View Full Version : 226 project
8teenEcho
21 December 2016, 22:24
I need to bring this old 226 workhorse new life. What would you do? 2392
Pyzik
22 December 2016, 06:15
Sell it and get a superior weapon system?
Just teasing!
GriffonSec
22 December 2016, 06:49
Gray Guns trigger and SRT kit. Maybe threaded barrel? Not a lot that a 226 needs. Miss mine....
8teenEcho
22 December 2016, 11:47
Thanks GriffonSec, I'll look into those parts. Would stripping and cerakoting the internals be a bad idea? I'm tempted to get it to a good gunsmith to make it run as good as possible.
n4p226r
26 December 2016, 12:39
assemble it with new springs, a SRT kit, and call it a day
Axlnut
26 December 2016, 13:04
I recently did a West German 220 for a customer, Cerakoted everything including all internals. Not necessary but it gave him a new, even finish on all parts, everything functions smoothly, etc.
Took the time do debur some edges and crispen up the serrations on the stamped controls as well. He was very happy with the result.
Eric
26 December 2016, 22:17
Many years ago I had a well used 226 that I sent to Sig for a factory tune-up, which essentially was a replacement of all small parts and detailed inspection. At the time it was a very reasonable cost. I then sent it to Checkmate for a hard chrome finish on the slide and matching anodizing on the lower, then new Trijicon night-sights. Wish I still had that one.
Sent from my XT1575 using Tapatalk
Default.mp3
26 December 2016, 23:01
If you don't want the wait of GrayGuns, check out Lazy Wolf Guns: http://www.lazywolfguns.com/sig-sauer.html
Rick Holm was the H&K guy at GrayGuns for several years, before he struck out on his own recently.
fairlanericky
27 December 2016, 13:04
There's also Robert Burke.
http://www.thesigarmorer.com/
Another suggestion would be micro-slick coating on the internals and a nice Sig Dark Gray Cerakote on the frame and slide and some good night sights.
Hogue grips.
Ric
8teenEcho
6 January 2017, 18:25
Thanks for all the input guys! I have a Grey guns trigger and a Sig SRT. I think I'll put some new springs in it too. Even though the grip stippling isn't perfect I like them.
I have a local shop Cerakoting another project now, and if it turns out well I'll let them give this a coat.
I'm thinking black controls with a dark titanium slide/ frame. A nice dark green is so tempting though.
UWone77
7 January 2017, 18:54
Between this and the P320 stippling thread, I need to get more Sig's in my life.
Thanks for being bad influences.
Axlnut
7 January 2017, 19:01
Thanks for all the input guys! I have a Grey guns trigger and a Sig SRT. I think I'll put some new springs in it too. Even though the grip stippling isn't perfect I like them.
I have a local shop Cerakoting another project now, and if it turns out well I'll let them give this a coat.
I'm thinking black controls with a dark titanium slide/ frame. A nice dark green is so tempting though.
My advice - if you are tempted by the dark green, just do it. I have re-done a number of guns done the "tamer" of two choices, usually a Ti/grey shade. I guess the thought process is to be more neutral with the color and more proper.. but those don't include satisfied. The one that tempts you, that's the one that will make you smile every time you look at it.
If you're spending the money anyway, go for broke. Live it up ;-)
Mecha_Arms
23 March 2017, 18:13
Thanks for all the input guys! I have a Grey guns trigger and a Sig SRT. I think I'll put some new springs in it too. Even though the grip stippling isn't perfect I like them.
I have a local shop Cerakoting another project now, and if it turns out well I'll let them give this a coat.
I'm thinking black controls with a dark titanium slide/ frame. A nice dark green is so tempting though.
What sort of progress did you make on this?
If you haven't done the cerakote yet, I would suggest you go for the dark green. I can say that it looks great on a 226.
I would have the X5 undercut done to it before Cerakoting. The X5 undercut really improved the feel on the Legion series.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.