Results 1 to 15 of 18
Thread: Geissele Maritime Bolt Catch
-
6 April 2017, 11:37 #1
Geissele Maritime Bolt Catch
The Geissele Maritime Bolt Catch is designed with the warfighter in mind and will work with any lower receiver designed to accept a mil-spec M16/M4 Carbine bolt catch. The increased surface area promotes ease of function when locking back the bolt or releasing the bolt after a magazine change. In addition, the extended controls add an increased functionality for left handed shooters who no longer have to break their grip to manipulate the bolt catch. Left handed shooters can easily reach the controls using the index finger of their left hand making magazine changes and locking the bolt back much more fast and efficient. Aggressive checkering covers the surface of the levers giving the Geissele Maritime Bolt Catch a textured surface that enables positive feedback to the shooters hand when being used with gloves or at night. Manufactured from properly heat treated 8620 steel and manganese phosphate coated, the Geissele Maritime Bolt Catch is intended to serve as an enhanced mil-spec replacement and assist in giving our warfighters overmatch capability with the M16/M4 carbine platform.
MSRP $29.00
https://geissele.com/maritime-bolt-catch.html
-
6 April 2017, 12:39 #2
I'm interested. But I'm waaaay more interested in that receiver!
I suppose it's a been done and never again, like Magpul...There's no "Team" in F**K YOU!
-
6 April 2017, 13:12 #3
-
6 April 2017, 14:35 #4
What makes it "maritime"?
-
6 April 2017, 16:07 #5
FCD in every way. Surprised Geissele put this out.
-
6 April 2017, 16:13 #6
-
11 April 2017, 07:36 #7Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
11 April 2017, 07:56 #8
I have a few SIG AR's that come from the factory with the extended lower paddle on the bolt catch. I like those so much I tried to purchase some from Sig but they would not sell them. One area where I felt FCD could have improved upon.
-
11 April 2017, 08:21 #9Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
11 April 2017, 10:30 #10
Different designs for different goals. The ABC/R's goal was to create a clear difference between the ambi mag catch's lever and the bolt catch's lower paddle, when they're so close together and almost flush with one another, they feel quite similar, especially with a gloved hand.
It wasn't our objective to make the paddles accessible by the finger while the left hand is grasping the grip, just as it wasn't Geissele's objective to make their bolt catch ambi mag catch more accessible.
I do have preliminary designs to do that, while retaining the ABC/R's original objective, and it might still see the light of day.Last edited by Duffy; 11 April 2017 at 11:41.
-
11 April 2017, 13:50 #11
Roger, That is what I'm calling cross-hatching. I want a ABC with that to match my RA controls. Hell, it's beefy enough I could grind off the serrations and make my own, but I thought there were more than the 20 sets of controls on the battle kittys similar to it. The Seekins catch has diagonal cross-hatching, but it just doesn't fit in with the rest of the gun.
Alas, I understand your point about feeling different, but chances are if they don't know the controls, they need to get their damn hands off my rifle!
Edit: plus, the controls really aren't as close as Sinner's Sig. Pardon my dust!
Last edited by Joelski; 11 April 2017 at 13:56.
There's no "Team" in F**K YOU!
-
11 April 2017, 15:15 #12
20LPI will be made, after 308 ABC/Rs :D
-
11 April 2017, 15:19 #13
I can wait that out.
There's no "Team" in F**K YOU!
-
11 April 2017, 15:22 #14
I still like how FCD is Billet vs The Geissele one that is MIM.
Will still use both though.
-
11 April 2017, 18:22 #15
Ours is quite a bit more expensive as a result too I don't like to be thought of as a boutique company, the high cost of our product is often due to expensive manufacturing methods and small batches, which allow us to make improvements and changes quickly.
I never saw the need to extend the paddles further when ABC/R was designed when the idea was hatched while I was still at BAD, and I still don't. But if there's demand, we can make an extended reach version of the ABC/R, the design is already done, we've been busy with other projects so it wasn't a priority.