Results 31 to 45 of 95
-
8 May 2017, 12:24 #31
i swear i just saw a bunch of toolcraft bcg's somewhere, but now i can't find them. i'm guessing somewhere in the $100 range?
and would it help if i posted what i was thinking of going with so that people can tell me if i'm on the right track with parts? I've been doing my research as much as i can, but wouldn't mind a few extra opinions from someone with more experience.
my lower is an anderson stripped lower with BCM enhanced LPK (includes PNT trigger). magpul CTR buttstock, and some no name buffer tube spring and buffer combo that was like $22...might regret that later...we'll see.
my upper as of this moment, is looking like the aero precision upper, 15" aero quantum mlok handguard, 16" ballistic advantage mid profile government barrel, spikes melonite gas tube, trinity force micro gas block (which i'm second guessing at the moment so input would be helpful), standard a2 birdcage, still looking for a quality and not as expensive bcg, and radian raptor CH (because i have to have an ambi CH...#leftyprobs) and they're sexy. mbus sights.
thoughts?Last edited by poimen; 8 May 2017 at 12:37.
-
8 May 2017, 12:32 #32There's no "Team" in F**K YOU!
-
8 May 2017, 12:39 #33
found a bunch of different ones on monmouthreloading.com...
http://www.monmouthreloading.com/sho...k-nitride-bcg/ a hair cheaper
-
10 May 2017, 11:51 #34
can anyone recommend a 15" M-lok handguard that doesn't use the BAR platform? i was looking at the aero ones and talking with some people that have installed them and it sounds kind of like it's a pain in the butt to shim it just right to get the gas port to line up just right. i'm looking at staying around $80 (if that's possible).
-
10 May 2017, 12:20 #35
This is the best bang for the buck 15" M-LOK handguard I've seen.
https://www.rainierarms.com/faxon-st...ok-handguards/
-
10 May 2017, 12:47 #36
looks great, but a little more than i was gonna pay for a rail. that's like 2 or 3 extra visits to csl plasma...lol
-
10 May 2017, 13:00 #37
-
10 May 2017, 13:04 #38
-
10 May 2017, 13:11 #39
-
10 May 2017, 13:15 #40
Only thing I need to buy is an armorers wrench and the upper vice blocks, I've got everything else I would need at this point. I've got a buddy with a vice and I have roll pin punches already from the lower build. I don't need the fancy guisele roll pin starter punch. I can just use a pair of needle nose pliers. Lol.
Sent from my iPhone using Tapatalk
-
10 May 2017, 13:34 #41
-
10 May 2017, 13:36 #42
-
10 May 2017, 13:39 #43
And for 80 bucks you are going to find it difficult to find anything decent. I would think you might be able to find something second hand that is fairly decent. About 150 and you can get something decent probably if you're going new.
At that low of a price ($80) you are really rolling the dice. If you DO manage to find something new it has about 50/50 chance of being either a piece of junk or completely out of spec.
-
10 May 2017, 13:41 #44
-
10 May 2017, 13:45 #45
This all sounds like a train wreck. We've all done one before. Make sure you post pics of all the idiot marks and fuck ups.