Results 136 to 150 of 2419
Thread: NFA Picture Thread
-
15 February 2011, 05:38 #136
Hatter - TeLlama has it correct. It is 6.8 and it's a BABC.
I recently built up an 11.5" 5.56 upper with a BCM 410 stainless barrel and Battlecomp 1.0. I halted the project and put it up for sale to help fund my Mega .308 build.
I only put 50 rounds through it on a break in, but found similar performance in the comp. I've yet to have any negative issues with the Battlecomps, great comps that work extremely well. Of interesting note, the 6.8 upper with the BABC looks to be about an inch, inch and a half shorter than the 11.5 with the 1.0. Depending on use, any future rifles I build will include the Battlecomp.
-
15 February 2011, 06:14 #137
That's excellent information!
I like the look of the 11.5" build. It's the configuration I'll be building except it'll be a Rainier billet upper and 10.5 Ultramatch barrel. It should put the Battle Comp right at the end of the DDLite 10.0. I'm just slightly delayed because I've learned my local LE wont sign off so I'm heading down the LLC route. Although, once it's complete it'll make all my future builds and other ATF approved toys much easier.
Thanks for the insight.
-
15 March 2011, 11:55 #138Member
- Join Date
- Jan 2011
- Location
- NE Georgia
- Posts
- 3
- Downloads
- 0
- Uploads
- 0
Here's a pic of my old Mk12 Mod0. I parted out the upper receiver to buy a motorcycle, which has since been sold to resurrect another SPR upper.
Details of this upper are:
Noveske SPR rifle length gas barrel in PRI FF tube with ARMS 36PEQ rail and long bottom rail with KAC grip, ARMS 22 med rings, PRI front sight, ARMS 40L rear, Nikon 2.5-10 mildot scope, BCM M16 carrier, AAC M4-1000 can.
This rifle was boringly accurate. I regret letting go of the barrel over all.
New rifle consists of SOPMOD stock, Noveske lower, Noveske intermediate GS SPR barrel, same can, MI 12" T FF tube (can't find a KAC FF rifle tube right now), ARMS 22 high rings with Nikon scope. It's shot well to this point, and it still in break in (<60 rounds). Hopefully it'll match the first one
-
19 March 2011, 19:34 #139
Started with a complete Daniel Defense Mk18 upper, and went a little crazy from there...
...'cause they don't make a pill for stupid...
-
2 April 2011, 21:59 #140
FINALLY:
10.5" 7.62x39
12" 6.8SPCII---sold but not forgotten
Suppressed at Gun Warehouse and Range
Last edited by lmtrocks; 26 June 2011 at 19:53.
"Ever notice the sound of a gun being charged is the universal language of dominance?"
Why I own a Grendel: "You don't shoot 6.5 bullets. You toss them in the air, they go downrange on their own."
There are no such things as problems. There are only opportunities for solutions. And I've arrived at a solution for you.
-
8 April 2011, 18:08 #141Manufacturer
- Join Date
- Jan 2010
- Location
- Chandler, AZ
- Posts
- 110
- Downloads
- 0
- Uploads
- 0
HK MP5SD
-
9 April 2011, 16:15 #142
Nothing fancy, 11.5"
-
11 April 2011, 16:07 #143Triple Bravo
http://www.flickr.com/photos/triplebravo/
-
23 April 2011, 20:50 #144
POF Lower with Magpul goodies and Rock River 2 Stage lower kit.
UBR Stock and KNS pins.
Upper is Rainier Ultramatch 10.5 with BattleComp 2.0 and DD Lite 10.0 rail. Rainier Thunderbolt BCG
Hatter
Took a little hiatus... good to be back.
-
24 April 2011, 06:28 #145
This was going to be a lightweight build, but I lost focus a little. It came in at 6 lb 5 oz, but handles really well. I do really like the CTR stock.
Last edited by Hmac; 3 February 2015 at 04:23.
-
29 April 2011, 18:23 #146Member
- Join Date
- Apr 2010
- Location
- Brooksville, FL
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
My Mk18 Mod1 ish SBR.
DD 10.3" Barrel
Vltor MUR upper
BCM BCG with Gunfighter CH
KAC NT4-QDSS flash hider
Troy BUIS
Aimpoint Micro in Larue Mount
Geissele SD-3G trigger (love it!!!!!!!!)
Not pictured: KAC NT4-QDSS can sitting at my dealer.
-
29 April 2011, 19:53 #147
NICE m249Saw!
Triple Bravo
http://www.flickr.com/photos/triplebravo/
-
30 April 2011, 08:00 #148Member
- Join Date
- Apr 2010
- Location
- Brooksville, FL
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
Thanks, its my 3rd or 4th version, lol. Next up Im thinking a 14.5" Centurion middy.
-
30 April 2011, 12:01 #149Triple Bravo
http://www.flickr.com/photos/triplebravo/
-
18 May 2011, 20:19 #150
Latest Project. Have a new lower just waiting on the CTR stock kit from Rainier Arms.Last edited by Tactical Ninja; 25 May 2011 at 15:03.