Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 48
  1. #31
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    I like those Tac ops.

    Gear head- another option and one I would look at if your not wanting to drop a grand plus. I’ve had a few Ruger 1911’s and with a few upgrades there a great buy. These talo night watchmen have been a want. Can be found for 700’ish.

    Not mine, just stole the pic
    Attached Images Attached Images

  2. #32
    Join Date
    Dec 2012
    Location
    Front Range of CO
    Posts
    343
    Downloads
    1
    Uploads
    0
    Ugh. Stop with the pictures. The Sig competes directly with my Specialist as a rail-and-well gun (I think I'll keep the DW, heh heh) and the Ruger is basically in the same space as my Loaded Springer (smooth frontstrap, night sights, traditional slide). I might prefer that Ruger's finish more than the notoriously soft Parkerizing on the Loaded.

    So I don't need either cause I've got those bases covered......but I still want both of them. So please, stop it :)

    As an aside, more and more I move towards "no front serrations" on 1911s. The Springfield completely shredded a couple of unlined holsters and I don't use the serrations for press-checks on 1911's very often (ever???).

  3. #33
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    2,219
    Downloads
    2
    Uploads
    2
    Quote Originally Posted by RiverRat View Post
    Ugh. Stop with the pictures.
    Nope, not until I put up my Ruger ...

    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  4. #34
    Join Date
    Dec 2012
    Location
    Front Range of CO
    Posts
    343
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by Jerry R View Post
    Nope, not until I put up my Ruger ...
    Dang it.

    A Ruger with ball mill end cuts and and front strap checkering? That magwell doesn't look factory and those grip panels sure aren't. Not really seeing a manufacturer's stamp on the slide. I see a few other bits and pieces have changed too

    Someone had some work done - it's barely a Ruger now :)
    Last edited by RiverRat; 5 April 2019 at 15:15.

  5. #35
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    So.....did you go shopping yet? Whatcha get

  6. #36
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Was looking at this thread this week thinking about picking up a 1911 for myself (traditionally a Glock guy). Stumbled upon a used SA TRP for $1,100 at one of the local shops and decided to bring it home. This is my first 1911 and .45



    A little wear on the expected locations. Prior owner obviously shot it.





    The only thing I don't care for is the sights, but I got over that once I learned that I can get a rear U-notch / front fiber optic set of sights from Harrison Custom ( https://shop.harrisoncustom.com/hd-0...ice-rear-sight )

  7. #37
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    2,219
    Downloads
    2
    Uploads
    2
    Quote Originally Posted by BoilerUp View Post
    I can get a rear U-notch / front fiber optic set of sights from Harrison Custom
    Just my opinion, but John Harrison is the best when it comes to 1911 custom stuff. He did all the work on my Ruger shown above - except the grips.
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  8. #38
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Grats on the first 1911

  9. #39
    Join Date
    Sep 2014
    Location
    Broadway, VA
    Posts
    78
    Downloads
    0
    Uploads
    0

    Need some help from the masses please!

    Quote Originally Posted by mustangfreek View Post
    So.....did you go shopping yet? Whatcha get
    I have not. Sadly. Haha.

    *dead thread revival for sure*

    I have the money now. Some things happened, not the way I planned, or wanted, things came up, etc etc. Life happens. Adulting sucks. Lol.

    So. Been doing a LOT of research. Searching. Comparing. More looking. More research.

    A shop a couple hours away from me, actually had a Dan Wesson Specialist the other month when I was there. I wanted to handle it and check it over, but, nobody would assist me. Got on DW’s website and started perusing. Why does it bother me so much that they only offer a 5yr warranty on their guns, where all these other companies offer lifetime.

    I still want a .45. I still want railed. These two, I believe are my top choices. In this order.






    The bad news....the S&W has been completely discontinued. So. I’ll have to find an an NOS gun somewhere that hasn’t been plucked yet by anyone, and I have managed to find a few. So. Thats a plus. The SA...I just don’t really want a gun that everybody else has. Haha. I know, weird. So. Does anybody know of or have anything to say negative about the TA E-series. With those scallops, I think it’s one of the most beautiful 1911’s I’ve ever seen. I know I didn’t list a TRP. I would have no problem spending the extra dough, I just don’t like the rear target sight on it instead of a carry-type sight. Why did they do that anyway?!

    I know quite a few people have said Sigs as a go-to as well. I’m looking at the Tac Ops currently on their website, but only a 10mm. No .45? Uhh, what!? BUT. I DO like the fact that it comes with 4 mags from factory. That’s pretty badass!

    I’d like to be able to order one or buy one in person this weekend if I can find the right one.

    Opinions?


    Sent from my iPhone using Tapatalk
    -NRA Life Member

    -Harleys. Mustangs. When in doubt, throttle out!

  10. #40
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    2,219
    Downloads
    2
    Uploads
    2
    Quote Originally Posted by RiverRat View Post
    Dang it.

    A Ruger with ball mill end cuts and and front strap checkering? That magwell doesn't look factory and those grip panels sure aren't. Not really seeing a manufacturer's stamp on the slide. I see a few other bits and pieces have changed too

    Someone had some work done - it's barely a Ruger now :)
    Slide, Frame, and Barrel are Ruger. The rest ... not so much.
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  11. #41
    Join Date
    Sep 2014
    Location
    Broadway, VA
    Posts
    78
    Downloads
    0
    Uploads
    0
    Well. I finally did it!! Made up my mind. Picked one. Ordered it. Picked it up today. I am completely enamored with it and beside myself. This thing is so beautiful. And feels so good. NOW I know and see the difference between a low end, and a high end 1911. I’ll never be the same after this. Lol.

    (Picture heavy)















    Sent from my iPhone using Tapatalk
    -NRA Life Member

    -Harleys. Mustangs. When in doubt, throttle out!

  12. #42
    Join Date
    Dec 2009
    Posts
    2,101
    Downloads
    0
    Uploads
    0
    Very, very nice.
    -One Nation, Under God

    -"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler

  13. #43
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Great looking DW. Totally Jelly.

  14. #44
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    2,219
    Downloads
    2
    Uploads
    2
    Nice 1911.
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  15. #45
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Purdy pistola, gearhead. So, of the myriad choices available, what drew you to this one?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •