Results 1 to 9 of 9
  1. #1
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0

    Vortex Strike Eagle 1-8x24 review

    I got interested in the LPVO’s recently after having some time with the Mercon Mk1 1-6x and a Steiner PX4i 1-4x. I wondered just how accurate these online reviews were, since my experience with the former seemed to drastically differ from a paid reviewer (surprise surprise), so I wanted to see how it compared to something in the sub $5-600 range. Side note, the Mercon was VERY clear from 3-6x and was very similar to the Vortex Razor HD II in terms of the large wall-to-wall sight picture at 6x. My other gripes were too glaring for me to trade off the bad for the good.

    Moving on, the Strike Eagle (16.5oz) is just under the upper end of the weight range I feel is ideal. With the Vortex SPR mount (6.7oz), 23.2oz is fairly hefty for the type of rifle I envision this optic on. The Aero Precision Mount is right around 3oz and is a lighter weight alternative, getting in under my high water mark of 20oz.

    A cursory inspection shows that the finish is even and in good shape, I don’t see any floaters or imperfections in the glass, the adjustment knobs have good tactile clicks with 1/2 MOA increments (not a precision scope, so this is not surprising), and the illumination dial is stout enough that it likely won’t turn on and die in a rifle case. Underneath the windage cap there’s a holder for a spare battery which is convenient:



    You can see the little slot on the elevation turret at the 10 position. This is for a screwdriver to rotate the number dial around to match the 0 with the reference mark on the threads. This is a simple solution and I have to say, it’s a little awkward to perform. I like Vortex’s spring loaded “lift to disengage” return to zero turrets like on the Viper 6.5-20x platform.

    Mounted:



    Range time

    I wanted to use off the shelf ammo with this review so my handloads wouldn’t skew the results. I first zeroed it at 100 yards for the benchmark test then zeroed at 50yds because the manual had a 50/200yd zero with a 1st holdover drop for 300yds.

    At 100 yards, the center dot is still a decent size that it’s not blocking the target. Your POA is easily repeated. Based on the first photo, I’ll bring up the illumination. Vortex claims 150 hours of battery life but doesn’t specify at what strength, from 1 to 11. Once again, illumination on this LPVO was an issue. Even at 11, in full sun, it was enough to give you some contrast from the target but it wasn’t enough. The low settings 1&2 were pretty useless even in the dark of night.


    Targets at 100 yards:

    1x:


    4x:


    8x:



    There was a small amount of distortion/light bending on 1x, but not nearly as significant as I was expecting. I have experienced more distortion on higher priced LPVO’s without a doubt. The “ring” in the optic coupled with the 4 MOA dot make a decent quick kill reticle for close quarters work but the body of the scope that projects around the ocular lens can obstruct the shooters view. I found it best to use both eyes open to mitigate that, but not everyone based on their vision can do this.

    As to be expected, 8x has got some haze to it that is unavoidable (thus far) in 1-6/8x magnification entry level scopes. It is sufficient for positively IDing targets and making kills (on paper, people, or deer/hogs) at 300 yards (maybe further, my range maxes out at 300)

    It doesn’t have a raised bump or integrated throw lever, and it really needs an aftermarket one, if only to help with quick adjustments without having to look.

    I zeroed at 100yds like I previously mentioned with good results:


    The BDC2 reticle in the scope is designed for use with 77gr bullets. It also says the 50/200 zero is ideal and the hash marks will translate to the prescribed yardage. I rezeroed at 50 yards and moved a target to 200yds and aimed directly at a POA reference made from target pasters.

    Two things became apparent. At 200yds, the reticle is now too large for precise shooting. I fired two three round groups, with a brief pause due to a gust of wind really rocking the paper. The groups were high by about 2”. The wind pushed my second group a tad but all in all, I was pleased with my shooting.

    I repeated the previous paragraph at 300 yards. This was tricky.



    As you can see, the center dot in the reticle and the crosshairs are substantially larger than the POA reference. Based on the manual, with the 50/200 zero, the first stadia line should be on the money. I knew center POA/POI ended up high at 200, but I wanted to do it by the book and not the Kentucky method.

    Again, POI was high, this time around 6” over POA. This could be due to several factors (see below photo)



    My ammo could be moving faster than that which was used for the scope’s calibration but I’m leaning more towards my next guess.

    Due to holding over versus dialing the elevation, my holds were likely inconsistent due to the thickness of the reticle compared to the the target

    PART 2 (Short update about low light usage)

    I wanted to do some night testing to see what worked and what didn’t.

    Settings 1 & 2 were visible but only just so. I could see use on these settings when hunting and you don’t want the reticle messing with your visibility on target

    Setting 1 in my garage


    Settings 6/7 were good when used with white light when there’s a lot of reflected light


    I read about the 1-6x Strike Eagle having some light spill out the front in the dark when on Setting 11... well, setting 11 in the dark would be blinding from the shooters perspective, and I think they added something on the inside to help mitigate light emitting from the front on the eight power model, because I could see the light when I put my eye close to the objective and made a point to seek it out, but otherwise it was on par with other large illuminated reticles I’ve used.



    Overall thoughts:

    This is a solid scope that’s backed by Vortex’s standard lifetime warranty. The intended user is someone who’s on a budget, and I don’t mean that negatively at all, or someone who wants a capable scope who isn’t living the Razor HD 2 lifestyle. For the price point, with a scope that isn’t cheaply made has to have a sacrifice somewhere and getting that extra bit of magnification in there, the clarity of the image does suffer. I’m not saying avoid the scope, but be aware when you are considering it and see if that’s an acceptable compromise.

    These scopes do go on sale, and as of this posting was available online with a mount for $280. I believe at that price point what you get IS a good value, and I would feel fine recommending the purchase then. But for $500...I don’t think I could tell someone on the fence about it to make the buy. A higher quality 1-4 at the same price would be the better buy despite the lesser magnification.

    Bottom line: while this scope may not be for everyone, it does have a place and will allow a lot of people to outfit their rifles without going over budget (especially if you buy it on sale!)

  2. #2
    Join Date
    Apr 2012
    Location
    N. KY
    Posts
    3,055
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by Former11B View Post
    I got interested in the LPVO’s recently after having some time with the Mercon Mk1 1-6x and a Steiner PX4i 1-4x. I wondered just how accurate these online reviews were, since my experience with the former seemed to drastically differ from a paid reviewer (surprise surprise), so I wanted to see how it compared to something in the sub $5-600 range. Side note, the Mercon was VERY clear from 3-6x and was very similar to the Vortex Razor HD II in terms of the large wall-to-wall sight picture at 6x. My other gripes were too glaring for me to trade off the bad for the good.

    Moving on, the Strike Eagle (16.5oz) is just under the upper end of the weight range I feel is ideal. With the Vortex SPR mount (6.7oz), 23.2oz is fairly hefty for the type of rifle I envision this optic on. The Aero Precision Mount is right around 3oz and is a lighter weight alternative, getting in under my high water mark of 20oz.

    A cursory inspection shows that the finish is even and in good shape, I don’t see any floaters or imperfections in the glass, the adjustment knobs have good tactile clicks with 1/2 MOA increments (not a precision scope, so this is not surprising), and the illumination dial is stout enough that it likely won’t turn on and die in a rifle case. Underneath the windage cap there’s a holder for a spare battery which is convenient:



    You can see the little slot on the elevation turret at the 10 position. This is for a screwdriver to rotate the number dial around to match the 0 with the reference mark on the threads. This is a simple solution and I have to say, it’s a little awkward to perform. I like Vortex’s spring loaded “lift to disengage” return to zero turrets like on the Viper 6.5-20x platform.

    Mounted:



    Range time

    I wanted to use off the shelf ammo with this review so my handloads wouldn’t skew the results. I first zeroed it at 100 yards for the benchmark test then zeroed at 50yds because the manual had a 50/200yd zero with a 1st holdover drop for 300yds.

    At 100 yards, the center dot is still a decent size that it’s not blocking the target. Your POA is easily repeated. Based on the first photo, I’ll bring up the illumination. Vortex claims 150 hours of battery life but doesn’t specify at what strength, from 1 to 11. Once again, illumination on this LPVO was an issue. Even at 11, in full sun, it was enough to give you some contrast from the target but it wasn’t enough. The low settings 1&2 were pretty useless even in the dark of night.

    Targets at 100 yards:

    1x:


    4x:


    8x:


    As to be expected, 8x has got some haze to it that is unavoidable (thus far) in 1-6/8x magnification entry level scopes. It is sufficient for positively IDing targets and making kills (on paper, people, or deer/hogs) at 300 yards (maybe further, my range maxes out at 300)

    It doesn’t have a raised bump or integrated throw lever, and it really needs an aftermarket one, if only to help with quick adjustments without having to look.

    I zeroed at 100yds like I previously mentioned with good results:


    The BDC2 reticle in the scope is designed for use with 77gr bullets. It also says the 50/200 zero is ideal and the hash marks will translate to the prescribed yardage. I rezeroed at 50 yards and moved a target to 200yds and aimed directly at a POA reference made from target pasters.

    Two things became apparent. At 200yds, the reticle is now too large for precise shooting. I fired two three round groups, with a brief pause due to a gust of wind really rocking the paper. The groups were high by about 2”. The wind pushed my second group a tad but all in all, I was pleased with my shooting.

    I repeated the previous paragraph at 300 yards. This was tricky.



    As you can see, the center dot in the reticle and the crosshairs are substantially larger than the POA reference. Based on the manual, with the 50/200 zero, the first stadia line should be on the money. I knew center POA/POI ended up high at 200, but I wanted to do it by the book and not the Kentucky method.

    Again, POI was high, this time around 6” over POA. This could be due to several factors (see below photo)



    My ammo could be moving faster than that which was used for the scope’s calibration but I’m leaning more towards my next guess.

    Due to holding over versus dialing the elevation, my holds were likely inconsistent due to the thickness of the reticle compared to the the target

    (To be continued...)
    Damn, dammit, right after I just bought a 1x6
    NRA Life Member
    Deplorables Life Member
    Bible and Gun Clinger
    Filthy Stinking Wal Mart Shopper


  3. #3
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Nice write up. Any plans to take it out further than 100?

  4. #4
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by UWone77 View Post
    Nice write up. Any plans to take it out further than 100?
    I shot it at 200 and 300yds, but only a couple groups at each distance. I only had a 50rd box of the factory ammo. I shot two 3 round groups and the biggest one at 300yds was about 5”. Not bad for a “combat” non precision type of scope

    EDIT*Just found another sixty rounds of it I had stuffed away in two mags. Looks like I can repeat tests with the same variables**

    I just hit 2000 rounds on the Ultramatch Mod 2 16” also. Still going strong and I just wound up on a nice Varget and 75gr ELD load in the 224 Valkyrie. Yesterday was a good day

  5. #5
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Nice write up former11b. That took some time.

    So I seen palmetto blowing these out for 280 shipped for scope and vortex mount.. is it worth it for that amount of money vs 400 normally?

  6. #6
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by mustangfreek View Post
    Nice write up former11b. That took some time.

    So I seen palmetto blowing these out for 280 shipped for scope and vortex mount.. is it worth it for that amount of money vs 400 normally?
    For $280, yes. Not for $400 though. I’d spend the extra $100 and get a PX4i Steiner even with the lower magnification, it’s a better optic

  7. #7
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Gotcha..

    Ya psa just blew them out for 280 shipped with their mount..

  8. #8
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Wrong thread whoops

  9. #9
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    300 yds with CBC 77gr ammo. Only had a few rounds left from my initial box so I wanted to retest at distance with it.

    And this is using my 16” Ultramatch Mod 2 barrel. Groups aren’t too bad for a 16” barrel and an 8 power optic if I do say so myself




    Last time I was shooting a high. My POA was too small for the reticle, so I was basically guessing where the dot was in relation to dead center of the holdover.

    This time I drew a much larger circle and was just a couple inches low.

    The instructions say: “for most popular rifles and loads, the sub crosshairs will provide accuracy within 0-3” of your aiming point.”

    Well....it does exactly what it says it will.

    This is a scope designed for making hits/kills, NOT precision accuracy work. You could use this to shoot a hog or a deer, or even a bad guy, but I wouldn’t try to shoot a bad guy with a hostage, if that analogy makes sense

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •