Results 1,696 to 1,710 of 2419
Thread: NFA Picture Thread
-
21 July 2017, 15:12 #1696
Reply from Jayson today:
I appreciate you checking with me.
I can vent your factory 10.4 block no problem, at this point I’ve done quite a few.
They are a bear to bore through with a .035” drill bit but as I said I’ve done several at this point, the cost is $195 plus return shipping.
You’ve probably already seen my description but if not you can read more about the modification here http://www.investmentgradefirearms.c...inch-hk-mr556/
ETA: Maybe worth a thread split. #416loveLast edited by gatordev; 21 July 2017 at 15:18.
-
22 July 2017, 09:52 #1697Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
22 July 2017, 11:05 #1698
-
22 July 2017, 13:12 #1699
-
22 July 2017, 13:13 #1700
-
22 July 2017, 19:44 #1701
I need a DE SOCOM Can. Looks good.
-
22 July 2017, 19:54 #1702
-
22 July 2017, 19:59 #1703
HK11 isn't belt fed.
It's a US made clone of the HK23E. Here's the other side with the belt box removed and the feed mechanism swung down.
Very interesting guns, considering their lineage. An early version of the 23E was submitted as the XM262 for the SAW trials and almost won. The E (export) models can swap between 5.56 and 7.62 in a couple minutes by changing the bolt group, barrel, and feed mechanism.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
24 July 2017, 23:24 #1704
-
25 July 2017, 10:26 #1705
Plinking 10" steel plates at 550 yards with a 3x magnifier on a belt fed machine gun. Fun!
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
25 July 2017, 20:06 #1706
-
26 July 2017, 08:05 #1707Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
26 July 2017, 09:47 #1708
You just need to come down here and shoot it, along with some of the other fun stuff my friends own.
One of my buddies running the E:
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
26 July 2017, 15:46 #1709
-
1 August 2017, 20:20 #1710