Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2009
    Posts
    863
    Downloads
    0
    Uploads
    0

    Forward Controls Design OPF-G, RMR

    OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) It is incompatible with G40 that uses Set 02.

    We like the Glock MOS concept, even if we find the factory MOS adapter plates could use some help. Standards, commonality, availability of parts are all good things. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability.

    OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be.

    OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives:
    1. Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
    2. Eliminate the need to use an additional sealer plate.
    3. Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
    4. Adapter plate is to be machined in steel.

    OPF-G, RMR accomplishes all of the goals outlined above. OPF-G, RMR's thickness is unchanged from that of the Glock MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights.

    As Trjicon RMR and SRO share the same mounting footprint, OPF-G, RMR is also compatible with SRO. However, due to the precise fit of the front and rear recoil lugs/fences, OPF-G, RMR is incompatible with Holosun sights. OPF-G, H will be available as a separate product.

    OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet.

    Weight: 0.83oz
    Plate to slide torque value: 13 to 15in/lb
    Sight to plate torque value: 13in/lb

    Proudly designed and made in the USA.

    NOTE: this version is incompatible with G40 (10mm) that uses Glock MOS Adapter Set 02.

    https://www.forwardcontrolsdesign.co...RMR_p_224.html

    Name:  IMG_5092.jpg
Views: 655
Size:  47.9 KB
    Last edited by Duffy; 10 March 2020 at 10:50.

  2. #2
    Join Date
    Jul 2008
    Location
    DFW, Texas
    Posts
    461
    Downloads
    0
    Uploads
    0
    That looks great!!


    Again, well done.
    "I have never heard anyone say after a firefight that I wish that I had not taken so much ammo.", ME

    "Texas can make it without the United States, but the United States can't make it without Texas !", General Sam Houston

  3. #3
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Roger, are the Gen4/5's the same dimensions?

    Well done, will be purchasing one.

  4. #4
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    Quote Originally Posted by UWone77 View Post
    Roger, are the Gen4/5's the same dimensions?

    Well done, will be purchasing twenty one.
    Fixed!
    There's no "Team" in F**K YOU!

  5. #5
    Join Date
    Jan 2009
    Posts
    863
    Downloads
    0
    Uploads
    0
    4 and 5 plates are the same :)

  6. #6
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Joelski View Post
    Fixed!
    I only have 2 MOS Glocks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •