7b1cee471dac3.jpg

ZT0561 love this knife


Check me out on YouTube and Facebook

[Dstrbdmedic167]

Boker Anti-MC! Titanium frame with a ceramic blade makes it stupid light and its a Boker so its Sharp as hell and has held up very well so far!

http://i1291.photobucket.com/albums/b548/Dstrbdmedic167/Boker%20Anti-MC%20BampW_zpsupvlrxz9.jpg

[GOST]

I've never had a chance to mess with any Boker knives but that's a nice looking piece.

[alamo5000]

I obviously carry DPX. I have more friggin knives than I know what to do with LOL

I don't have this one yet, but here is the one I want. It's a Lionsteel TiSpine

https://www.lionsteel.it/n/files/PEL5g0/ts1_gs.jpg

You can get the handles in a variety of colors, and you can get the blade in Damascus steel also...

http://i.imgur.com/o9Uulx8.jpg

I've been oogling over that knife for several years now...

[Cotton68spc]

That Damascus is sick


Check me out on YouTube and Facebook

[Dstrbdmedic167]

I've never had a chance to mess with any Boker knives but that's a nice looking piece.

This is my first but it won't be my last.

[RaceBannon42]

http://img.photobucket.com/albums/v234/RaceBannon42/zt_zpselyc1rjs.jpg
My normal edc ZT566

[GOST]

How do you like the 566?

[Computalotapus]

My normal edc ZT566

Man I really like the Rick Hinderer designed knives.

[six8]

http://images.tapatalk-cdn.com/15/05/13/7e6a971d8683937ccd21013ef7c593d5.jpg

[RaceBannon42]

How do you like the 566?
I love it. It been a great knife for me. Very solid. It hasn't been subjected to any rough use, but I'm sure it would stand up well.

[GOST]

I've been considering either a ZT566 or a Benchmade Nakamura.

[DutyUse]

I've been considering either a ZT566 or a Benchmade Nakamura.

Go for it! I carry tiger stripe zt or Kershaw blur most days but both blades u mentioned are on my list


Sent from my iPad using Tapatalk

[shutmdown]

This is my first but it won't be my last.

seriously, that is one beautiful knife. I have a tendency to drop knives (butterfingers). and my kershaw dropped right on the point and now its got a dull point. Hows the strength on that blade?

[Dstrbdmedic167]

seriously, that is one beautiful knife. I have a tendency to drop knives (butterfingers). and my kershaw dropped right on the point and now its got a dull point. Hows the strength on that blade?

So far it's held up well. I've dropped it myself a couple times and no issues thus far. It really is a great knife.

[shutmdown]

So far it's held up well. I've dropped it myself a couple times and no issues thus far. It really is a great knife.

thanks appreciate the info

[voodoo_man]

http://i.imgur.com/6rDpNzN.jpg

[GOST]

Damascus is always sexy.

[cjd3]

http://images.tapatalk-cdn.com/15/05/13/7e6a971d8683937ccd21013ef7c593d5.jpg

Yeah, buying that now.

[schambers]

Been carrying this guy for a while now. Colonel Blade LowVZ 2.0

https://lh3.googleusercontent.com/edjOskA6Fa3YGnfBKr4eSqYIfSvhx7kt8E84n1D3iyQ=w1404-h877-no

Did a quick video about my impressions of it here:

http://www.youtube.com/watch?feature=player_detailpage&v=2UJWxoPZa14

[WarEagle]

My Current EDC is a Les George Talos Monkey Edge Edition.

https://c1.staticflickr.com/1/363/18433444559_03ccace492_b.jpg

[alamo5000]

https://scontent-atl1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/11401186_922935841085288_3096265000804282021_n.jpg ?oh=693068a42fedfdf6278a326f0273f3fc&oe=55EA8A82

[alamo5000]

HEST mini (left). Not to be confused with the heat. Regular HEST (right)

https://scontent-atl1-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/q91/s720x720/10348174_922563927789146_4489694869759947691_n.jpg ?oh=56841387366eac2989555bc0bacc3f1b&oe=55EE7F93

[sgatangosix]

My current rotation. ZT 560, Benchmade grip with a Doug Ritter blade, and Microtech ultratechhttp://images.tapatalk-cdn.com/15/07/16/5dfa6184334b3c65cf0c2974580e58ed.jpg

Sent from my SCH-I545 using Tapatalk

[voodoo_man]

http://i.imgur.com/Zwoou09.jpg

[voodoo_man]

http://i.imgur.com/XUd7hMe.jpg

[Joelski]

Strider/DDC SMF

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/DDC%20SMF/DSC00578.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/DDC%20SMF/DSC00578.jpg.html)

[Former11B]

To those of you who carry a fixed blade: Where/how do you carry it? Open/concealed? Waistband? I carry a couple different folders (not at the same time) but am thinking about a fixed blade but not sure how I'd best carry it.

[voodoo_man]

To those of you who carry a fixed blade: Where/how do you carry it? Open/concealed? Waistband? I carry a couple different folders (not at the same time) but am thinking about a fixed blade but not sure how I'd best carry it.

Iwb samurai style.

[Josh S.]

To those of you who carry a fixed blade: Where/how do you carry it? Open/concealed? Waistband? I carry a couple different folders (not at the same time) but am thinking about a fixed blade but not sure how I'd best carry it.

I carry a Spartan Enyo around my neck pretty much everywhere I go. I also carry a Benchmade AFO-II as my EDC and only carry the Enyo for self-defense. I'm only 20 so I still have almost a year before I can start carrying a handgun, so it's nice to at least have something for protection. When I first got it, I tried IWB carry for everyday use and I REALLY wanted to like it, but I just couldn't get used to it. Especially when I would sit down for a period of time it would dig into my side and was just uncomfortable as hell. I think I might get someone to make me an outside the waistband Kydex sheath so I can use it for work. All in all, the Enyo is a very nice, little knife and if you do get a fixed blade I would highly recommend it.

[Jumpmaster]

Bastinelli BBR2 edc knife.

[DutyUse]

http://images.tapatalk-cdn.com/15/10/03/a110f0e35f89283203bc4e795fbedd3d.jpg

http://images.tapatalk-cdn.com/15/10/03/ad63ced8f435bbec052b84092c809314.jpg

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20Tanto%20Grind%20SMF%20Lego/20150519_094849.jpg~original (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20Tanto%20Grind%20SMF%20Lego/20150519_094849.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20Tanto%20Grind%20SMF%20Lego/IMG_20150820_083723-1.jpg~original (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20Tanto%20Grind%20SMF%20Lego/IMG_20150820_083723-1.jpg.html)

[Joelski]

http://i.imgur.com/XUd7hMe.jpg

Sweet blade!

[DutyUse]

I've been using the Cold Steel a lot lately for edc tasks

http://images.tapatalk-cdn.com/15/10/03/5f379a59cc4991715d1ab3166a7d2586.jpg

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150312_131412_edit_1426180974502_1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150312_131412_edit_1426180974502_1.jpg.html)


http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20Zwear/20141104_160210.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20Zwear/20141104_160210.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0301/20140707_113641_HDR.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0301/20140707_113641_HDR.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0566/20150228_135659.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0566/20150228_135659.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0561/20141123_111336_HDR.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0561/20141123_111336_HDR.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0300/20150612_005122.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0300/20150612_005122.jpg.html)
http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0551/20141116_184455.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0551/20141116_184455.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Hultafors%20hand%20axe/2013-08-22133413.png (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Hultafors%20hand%20axe/2013-08-22133413.png.html)


http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/ESEE%20Knives/Model%205%20and%206/20130416_225938-1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/ESEE%20Knives/Model%205%20and%206/20130416_225938-1.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/20140928_004659.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/20140928_004659.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/IMG_20140901_22502401.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/IMG_20140901_22502401.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/20130913_001902-1-1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/20130913_001902-1-1.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/2013-05-20062743.png (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/2013-05-20062743.png.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/DPX%20Gear/Mr%20HEST/20150224_092539.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/DPX%20Gear/Mr%20HEST/20150224_092539.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/DPX%20Gear/HEST%20T3%20Triple%20Black/20140513_162436.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/DPX%20Gear/HEST%20T3%20Triple%20Black/20140513_162436.jpg.html)

[DutyUse]

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150312_131412_edit_1426180974502_1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20GG/20150312_131412_edit_1426180974502_1.jpg.html)


http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20Zwear/20141104_160210.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Strider%20Knives/Strider%20SnG%20Zwear/20141104_160210.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0301/20140707_113641_HDR.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0301/20140707_113641_HDR.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0566/20150228_135659.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0566/20150228_135659.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0561/20141123_111336_HDR.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0561/20141123_111336_HDR.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0300/20150612_005122.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0300/20150612_005122.jpg.html)
http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Zero%20Tolerance/0551/20141116_184455.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Zero%20Tolerance/0551/20141116_184455.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Hultafors%20hand%20axe/2013-08-22133413.png (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Hultafors%20hand%20axe/2013-08-22133413.png.html)


http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/ESEE%20Knives/Model%205%20and%206/20130416_225938-1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/ESEE%20Knives/Model%205%20and%206/20130416_225938-1.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/20140928_004659.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/20140928_004659.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/IMG_20140901_22502401.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/IMG_20140901_22502401.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/20130913_001902-1-1.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/20130913_001902-1-1.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/Benchmade%20Knives/2013-05-20062743.png (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/Benchmade%20Knives/2013-05-20062743.png.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/DPX%20Gear/Mr%20HEST/20150224_092539.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/DPX%20Gear/Mr%20HEST/20150224_092539.jpg.html)

http://i997.photobucket.com/albums/af93/Joelski144/Guns%20and%20Knives/DPX%20Gear/HEST%20T3%20Triple%20Black/20140513_162436.jpg (http://s997.photobucket.com/user/Joelski144/media/Guns%20and%20Knives/DPX%20Gear/HEST%20T3%20Triple%20Black/20140513_162436.jpg.html)

Nice photo bomb! Super nice collection.

[Joelski]

Thanks! Don't ask about guitars. They take up 1/4 of the interwebz. :D

[voodoo_man]

http://i.imgur.com/5tm5W7h.jpg (http://www.vdmsr.com/2016/09/g10-sharp-metal-rubber-and-precision.html)

[Joelski]

Buck Vantage Force Pro. S30V snob steel, heat treated by Paul Bos. Quite possibly one of the best value knives out there.

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Buck%20Knives/20141112_193132.jpg~original

[UDT]

http://i.imgur.com/5tm5W7h.jpg (http://www.vdmsr.com/2016/09/g10-sharp-metal-rubber-and-precision.html)

What knife is this? TIA

[voodoo_man]

What knife is this? TIA

warriors way / head hunter blades RAT blade

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Strider%20Knives/20161001_233217-1.jpg~original

[Stone]

[:D]1780
1781
1782

[voodoo_man]

What's the little tool for?

[Joelski]

Looks like a fire steel.

[FortTom]

2061

I think with the WEVO emblems, this is a one of a kind. This is a knife I won in a raffle that WEVO members akersc and Compulatopus ran for veterans causes. It's from a company called Dead Moose Ops, and is known as their Breacher model. Dead Moose Ops added the WEVO emblem on both sides, and shipped it with a Teklok Kydex sheath. So with all the color options and the WEVO logo, unless Comp and Akersc ordered one like it for themselves, I believe it's unique. As much as Comp and Dead Moose Ops implored me to treat it as an "ordinary" knife and use the hell out of it, I couldn't bring myself to do it, especially one as expensive as this one (I usually don't buy really expensive knives) and even though DMO offered to cerakote the Logo and and touch up the blade whenever I wanted it, I still didn't. I think I will, next year. So though the thread was titled "EDC" knife, I had to be honest and point out it wasn't. Anyway, didn't know if any WEVO members remembered this one or could appreciate it.

FT[:D]

[Dstrbdmedic167]

Yep I remember that raffle, Miss having those guys around all the time. I still text Comp from time to time. Loved that knife!

[Dstrbdmedic167]

I'll share my EDC for amost 2 years now. The Boker Plus Anti-Mc. This was also one of the fist shots I ever took.

2067

[SINNER]

2061

I think with the WEVO emblems, this is a one of a kind. This is a knife I won in a raffle that WEVO members akersc and Compulatopus ran for veterans causes. It's from a company called Dead Moose Ops, and is known as their Breacher model. Dead Moose Ops added the WEVO emblem on both sides, and shipped it with a Teklok Kydex sheath. So with all the color options and the WEVO logo, unless Comp and Akersc ordered one like it for themselves, I believe it's unique. As much as Comp and Dead Moose Ops implored me to treat it as an "ordinary" knife and use the hell out of it, I couldn't bring myself to do it, especially one as expensive as this one (I usually don't buy really expensive knives) and even though DMO offered to powder coat the Logo and and touch up the blade whenever I wanted it, I still didn't. I think I will, next year. So though the thread was titled "EDC" knife, I had to be honest and point out it wasn't. Anyway, didn't know if any WEVO members remembered this one or could appreciate it.

FT[:D]

Logo or not, that knife is bad ass.

[FortTom]

Logo or not, that knife is bad ass.
Thanks, I think so too. I was lucky as hell to win it. I never spend that kind of money on a knife, basically due to my propensity to either lose it (which is most of the time), or break it. Almost crapped my pants when Comp and Akersc announced I won it![:D]

[voodoo_man]

http://i.imgur.com/EPGikB7h.jpg (http://www.vdmsr.com/2016/11/three-musketeers.html)

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Emerson%20OBS/20150404_212835.jpg~original

[GOST]

2342
ZT 0566BW was bought as a return from a shop for $80. Only bought it because it was cheap, but have come to love this knife. It carries very well for it's size, and makes one hell of a screw driver. It even reviews my daughter's school work. I've absolutely abused this knife and it show very little wear. Only complaint is that the thumb studs are useless.

[Joelski]

They aren't thumb studs, they're blade stops. It adds strength on frame lock folders.

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/0566/20150307_215132_edit_1425985365570.jpg (http://s997.photobucket.com/user/Joelski144/media/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/0566/20150307_215132_edit_1425985365570.jpg.html)

[GOST]

They aren't thumb studs, they're blade stops. It adds strength on frame lock folders.


Good to know, I thought that was what a lock bar stabilizer was for? Mines an older one and it calls those thumb studs in it's manual.

[SINNER]

Def thumb studs on mine. They are a few hundredths away from even touching the frame when it's open.

[Slippers]

My favorite. Too bad NC knife laws are a remnant from the Jim Crow laws, much like the pistol purchase permit system that is still in place, so I can't carry it unless it's openly visible.

http://i.imgur.com/3BDN1col.jpg

[Joelski]

It's a misnomer a lot of makers use. You'll see them on pretty much every framelock. Along with a flipper, or thumb hole. Chris Reeve Knives do use them. As for clearance, not likely if you apply some pressure. The little blade stop pin is the only other thing keeping the blade from collapsing backwards. You also wouldn't see steel liners on benchmade's lock if it didn't employ those pins for strength.

[Joelski]

Good to know, I thought that was what a lock bar stabilizer was for? Mines an older one and it calls those thumb studs in it's manual.
It's okay on the 0566 because the scale and liners are stainless steel. Check the newer ZT Ti framelocks; they have steel inserts on the lock bar. Carbidizing is also a less common solution to lockbar wear.

[Joelski]

I miss the "overbuilt" ZT's. They were just right IMO.

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/20140328_18131_edit_1396703970249.jpg (http://s997.photobucket.com/user/Joelski144/media/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/20140328_18131_edit_1396703970249.jpg.html)

[Pyzik]

My favorite. Too bad NC knife laws are a remnant from the Jim Crow laws, much like the pistol purchase permit system that is still in place, so I can't carry it unless it's openly visible.

http://i.imgur.com/3BDN1col.jpg
Sounds just like Michigan.

Sent from my SM-G930V using Tapatalk

[Jerry R]

A very old, discontinued, AL Mar ultralight - 1.25 oz. I don't use the sheath that came with it.
https://c1.staticflickr.com/1/716/31541567712_da5d7a421e_o.jpg (https://flic.kr/p/Q4dMbY)IMG_2254 Al Mar Ultra-Light (https://flic.kr/p/Q4dMbY) by Jerry R (https://www.flickr.com/photos/9663868@N05/), on Flickr

[Joelski]

My favorite. Too bad NC knife laws are a remnant from the Jim Crow laws, much like the pistol purchase permit system that is still in place, so I can't carry it unless it's openly visible.

http://i.imgur.com/3BDN1col.jpg
Love the Winkler belt knives!

[Stone]

2346
2347
2348

[Joelski]

Adanas day.

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Gerber%20Knives/20130821_214846-1.jpg~original

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Benchmade%20Knives/20140928_004659.jpg~original

[voodoo_man]

http://i.imgur.com/DMr2qAd.png (http://www.vdmsr.com/2017/03/must-haves.html)

[JMJ]

4096
4097
4098
For edc I usually alternate between one of the two esee laserstrikes iwb at 3:00 or the Benchmade Adamas rear right front pocket.

4099
The Junglas rides in my backpack during the summer for work since I spend more time on foot in swamps and marsh.

[JMJ]

4100
4101
Tops MSK always rides around my neck on a ball chain.

[ChattanoogaPhil]

Buck 505. Had it for 15 or 20 years I guess.

http://i.imgur.com/Mm6nZiu.jpg

Every now and they I'll drag it though the WorkSharp.

http://i.imgur.com/VRMpvHs.jpg

[JMJ]

4102
4104

Esee 5 with the pouch kit replaces the Junglas in my backpack outside of summer time for work. It's also my most used fire prep knife which is the reason for it's evolution from coated to stripped and patina'd.


Needless to say I'm a little bit of a knife nerd and I don't take it easy on'em!

[JMJ]

Buck 505. Had it for 15 or 20 years I guess.

http://i.imgur.com/Mm6nZiu.jpg

Every now and they I'll drag it though the WorkSharp.

http://i.imgur.com/VRMpvHs.jpg

I love those little Buck 505's! My dad has carried one of them daily for over 30 years.

[Joelski]

4102
4104

Esee 5 with the pouch kit replaces the Junglas in my backpack outside of summer time for work. It's also my most used fire prep knife which is the reason for it's evolution from coated to stripped and patina'd.


Needless to say I'm a little bit of a knife nerd and I don't take it easy on'em!

Nice! A feather stick with a 1/4" thick blade. That's about a badass sharpening job ya got on there, brother! Makes me want another 5! I gotta get another Junglas too!

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/20180120_115932_001_zpshcs3sfnw.jpg~original

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Hinderer%20XM%2018%203-5%20Fatty%20Harpoon%20Tanto/20180129_162826_zpsl1l8xjqr.jpg~original

[kalopsia]

4096


Where is that Laserstrike scale from? Great looking design.



Sent from my iPhone using Tapatalk Pro

[Joelski]

Where is that Laserstrike scale from? Great looking design.



Sent from my iPhone using Tapatalk ProI believe John carved it himself.

[JMJ]

Nice! A feather stick with a 1/4" thick blade. That's about a badass sharpening job ya got on there, brother! Makes me want another 5! I gotta get another Junglas too!

Brother I've more than amazed myself with this 5! I put some time in thinning the edge bevel a good bit, then convexed it stropping with sandpaper on a mousepad going from 80, 120, 320, 400 then 800 grit then went on a ceramic crock stick set at 20* then 25* to put a micro bevel back on the edge. It's been a really fun blade to play with.

I sold all my Esee's except the two Laserstrikes, this 5 and a Junglas.

I totally missed you getting the second Hinderer on the other forum!!!!

[JMJ]

Where is that Laserstrike scale from? Great looking design.



Sent from my iPhone using Tapatalk Pro



A very close friend filed those scales by hand then gifted me that Laserstrike. He goes by Emac on the Esee forum, he'll do scale mods and make scales from wood blanks also.


Joel I wish the few I've filed came out that good!

[Joelski]

The more I hear, or read about emac, the more I think you two are the same person. I didn't think I knew two people that would fish a tree trunk out of the bayou, but that was his story, not yours! That's a great friend to have!

[JMJ]

The more I hear, or read about emac, the more I think you two are the same person. I didn't think I knew two people that would fish a tree trunk out of the bayou, but that was his story, not yours! That's a great friend to have!

Hahahaha! Yeah I would've left that tree trunk right where it was, he's trying to get my big ass to go lift that damn behemoth. He's still got that new to living in south Louisiana excitement going. We were roommates for a few years when I was in college in Arkansas, spend a lot of time hunting, shooting and burning shit down.

[JMJ]

5134
5135

Freshly back from Benchmade. Had the combo edge blade replaced with the plain edge for $40, they all replaced everything except the scales and liners for free while it was there. I'm very happy with their customer service and didn't know they offered blade replacement until a few weeks before I sent it off. I bought this Adamas heavily used from a friend for $100, so I've basically got a brand new Adamas for $140 vs $200-250.

[FortTom]

Cool knife, and story about Benchmade. I had no idea anyone would do that!. Also cool is that cup. Do you mind if I ask where you got that?

FT[:D]

[JMJ]

Thanks!

It's just a 20oz Yeti tumbler with a sticker I put on it from another forum I'm a member of. They sent each of the members one on the first anniversary of the forum.

[FortTom]

Thanks!

It's just a 20oz Yeti tumbler with a sticker I put on it from another forum I'm a member of. They sent each of the members one on the first anniversary of the forum.

Bummer, I wanted one...[adore]

FT[:D]

[SINNER]

5134
5135

Freshly back from Benchmade. Had the combo edge blade replaced with the plain edge for $40, they all replaced everything except the scales and liners for free while it was there. I'm very happy with their customer service and didn't know they offered blade replacement until a few weeks before I sent it off. I bought this Adamas heavily used from a friend for $100, so I've basically got a brand new Adamas for $140 vs $200-250.

How long did they take to turn it around? I just sent in a few and their latest email said 5 weeks. Used to be really fast, like a week and it was on its way back.

[JMJ]

I think it took 4 weeks. I didn't get a shipment notice when it was sent back to me, so I came back from vacation with it sitting on my desk at work.

[JMJ]

Sorry definitely nothing special, just had some stickers with nothing cool to do with them. Here's the other side of the same yeti tumbler. 5144 with my neck knife.

[Joelski]

Man, I need another Adamas!

This little gem showed up today. I've been searching for one for 5 years. Never thought I'd get one in this shape!

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/20180604_164904_zpswhpqdmub.jpg~original

[srvctec]

These are on me daily.https://uploads.tapatalk-cdn.com/20180604/40b34c6df0d6964de62e03e51f1c6387.jpg

[ChattanoogaPhil]

5433

[JMJ]

Man, I need another Adamas!

This little gem showed up today. I've been searching for one for 5 years. Never thought I'd get one in this shape!

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/20180604_164904_zpswhpqdmub.jpg~original

That's a sweet ZT!

[JMJ]

These are on me daily.https://uploads.tapatalk-cdn.com/20180604/40b34c6df0d6964de62e03e51f1c6387.jpg


Hey man, I thought I recognized that pic!

[srvctec]

Hey man, I thought I recognized that pic!Ha ha! Yep, when I saw yours, I thought "Hey, I "know" that guy!".

[JMJ]

How long did they take to turn it around? I just sent in a few and their latest email said 5 weeks. Used to be really fast, like a week and it was on its way back.

Did you get your knives back from benchmade, if so what was your service experience like?

[SINNER]

Did you get your knives back from benchmade, if so what was your service experience like?

IIRC they shipped them at the end of the the third week. All came back in perfect functioning order. They even threw in some Lube, stickers and extra belt clips for all 3 knives.

[Former11B]

I’ve been carrying my Esee Izula 2 for a while and I like it a lot

[ChattanoogaPhil]

Recently got my Buck 505 back from a friend in Wisconsin.
Reckon he still enjoys polishing.

https://i.imgur.com/oOPbTQt.png

[Joelski]

Recently got my Buck 505 back from a friend in Wisconsin.
Reckon he still enjoys polishing.

https://i.imgur.com/oOPbTQt.pngStropping puts me dead to sleep.

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/ESEE%20Knives/ColorampShine_zpsa3fff0a7.jpg (http://s997.photobucket.com/user/Joelski144/media/EDC%20Knives%20and%20modded%20blades/ESEE%20Knives/ColorampShine_zpsa3fff0a7.jpg.html)

[Joelski]

http://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/HEST%20T3%20Triple%20Black/20140513_162436_zps0ce9517f.jpg (http://s997.photobucket.com/user/Joelski144/media/EDC%20Knives%20and%20modded%20blades/HEST%20T3%20Triple%20Black/20140513_162436_zps0ce9517f.jpg.html)

[JMJ]

6036

[Joelski]

Is that considered a Scandi, of Sabre grind? Either way, its obstructing my ability to admire that Adamas. [:D]

[JMJ]

Is that considered a Scandi, of Sabre grind? Either way, its obstructing my ability to admire that Adamas. [:D]


TOPS considers it a scandi, but it’s really a saber grind. Damn sweet little knife, I wear it as a neck knife on a ball chain.

[JMJ]

Better?
6041

[FortTom]

JMJ, what is the smaller folder? It's sweet as hell, and I've been looking for something like that, especially without a serrated blade, as an EDC knife.

Thanks,

FT[:D]

Edit: Ooops! Not a folder, my bad, old eyeballs.[:D]

[JMJ]

JMJ, what is the smaller folder? It's sweet as hell, and I've been looking for something like that, especially without a serrated blade, as an EDC knife.

Thanks,

FT[:D]


Edit: Ooops! Not a folder, my bad, old eyeballs.[:D]

No problem! It’s a TOPS Knives MSK 2.5 (mini scandi knife). It’s not a true scandi grind blade though, it had the cutting edge at a wider angle for strength. I’ve carried it almost daily for two years on a ball chain as a neck knife and a few times with just it’s sheath in my pocket. It’s a super handy little blade. I’m probably odd that I prefer carrying fixed blades daily vs folders, the Adamas is the first folder I’ve actually liked and carried in years.
6042
6043

[JMJ]

6044

[srvctec]

My all-time favorite folder, carried every day since I got it a year or two ago.

https://uploads.tapatalk-cdn.com/20181204/fc5191a8327556aab365b3fd28121220.jpghttps://uploads.tapatalk-cdn.com/20181204/73fff4052771531b7ce907be3a5bed60.jpg

[Joelski]

Show 'em some love! If a knife never gets any mojo, did it get used?

https://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/0561/20140604_194827_zps7bee5ff7.jpg~original

[fledge]

Show 'em some love! If a knife never gets any mojo, did it get used?

https://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Zero%20Tolerance/0561/20140604_194827_zps7bee5ff7.jpg~original

That’s what I said of my Hinderer until I lost my Halftrack this summer. :(

[UWone77]

Trying out some of the Brous Blades at Rainier

6045

[JMJ]

My all-time favorite folder, carried every day since I got it a year or two ago.

https://uploads.tapatalk-cdn.com/20181204/fc5191a8327556aab365b3fd28121220.jpghttps://uploads.tapatalk-cdn.com/20181204/73fff4052771531b7ce907be3a5bed60.jpg

I got to fondle one of those last weekend a buddy from the other forum has. I like the blade design and the looks, but I think the thin section of the handle below the pivot is too skinny for my hands (I wear XXL Mechanix gloves). It’d definitely be on I’d consider getting if I feel the need for another folder.

[JMJ]

Trying out some of the Brous Blades at Rainier

6045

Those look beefy as hell!

[Eric]

The other day one of our new guys was asking about knives. I was reminded that my Leatherman ends up getting used more than anything else. Everybody needs at least one. An older Wave here. 6064

Sent from my ONEPLUS A6003 using Tapatalk

[FortTom]

Exactly the same thing here. Handiest thing on the planet. Has saved my butt many times.

FT;)

[JMJ]

The other day one of our new guys was asking about knives. I was reminded that my Leatherman ends up getting used more than anything else. Everybody needs at least one. An older Wave here. 6064

Sent from my ONEPLUS A6003 using Tapatalk


Exactly the same thing here. Handiest thing on the planet. Has saved my butt many times.

FT;)

Both of y’all are so right about that! I always carry either a Leatherman PST II or a Kick everyday I’m just bad about not including it with my knife pics.

[Jerry R]

I have Leatherman(s), but I like the Gerber too ... fits in the sheath's pouch.

http://www.weaponevolution.com/forum/attachment.php?attachmentid=5621&d=1532966434

[Joelski]

Rollin' old school with my MP 600 still. Oldie but a goodie and yes, handy as all get-out.

https://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Gerber%20Knives/20181210_170547_zpsufrvnebf.jpg~original

[JMJ]

Rollin' old school with my MP 600 still. Oldie but a goodie and yes, handy as all get-out.

https://i997.photobucket.com/albums/af93/Joelski144/EDC%20Knives%20and%20modded%20blades/Gerber%20Knives/20181210_170547_zpsufrvnebf.jpg~original

So classic! I’ve got a 1st gen model in my hunting pack.

[voodoo_man]

https://i.imgur.com/pSAK3uK.jpg (https://www.vdmsr.com/2018/12/amtacbladescom-northman.html)

[voodoo_man]

moar blades

https://i.imgur.com/hfNMQRH.jpg (https://www.vdmsr.com/2018/12/kryptos-dagger.html)

[ChattanoogaPhil]

https://i.imgur.com/Ymbiev8.png

[JMJ]

6075
6076
6077

Couple more from my rotation

[Joelski]

That bottom one is a great combination of blades. :thumbsup:

[srvctec]

My Benchmade Fact is still carried daily since I got it at the beginning of the year when it was released (I carry anywhere from 3 to 7 blades daily). Custom CF scales from Rogue Bladeworks.

https://uploads.tapatalk-cdn.com/20181214/d69fe7aa0a38c0202bdddeae3aa0621e.jpg

[voodoo_man]

https://i.imgur.com/uhwkquk.jpg (http://www.vdmsr.com/2018/12/the-rat-blade.html)

[JMJ]

https://i.imgur.com/uhwkquk.jpg (http://www.vdmsr.com/2018/12/the-rat-blade.html)

Sick looking blade! What’s the details on it?

[JMJ]

6082
old school and new school

[voodoo_man]

Sick looking blade! What’s the details on it?

That is a headhunterblades.com Rat Blade.

pic thread

https://i.imgur.com/YxbPzCU.jpg (https://www.vdmsr.com/2018/12/headhunterbladescom.html)

[voodoo_man]

https://i.imgur.com/tffVfLc.jpg (https://www.vdmsr.com/2019/01/amtacbladescom-northman.html)

[Aragorn]

That is a headhunterblades.com Rat Blade.

pic thread

https://i.imgur.com/YxbPzCU.jpg (https://www.vdmsr.com/2018/12/headhunterbladescom.html)

This is awesome. I love the contrast.

[JMJ]

6136

[Joelski]

Ti Tuesday carryoverhttps://uploads.tapatalk-cdn.com/20190109/9be18808f86c95893cf5b15b3ee9e66f.jpg

[frankenstienARshooter]

Here's my S&W Search & rescue I picked up at gunshow, nothing fancy but holds a good edge...
6167
And my Marlin lockbade that I bought at Ace Hardware three or four years ago, nothing fancy but holds a good edge & it easy to sharpen
6168
6169

[FortTom]

This is awesome. I love the contrast.

Damn Voodoo, those are some seriously hard core knifes, but you've been posting those for about five months. Show us some new stuff.

[:D]

[voodoo_man]

Damn Voodoo, those are some seriously hard core knifes, but you've been posting those for about five months. Show us some new stuff.

[:D]

When new stuff comes out there is worth showing I will.

Unlike some, I stick to what works...

[Pyzik]

Lost my original Cryo right before Christmas so I grabbed one of the BladeHQ D2 blade G10 scale Cryos. I wish they made the Cryo line in the US.
It's no ZT566 but it'll do.

https://farm8.staticflickr.com/7852/46760549711_4736a72acd_c.jpg (https://flic.kr/p/2ef53jk)
Kershaw Cryo (https://flic.kr/p/2ef53jk) by Damage Photos (https://www.flickr.com/photos/damagephotos/), on Flickr

[Joelski]

Saw DSG had 556's for a hundy.

[Pyzik]

Saw DSG had 556's for a hundy.

OOS. :( That's a great price.

[Joelski]

I dig the blackwash.https://uploads.tapatalk-cdn.com/20190116/df1ff9d18da2d2a058aa56eb5fcd92be.jpg

[JMJ]

When new stuff comes out there is worth showing I will.

Unlike some, I stick to what works...

I’m very much the same way once I found the knives that work well for me. These three have been my most carried for the last two years.
6204

[Joelski]

Who turned you on to Adamas? My one tan one, or Jonny's 20 black ones?

[:D]

[JMJ]

Who turned you on to Adamas? My one tan one, or Jonny's 20 black ones?

[:D]

Neither, I messed around with this one a few times after Evan bought it. After he carried it for a year or so he complained about it being too big as a daily carry and offered to sell for 100 bucks. Johnny definitely gave it an honest effort to like it[BD]

[voodoo_man]

https://i.imgur.com/opZflKC.png (http://www.vdmsr.com/2019/01/must-haves.html)

[voodoo_man]

https://i.imgur.com/AuDBbHQ.jpg (https://www.vdmsr.com/2019/02/amtacbladescom-northman-blade.html)

[voodoo_man]

https://i.imgur.com/1TDJHjW.jpg (http://www.vdmsr.com/2019/02/headhunterbladescom-rat-blade.html)

[JMJ]

New work edc knife.

6343

[Joelski]

Nice! That has some touches I like better than Ernie's knives.


New work edc knife.

6343

[JMJ]

Nice! That has some touches I like better than Ernie's knives.

It’s been a great knife over the last few weeks I’ve been carrying it. Like most knife nerds it straight to my DMT stone as soon as I got it to get the factory grind marks off and it sharpened up like a razor. I’m still amazed it’s just a $33 knife. Ernie’s gonna be releasing his version called the Rendezvous this year to $250 you’ll get the same blade shape slightly better steel, Ti liner lock and G10 scales on both sides. I’m not sure if that juice is worth the squeeze, but with Benchmade shitting the bed for gun owners Emerson might be a place to look. I LOVE the wave feature, this CQC-11 has been the most fun folder to deploy I’ve messed with so far.

I won’t be opposed to picking up Benchmades from the used market though. I’m likely getting a Contego in a trade soon.

[Stone]

6350
6351

[voodoo_man]

https://i.imgur.com/GYaxx6d.jpg (https://www.vdmsr.com/2019/03/bring-your-tools.html)

[voodoo_man]

https://i.imgur.com/aObxpxp.png (https://www.vdmsr.com/2019/03/just-texas-things.html)

[JMJ]

6364

Picked up this Benchmade Contego in CPM-M4 steel in a trade. Looking forward to putting it to use.

[voodoo_man]

https://i.imgur.com/k4wduXh.jpg (https://www.vdmsr.com/2019/03/high-end-blades-and-blasters.html)

[voodoo_man]

https://i.imgur.com/ivWueVR.jpg (https://www.vdmsr.com/2019/03/niche-tools.html#more)

[JMJ]

7797
7798