Results 1 to 7 of 7
Thread: WTT Buffer Tubes
Threaded View
-
8 October 2019, 14:53 #1
WTT Buffer Tubes
WTT Vltor A5 or LMT Buffer Tube for a 7075 carbine buffer tube.
I built a rifle for my cousin who is fresh out of the Marines. Test fired the upper on a few lowers to make sure all was well before I give it to him, and discovered it seems to like a carbine system with an H1 better than the Vltor A5 I put on it.
Problem is the only carbine tube I have laying around is an LMT, and on that particular lower there’s some tolerance stacking that won’t let it work.
I have one other, but it’s a POS with a rough interior that feels and sounds like a spoon over a cheese grater and I’m not willing to use that on a gun that isn’t mine. ESPECIALLY on a gun that isn’t mine.
So, I’ll trade either the Vltor or the LMT, whichever you want, for a good, smooth inside, 7075 carbine RE. As long as it isn’t from Strike Industries.
ETA:
Also, if you want the Vltor Tube, I’ve got an A5H1 buffer I’d trade for an H1.Last edited by Aragorn; 8 October 2019 at 14:58.
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler