Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2015
    Posts
    119
    Downloads
    0
    Uploads
    0

    Observations On The Effect Of Parallax Error When Shooting With An Aimpoint Comp M5 And A Trijicon

    Observations On The Effect Of Parallax Error
    When Shooting With An Aimpoint Comp M5 And A Trijicon MRO








    Some manufacturers of red-dot sights have made claims that their red-dot sights are “parallax free“. Most of us are already aware that this is simply not true at all distances. Inherent parallax error with a red-dot sight is typically greatest at CQB distances (MOA wise) and decreases as the distance to the target increases.

    In this ballistic exercise we’ll be looking at the amount of parallax error occuring during objective, controlled, live-fire testing at the distances of 7 yards, 15 yards, 25 yards and 50 yards when shooting with an Aimpoint Comp M5 and a Trijicon MRO mounted on a precision AR-15. The Aimpoint Comp M5 has a 2 MOA red dot, as does the Trijicon MRO.

    All shooting for this exercise was conducted from my bench-rest set-up using one of my precision AR-15s. This AR-15 has a 20” Lothar
    Walther barrel with a 223 Wylde chamber and 1:8” twist and it routinely produces 0.75 MOA 10-shot groups at 100 yards (with a high magnification scope). The ammunition used for this exercise was one of my match-grade hand-loads topped with the Sierra 52 grain MatchKing. Wind conditions on the range were monitored using a Wind Probe. The set-up was very similar to that pictured below.








    The barrel . . .
















    10-shot group at 100 yards . . .






    The Wind Probe . . .







    The Details


    The methodology for this ballistic exercise was as follows . . .

    Shooting from the bench-rest set-up with the Aimpoint Comp M5 atop the precision AR-15 at the initial distance of 7 yards, an 8-shot control group was fired with the red-dot centered in the sight window. Next, an 8-shot parallax test-group was fired in the following manner:

    2 shots fired with the red-dot positioned in the extreme 12 o’clock position of the sight window.

    2 shots fired with the red-dot positioned in the extreme 3 o’clock position of the sight window.

    2 shots fired with the red-dot positioned in the extreme 6 o’clock position of the sight window.

    2 shots fired with the red-dot positioned in the extreme 9 o’clock position of the sight window.


    Additional 8-shot parallax test-groups were then fired sequentially at 15 yards, 25 yards and 50 yards in the manner described above. This simple methodology is illustrated in the two pics shown below. The solid black dot on the target was the point-of-aim.



    The 8-shot control group at 7 yards.







    The 8-shot parallax test-group at 7 yards.








    Aimpoint Comp M5 Results

    The 8-shot control group fired at 7 yards had an extreme spread of 0.039”, which at 7 yards is 0.53 MOA. The extreme spreads of the parallax test-groups are shown in the table below.









    Trijicon MRO Results





    I repeated the ballistic exercise described above using a 2nd-generation Trijicon MRO with a 2 MOA red dot. The results are shown in the table below.






    I also conducted the 50 yard portion of the parallax test using another 2nd-generation Trijicon MRO with a 2 MOA red dot. The results were nearly identical to that of the first MRO. The extreme spread of the 8-shot parallax test-group was 7.46”, which at 50 yards is 14.3 MOA.



    Comparisons

    The tables and graphs below show the results from both the Aimpoint Comp M5 and the Trijicon MRO, side-by-side, for comparison.

    Results in minutes of angle . . .










    Results in inches . . .










    …..
    Last edited by Molon; 15 March 2020 at 07:19.

  2. #2
    Join Date
    Feb 2012
    Posts
    607
    Downloads
    0
    Uploads
    0
    Excellent post as always Molon.

    Have you done similar test with other red dot/holo sights for comparison?
    FFL 07/ NFA 02
    TWN Certified Hydro Dipper

  3. #3
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Very informative. Thanks, Molon!

  4. #4
    Join Date
    Mar 2015
    Posts
    119
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by VIPER 237 View Post
    Excellent post as always Molon.

    Have you done similar test with other red dot/holo sights for comparison?
    Yes, Stay tuned.

  5. #5
    Join Date
    Mar 2015
    Posts
    119
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by VIPER 237 View Post

    Have you done similar test with other red dot/holo sights for comparison?
    I updated the original post with results from the Trijicon MRO.

    ...

  6. #6
    Join Date
    Mar 2015
    Posts
    119
    Downloads
    0
    Uploads
    0
    Aimpoint T2 Parallax Error At 50 Yards








    An 8-shot parallax test-group fired from 50 yards using an Aimpoint T2 had an extreme spread of 0.907", which at 50 yards equates to 1.7 MOA.







    ...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •