Results 1 to 15 of 22
Thread: Aimpoint T1 and T2 mounts
Hybrid View
-
30 June 2017, 07:48 #1
Aimpoint T1 and T2 mounts
Can someone tell me with certainty that the T1 and T2 mounts are the same? I need to get a mount so I can complete my parts list and get my new project to Axlmut for cerakote. I'm not sure which Aimpoint I'll be using but it'll be one or the other.
Thanks much,
FTNRA Life Member
Basket full of Deplorables Life Member
-
30 June 2017, 08:00 #2Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
30 June 2017, 08:17 #3
Slippers is correct as usual. What mounts you looking at? My favorite Aimpoint Micro mount has been Scalarworks' by a big margin.
-
30 June 2017, 08:47 #4
Last edited by FortTom; 30 June 2017 at 08:53.
NRA Life Member
Basket full of Deplorables Life Member
-
30 June 2017, 08:55 #5Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
30 June 2017, 08:57 #6
I have had both of those and like the Bobro better of those two. I liked my Scalarworks better than both of those. It's a whole lot lighter, less than half the weight of either of those. I would like to try the one from KDG.
https://kineticdg.com/product/sidelo...t-t1-t2-h1-h2/
-
30 June 2017, 09:01 #7
-
2 July 2017, 12:09 #8
-
2 July 2017, 06:24 #9
-
2 July 2017, 07:34 #10
-
2 July 2017, 07:09 #11
If your looking for lightweight and durable the Schalorworks is your best bet...
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
2 July 2017, 11:49 #12
The Seekins mount is pretty light and comes in absolute co-witness. The lower third Geissele I just got weighs a ton, but can be used as a bludgeoning tool as opposed to tin foil origami. I'm looking at tall mounts like the MAC, and not seeing a downside.
There's no "Team" in F**K YOU!
-
2 July 2017, 12:29 #13
I use a T2 with a Cross Machine Tool lower 1/3 mount on my SBR. It's not QD but extremely solid.
-
2 July 2017, 14:09 #14
I've had good luck with Scalarworks products but that mount is severely overpriced. If weight is the primary concern hard to beat that Fortis mount for half the cost. CMT is a good mount. Had one on a Saiga 12 and it never moved. Just pretty plain looking if that matters.
-
2 July 2017, 17:09 #15