Results 1 to 15 of 24
-
3 June 2017, 10:29 #1
M4 project. Try to Guess from the Pics...
Last edited by Sancho Panza; 5 June 2017 at 06:36.
-
3 June 2017, 10:32 #2
-
5 June 2017, 06:36 #3
Last edited by Sancho Panza; 5 June 2017 at 10:29.
-
5 June 2017, 09:01 #4
So what's the end game for this build?
-
5 June 2017, 09:52 #5
Attack of the Clones?
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
5 June 2017, 10:10 #6
-
5 June 2017, 10:23 #7Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
5 June 2017, 10:26 #8
Replacing 16.1" Barrel on my Colt M4 with a 14.5" P&W.
Only took me 20 years to get around to it...For every Southern boy fourteen years old, not once but whenever he wants it, there is the instant when it’s still not yet two o'clock on that July afternoon in 1863...
William Faulkner, Intruder in the Dust 1948
-
5 June 2017, 10:26 #9
-
5 June 2017, 10:28 #10Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
5 June 2017, 10:29 #11
I've got a Colt 14.5 Upper I wanted to install my DD RIS II FSB
But I've also got a strong desire for a M4 Block 1 clone.
At least Colt stripped uppers and barrels are still relatively affordable.
-
5 June 2017, 10:35 #12
Prolly gonna keep the old barrel, as the value is low; was a truck gun & lost most of the barrel finish.
End up on another truck gun???
-
5 June 2017, 14:59 #13
Thought M4's were 14.5"? Wouldn't a 16" just be an A4 (or 3, or 2, or...)?
There's no "Team" in F**K YOU!
-
5 June 2017, 15:57 #14
My guess is an M4 project based off of the pics.
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
6 June 2017, 12:34 #15
I have a spare BCM 14.5" Carbine Upper that I've never done anything with. Might just use that as my M4 Copy.