Dillon XL 650, accessories, and reloading components.

[Slippers]

I no longer have the time to reload so I'd rather free up some space in my house and convert this stuff to factory ammo. The main press and hazmat stuff is difficult to ship, so would prefer a buyer in NC or surrounding states that is willing to meet half way (I'm in Raleigh). Willing to ship reloading components and smaller items, of course.

This was run with four tool heads, two for 223, two for 308. One of each pair is for brass processing with decap/swage it/size/trim with the 1200B. Then after tumbling, the other tool head in the pair was used to prime, tiny neck expand, powder charge, seat bullet, and light factory crimp. To change between 223 and 308 the powder drop would be moved to the other powder die, and the 1200B trimmer would be moved to the other rapid trim die. You'd also have to swap out the small rifle to large rifle components on the press like the primer feed, case feeder plate, etc.

If you want the whole setup (with or without components), then I'd do a hefty discount purely based on convenience. Otherwise I'm willing to part it out to some extent, such as the case feeder, trimmer, etc. If you want the press plus some stuff, that's fine, too. Everything is in very good condition; I take care of my gear. Photos available for serious buyers.

Prices include shipping if relevant. PayPal only.

Press & dies
Dillon XL 650 complete progressive press w/ 223 rem kit, powder drop, etc. Includes Inline Fabrication Ultramount Riser, second head, and 223 dies listed below $600
Dillon XL 650 308 conversion kit $70 (new) if purchased with 650 includes 308 dies listed below
Dillon XL 650 casefeeder 110 volt w/ small and large rifle casefeed plates $220 (new)
Dillon 1200B case trimmer $240
Dillon rapid trim die 223 rem $40
Dillon rapid trim die 308 win $50 (new)
Dillon XL 650 toolhead x2 $30 each (new)
Swage It XL 650 Primer Pocket Swager - small and large rifle primer $110 (new)

Lee universal decapping die (2 dies plus 2 spare pins)
Lee factory crimp die 223 rem
Lee factory crimp die 308 win (new)
Lyman M neck expander die 223 rem
Lyman M neck expander die 308 win (new)
Hornady Series I custom grade seater die 22 cal
Hornady Series I custom grade seater die 30 cal (new)


Tumbler stuff
Frankford Arsenal Platinum Series rotary tumbler with stainless media $160
RCBS rotary media separator $30
Harbor freight 5 tier food dehydrator for drying brass (free with tumbler if face to face)

Powder
Hodgdon H335 8 lb new canister x1 $150
Hodgdon H335 1 lb new canisters x4 $20 each
IMR 8208 XBR 8 lb new canister x4 $170 each

Bullets
Nosler CC .224 77 gr x1950 (new, not in original box) $160 per 1,000
Nosler CC .308 175 gr x4000 (new, not in original box) $200 per 1,000

Brass
2000 mil once fired 5.56 TAA (general dynamics) $100