Results 1 to 9 of 9
Thread: Leupold problem
-
3 March 2018, 21:57 #1
Leupold problem
Has anybody ever experienced this before? I posted about that 6.5 Grendel build I just wrapped up in the build section. Well. When I started shooting on Monday, the reticle seemed a little off on the X axis. Okay. Something must have been off on the bench levelness or something tweaked when I tightened it down. No big deal. Went to level it out just now and after 10min of loosening, leveling, tightening, checking level again, so on and so forth, THIS is what we have. Granted, I am not the owner of the gun, but this kinda pisses me off actually. Anybody seen this out of Leupold or any other manufacturer? Thank you.
Sent from my iPhone using Tapatalk-NRA Life Member
-Harleys. Mustangs. When in doubt, throttle out!
-
4 March 2018, 03:44 #2
Best bet is going to be to contact Leupold. Personally never dealt with that issue or Leupold. But I’ve heard of cases of that issue from a number of manufacturers. You didn’t overtorque the rings did you?
-
4 March 2018, 05:02 #3
Not that I know of.
Sent from my iPhone using Tapatalk-NRA Life Member
-Harleys. Mustangs. When in doubt, throttle out!
-
4 March 2018, 05:14 #4
I don’t think overtorquing would give you that issue specifically anyway. Just a thought.
From what I understand Leupolds warranty is pretty good.
-
4 March 2018, 05:43 #5
My first kahles k16i had a canted reticle, although not as bad as that. Definitely unacceptable, but Leupold will fix or replace it.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
4 March 2018, 06:20 #6
After doing some reading around, this is way more of a common problem than I ever would have thought. Especially from Leupold. With a 3% tolerance of cant. WHAT?! So. I’m gonna check the date on the scope order, and try Optics Planet first for a replacement. If no go, I’ll get a hold of Leupold.
Sent from my iPhone using Tapatalk-NRA Life Member
-Harleys. Mustangs. When in doubt, throttle out!
-
4 March 2018, 07:08 #7
Sorry you are having this problem. I have several of their products and over the last forty-plus years I have had two issues with Leupold scopes. Both times their Customer Service took care of the problem with speed and at no charge other than shipping to them. If Optics Planet can't / won't help, Leupold will.
Keep us posted on your progress.NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
4 March 2018, 07:18 #8
Leupold claims up to 3* is acceptable. That’s why it’s acceptable to me to NEVER buy Leupold again. 3k Mk6 and you want to talk about what’s acceptable?
But that appears to be over 5-6* at least.
It could also be a broken erector spring. Had a few Vortex optics that happened to.
Does the amount of cant change when moving the turrets?Last edited by SINNER; 4 March 2018 at 07:32.
-
4 March 2018, 07:46 #9