Cotton68spc
22 December 2016, 10:42
Just got this email
SIG SAUER - MCX Mandatory Carriage Assembly Replacement Program
SIG SAUER is conducting a mandatory replacement of the carriage assembly in SIG MCX rifles. SIG has found through extensive factory testing that in extremely rare instances, not reported in the field and extremely difficult to replicate, a condition may exist causing an unintended discharge. Failure to follow the loading procedures and basic rules of safe firearms handling outlined in the user’s manual has the potential to cause serious bodily harm or death. Although this has only been witnessed in 300 blackout, SIG has decided to upgrade all MCX models since the MCX is a modular platform and we want to ensure the quality and reliability of all products we manufacture.
Stop use of firearm immediately, and visit the SIG SAUER website listed below as soon as possible to register your firearm, initiate the process and view a video explaining how to change out your carriage assembly. SIG will send you a prepaid box to return your complete carriage assembly to the factory. A new assembly, designed with the firing pin locking mechanism, will be shipped out to you within 5-7 working days of the receipt of your parts at no cost to you. Please note total in transit times will vary based on geographic locations. SIG will also send you a $50 gift voucher for any inconvenience this may have caused. This upgraded carriage assembly addresses this potential issue while enhancing the performance and longevity of your rifle. You may also contact SIG SAUER customer service at the number below with any questions if needed.
SIG SAUER is committed to addressing this issue in an expedited manner, and appreciates your support.
Firearm Registration - https://www.sigsauer.com/support/warranty/warranty-registration/
For Customer Service - 603-610-3000: Option 2
For Instructional Video - https://www.sigsauer.com/press-releases/mcx-mandatory-carriage-assembly-replacement-program
*Serial numbers 63C000044 – 63C003702 – Contact SIG Customer Service for instructions.
*If you have replaced your trigger group with an aftermarket trigger please contact SIG Customer Service for instructions.
*SIG SAUER Dealers should call designated Commercial Sales Support Representative.
*Any MCX rifle with a serial number ending in 25000 or higher is exempt from this program.
Current Carriage Assembly
NEW Carriage Assembly with Firing Pin Lock
SIG SAUER
SIG SAUER
SIG SAUER
PISTOLS RIFLES SILENCERS OPTICS AMMO AIRGUNS STORE ACADEMY
STAY CONNECTED
FACEBOOKYOUTUBEINSTAGRAM
Terms and conditions: All trademarks, service marks, trade names, trade dress, product names and logos appearing in this email are the property of their respective owners. No trademark or service mark appearing in this email may be used without the prior written consent of the mark’s owner. We are sending this email because you have either registered your firearm with us, registered for our newsletters, or entered one of our promotions. DO NOT REPLY TO THIS EMAIL, as this email address is used only for sending information about special promotions or surveys. This mailbox is not monitored. If you need assistance or have questions regarding our products or services, please call (603)-610-3000, and we will be happy to assist you. Thank you.
SIG SAUER Inc.,
72 Pease Boulevard, Newington, NH 03801
(603) 610-3000
www.SIGSAUER.com
This message was sent to coryrstamper@yahoo.com from:
SIG SAUER - Do Not Reply To This Email | sigsauer@sigsauer.com | SIG SAUER, Inc. | 72 Pease Blvd. | Newington, NH 03801
Email Marketing by iContact - Try It Free!
Unsubscribe
Sent from my iPhone using Tapatalk
SIG SAUER - MCX Mandatory Carriage Assembly Replacement Program
SIG SAUER is conducting a mandatory replacement of the carriage assembly in SIG MCX rifles. SIG has found through extensive factory testing that in extremely rare instances, not reported in the field and extremely difficult to replicate, a condition may exist causing an unintended discharge. Failure to follow the loading procedures and basic rules of safe firearms handling outlined in the user’s manual has the potential to cause serious bodily harm or death. Although this has only been witnessed in 300 blackout, SIG has decided to upgrade all MCX models since the MCX is a modular platform and we want to ensure the quality and reliability of all products we manufacture.
Stop use of firearm immediately, and visit the SIG SAUER website listed below as soon as possible to register your firearm, initiate the process and view a video explaining how to change out your carriage assembly. SIG will send you a prepaid box to return your complete carriage assembly to the factory. A new assembly, designed with the firing pin locking mechanism, will be shipped out to you within 5-7 working days of the receipt of your parts at no cost to you. Please note total in transit times will vary based on geographic locations. SIG will also send you a $50 gift voucher for any inconvenience this may have caused. This upgraded carriage assembly addresses this potential issue while enhancing the performance and longevity of your rifle. You may also contact SIG SAUER customer service at the number below with any questions if needed.
SIG SAUER is committed to addressing this issue in an expedited manner, and appreciates your support.
Firearm Registration - https://www.sigsauer.com/support/warranty/warranty-registration/
For Customer Service - 603-610-3000: Option 2
For Instructional Video - https://www.sigsauer.com/press-releases/mcx-mandatory-carriage-assembly-replacement-program
*Serial numbers 63C000044 – 63C003702 – Contact SIG Customer Service for instructions.
*If you have replaced your trigger group with an aftermarket trigger please contact SIG Customer Service for instructions.
*SIG SAUER Dealers should call designated Commercial Sales Support Representative.
*Any MCX rifle with a serial number ending in 25000 or higher is exempt from this program.
Current Carriage Assembly
NEW Carriage Assembly with Firing Pin Lock
SIG SAUER
SIG SAUER
SIG SAUER
PISTOLS RIFLES SILENCERS OPTICS AMMO AIRGUNS STORE ACADEMY
STAY CONNECTED
FACEBOOKYOUTUBEINSTAGRAM
Terms and conditions: All trademarks, service marks, trade names, trade dress, product names and logos appearing in this email are the property of their respective owners. No trademark or service mark appearing in this email may be used without the prior written consent of the mark’s owner. We are sending this email because you have either registered your firearm with us, registered for our newsletters, or entered one of our promotions. DO NOT REPLY TO THIS EMAIL, as this email address is used only for sending information about special promotions or surveys. This mailbox is not monitored. If you need assistance or have questions regarding our products or services, please call (603)-610-3000, and we will be happy to assist you. Thank you.
SIG SAUER Inc.,
72 Pease Boulevard, Newington, NH 03801
(603) 610-3000
www.SIGSAUER.com
This message was sent to coryrstamper@yahoo.com from:
SIG SAUER - Do Not Reply To This Email | sigsauer@sigsauer.com | SIG SAUER, Inc. | 72 Pease Blvd. | Newington, NH 03801
Email Marketing by iContact - Try It Free!
Unsubscribe
Sent from my iPhone using Tapatalk