Jinxy
7 February 2017, 11:33
12.5” Mid Length Upper (SMOS Arms, Noveske, Geissele, BE MEYERS Silencerco FH)
-12.5” Midlength SMOS Barrel Match profile, 223 wylde, 1:8, .750 gas block 416-R stainless, Bead Blasted finish. Barrels are Shilen. (75 rds)
-Stainless Gas block and tube. Barrel is dimpled for one setscrew. (75 rds)
-SMOS Arms Nitride BCG. 9310 bolt, 8620 Case Hardened Steel carrier (75 rds)
-SMOS Arms GFY Upper Receiver with FWD Assist. This upper is from what I can tell exactly like a Gen 3 Noveske (which makes sense since SMOS arms manufactured the Gen 3 receivers for Noveske at one time) (75 rds)
-11” Noveske NSR Quad Rail Chainsaw (I cannot find the blem) (75 rds)
-BE Meyers Silencerco ASR FH (75 rds)
-Geissele Super Charging Handle Desert Dirt Cololr (has around 300 rounds on it)
-I put this together using a Geissele Reaction rod.
-BE Meyers ASR was timed (because of my ocd) and torqued to 20 ft lbs and I used rockset.
-Small amt of red loc tite used on gas block screws
-Barrel extension was greased as well as receiver threads and rail was torqued to a final value of around 65 ft lbs to achieve appropriate timing of barrel nut.
-Above upper was taken to range to be sighted in (75 rds total). Gun shot several 1” groups with Freedom Munitions reman. I also shot this upper out to 400 yds with an ACOG. This upper is VERY accurate and a soft shooter with the mid length gas. More than capapble of sub 1” groups with good ammo. I ran with a silencerco Specwar and an H2 buffer on the lower I used.
I am selling because I am purchasing a Leupold Mk 6 1-6
I will take 975.00 shipped. I am not separating bolt or charging handle. Price is firm. Contact me at jinxey81@yahoo.com
http://i1035.photobucket.com/albums/a439/Jinxy81/70E0D5D0-4779-490D-8077-3D5786466C54_zpsuenaqnvs.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/E3A7580F-6AF3-41FE-9637-93BD922F9AB0_zpswofmwmeg.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/013E9BA7-FA01-4247-A00B-44CE736118A7_zpsnkskvwcr.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/DCB571D2-B46F-43BB-ACAE-7CD0C1EF74DF_zpswpersmzk.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/F73ECACB-9FF1-4E26-98DB-D3132B924A49_zps8z7vez58.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/366150E6-CB9E-4DD4-89AD-7DA81D544C49_zpspycnqatz.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/B038CE53-B7D1-499E-BD4A-846B98B96E53_zpsdxtf4lsc.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/07CC841D-3271-49E6-9F2F-BDD832E38A69_zpsoofcf5de.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/74CD51B7-D74E-4467-AC03-66601EA52106_zpsfh9tpplb.jpg
This is the only scuffs I see on the upper, from where the acog was mounted.
http://i1035.photobucket.com/albums/a439/Jinxy81/D01A017A-EB2D-4FB2-8477-0C7B1DEF643F_zpsdebsvsh0.jpg
-12.5” Midlength SMOS Barrel Match profile, 223 wylde, 1:8, .750 gas block 416-R stainless, Bead Blasted finish. Barrels are Shilen. (75 rds)
-Stainless Gas block and tube. Barrel is dimpled for one setscrew. (75 rds)
-SMOS Arms Nitride BCG. 9310 bolt, 8620 Case Hardened Steel carrier (75 rds)
-SMOS Arms GFY Upper Receiver with FWD Assist. This upper is from what I can tell exactly like a Gen 3 Noveske (which makes sense since SMOS arms manufactured the Gen 3 receivers for Noveske at one time) (75 rds)
-11” Noveske NSR Quad Rail Chainsaw (I cannot find the blem) (75 rds)
-BE Meyers Silencerco ASR FH (75 rds)
-Geissele Super Charging Handle Desert Dirt Cololr (has around 300 rounds on it)
-I put this together using a Geissele Reaction rod.
-BE Meyers ASR was timed (because of my ocd) and torqued to 20 ft lbs and I used rockset.
-Small amt of red loc tite used on gas block screws
-Barrel extension was greased as well as receiver threads and rail was torqued to a final value of around 65 ft lbs to achieve appropriate timing of barrel nut.
-Above upper was taken to range to be sighted in (75 rds total). Gun shot several 1” groups with Freedom Munitions reman. I also shot this upper out to 400 yds with an ACOG. This upper is VERY accurate and a soft shooter with the mid length gas. More than capapble of sub 1” groups with good ammo. I ran with a silencerco Specwar and an H2 buffer on the lower I used.
I am selling because I am purchasing a Leupold Mk 6 1-6
I will take 975.00 shipped. I am not separating bolt or charging handle. Price is firm. Contact me at jinxey81@yahoo.com
http://i1035.photobucket.com/albums/a439/Jinxy81/70E0D5D0-4779-490D-8077-3D5786466C54_zpsuenaqnvs.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/E3A7580F-6AF3-41FE-9637-93BD922F9AB0_zpswofmwmeg.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/013E9BA7-FA01-4247-A00B-44CE736118A7_zpsnkskvwcr.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/DCB571D2-B46F-43BB-ACAE-7CD0C1EF74DF_zpswpersmzk.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/F73ECACB-9FF1-4E26-98DB-D3132B924A49_zps8z7vez58.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/366150E6-CB9E-4DD4-89AD-7DA81D544C49_zpspycnqatz.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/B038CE53-B7D1-499E-BD4A-846B98B96E53_zpsdxtf4lsc.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/07CC841D-3271-49E6-9F2F-BDD832E38A69_zpsoofcf5de.jpg
http://i1035.photobucket.com/albums/a439/Jinxy81/74CD51B7-D74E-4467-AC03-66601EA52106_zpsfh9tpplb.jpg
This is the only scuffs I see on the upper, from where the acog was mounted.
http://i1035.photobucket.com/albums/a439/Jinxy81/D01A017A-EB2D-4FB2-8477-0C7B1DEF643F_zpsdebsvsh0.jpg