Results 16 to 20 of 20
Thread: Colt / KAC Project
-
9 May 2017, 05:23 #16
Not yet built. It's going on the other Colt OEM1 I'm just having a tough time deciding since I'm not a 100% cloner to just throw it on the 16" barrel, or swap it out for a Colt 14.5" or just cut down the existing 16"
On a side note, I ran 90 rounds through the 10.3" today, just to check function. With a standard H buffer on an SBR lower, the 10.3" ran 100% on UMC 55gr ammo without a hitch. I'm pretty pleased with this, since the gun ran soooooooo smoothly without a can. I think with the .063 gas port, it'll be about as good as suppressor host as you can get.
-
9 May 2017, 05:41 #17
It'll be sexy either way. What optic would you put on it?
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
9 May 2017, 14:17 #18
Personally, I think a 16" M4 barrel cut down to 14.5" just looks awkward, clone or not. And since, let's be honest, you have so many other rifles that this one will be built in part due to looks, I wouldn't recommend going that direction.
But it's very easy for me to spend your money, so ignore as you see fit.
-
10 May 2017, 16:23 #19
-
3 March 2018, 14:01 #20Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
Have you considered the colt 14.5” with the socom profile or are you looking to go with a true clone?