Results 1 to 11 of 11
  1. #1
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0

    Midwest Industries Ruger PC Products

    The Ruger PC9 will now be more customizable than ever with the upgrades we have been working on.

    The Midwest Industries PC9 Combat Rail (MI-CRPC9) is a light weight, slim profile upgrade that installs with ease with the provided mounting bolt and 5/32 allen wrench.

    The handguard is 12” in length and features 8 sides of M-LOK slots. It has a total of three built in QD sling points with one on each side and a third on the bottom to allow for a more traditional way of rifle carry.

    The 12” handguard has a thin outside diameter of 1.5” and weighs only 10.9 oz

    With a 6061-aluminum construction and type 3 hard coat anodized finish this handguard will last a lifetime and has the warranty to back that up.

    A five-slot polymer M-LOK rail is included.

    This handguard has a patent pending.

    With the addition of the handguard's front QD sockets comes the need for a place to sling up in the rear of the stock. With this need comes our stock plate (MI-PC9QDSP).

    This plate is super easy to install with the factory hardware, weighs just 3.2 oz and has three build in QD sockets with one on each side and a third on the bottom. This product, like the handguard, is constructed of 6061 aluminum and has a type 3 hard coat anodized finish as well as a lifetime warranty.

    Not to be left out, we also looked at the bolt handle and saw room for improvement.

    With a slightly longer than factory length and a knurled exterior finish our bolt handle (MI-PC9BH) will not slip from your fingers when used to charge or clear your rifle.

    This handle is constructed of 4140 steel and is coated with a mag phosphate finish. This handle installs with the factory hardware.

    These products, like everything we make, is putting Americans to work by being 100% made in the USA and is backed by our lifetime warranty.

    Retail Pricing in USD:
    MI-CRPC9 - $169.95
    MI-PC9QDSP - $39.95
    MI-PC9BH - $19.95








    Last edited by Midwest Industries; 20 March 2019 at 13:33.

  2. #2
    Join Date
    Nov 2007
    Location
    East of Cleveland, OH
    Posts
    265
    Downloads
    4
    Uploads
    0
    DAMN! That rail improves the looks of the gun by about 150%, at least.

  3. #3
    Join Date
    Sep 2014
    Location
    S. Carolina
    Posts
    679
    Downloads
    0
    Uploads
    0
    Damn when can we get that in that configuration. I don't wanna have to swap all that out. What an improvement looks amazing

  4. #4
    Join Date
    Sep 2014
    Location
    Texas
    Posts
    5,854
    Downloads
    2
    Uploads
    0
    That does look very good.

  5. #5
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0
    Here are a couple more views:





    Last edited by Midwest Industries; 22 March 2019 at 08:35.

  6. #6
    Join Date
    Nov 2007
    Location
    East of Cleveland, OH
    Posts
    265
    Downloads
    4
    Uploads
    0
    Well heck, now I wish I hadn't sold mine...

  7. #7
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0
    Pre orders will begin April 22nd!

  8. #8
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0
    A lot of time and thought went into this handguard.
    We have incorporated three QD sling attachment points as well as a place to thread in a stud for your Uncle Mikes style sling.
    Another feature we offer is a row of M-LOK slots along the top edge which allows for mount lights for night/ indoor shooting or hunting.
    It was our goal to make a handguard that was as functional as possible, as well as offer something aesthetically pleasing.




  9. #9
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0

  10. #10
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0

  11. #11
    Join Date
    Dec 2011
    Location
    Waukesha WI
    Posts
    208
    Downloads
    0
    Uploads
    0
    Our side mount for Aimpoint micro sights and clones is now shipping!

    https://www.midwestindustriesinc.com.../mi-pc9t1m.htm


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •