UWone77
20 September 2016, 23:44
https://www.magpul.com/products/hunter-x-22-takedown-stock-ruger-10-22-takedown?utm_source=x22&utm_medium=x22&utm_campaign=x22&utm_term=x22&utm_content=x22
The Magpul Hunter X-22 Takedown (https://www.magpul.com/products/hunter-x-22-takedown-stock-ruger-10-22-takedown?utm_source=x22&utm_medium=x22&utm_campaign=x22&utm_term=x22&utm_content=x22) chassis is an ergonomic, full-featured stock for the Ruger 10/22 Takedown series rifle.
Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK® slots for accessory attachment.
The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory pencil profile as well as heavy bull barrels.
Made in U.S.A.
FEATURES
Drop-in design compatible with all factory Ruger 10/22 Takedown .22 LR receivers
Reinforced polymer construction for strength and durability
60 degree grip angle from bore axis
Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
Non-slip rubber butt-pad
Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920”
Adjustable barrel tensioning shim in forend for setting barrel preload (barrel may also be free-floated)
Compatible with all capacities of factory Ruger 10/22 magazines
M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options
Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
Push-button QD swivel compatibility in rear with optional Sling Mount Kits
Left and Right rear 1-1/4” Footman’s Loops
1709
1707
1708
The Magpul Hunter X-22 Takedown (https://www.magpul.com/products/hunter-x-22-takedown-stock-ruger-10-22-takedown?utm_source=x22&utm_medium=x22&utm_campaign=x22&utm_term=x22&utm_content=x22) chassis is an ergonomic, full-featured stock for the Ruger 10/22 Takedown series rifle.
Made from high quality reinforced polymer, the Hunter X-22 Takedown features an ergonomic grip, adjustable length of pull and comb height to fit a wide variety of shooters, multiple sling mounting options, a non-slip rubber butt-pad, and M-LOK® slots for accessory attachment.
The Hunter X-22 Takedown fits standard Ruger 10/22 Takedown .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory pencil profile as well as heavy bull barrels.
Made in U.S.A.
FEATURES
Drop-in design compatible with all factory Ruger 10/22 Takedown .22 LR receivers
Reinforced polymer construction for strength and durability
60 degree grip angle from bore axis
Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
Non-slip rubber butt-pad
Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920”
Adjustable barrel tensioning shim in forend for setting barrel preload (barrel may also be free-floated)
Compatible with all capacities of factory Ruger 10/22 magazines
M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options
Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
Push-button QD swivel compatibility in rear with optional Sling Mount Kits
Left and Right rear 1-1/4” Footman’s Loops
1709
1707
1708