Page 2 of 2 FirstFirst 12
Results 16 to 24 of 24
  1. #16
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    14,283
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by BoilerUp View Post
    Isn't the 308 buffer the short stubby one? If so, that should only be used in the AR15 carbine length buffer tubes as those are too short for the AR10/A5 extensions. I made the mistake once of running a 308 buffer in a AR10 extension and ended up damaging the threads on the rear of the lower receiver from bcg over travel.

    That said, in principle I think you are right as the .308 buffer is about the same weight as an H buffer, so I'd probably start with an H instead of the H3.
    Ahhhh good catch. I didn't see he was using an RE10 receiver extension.

    And you are correct. DO NOT USE the short buffer on anything other than an AR15 extension.

  2. #17
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,274
    Downloads
    1
    Uploads
    0
    Yep, went thru this confusion also. It’s now engraved in my brain

    Standard ar15 length is shorty 308 buffer

    I use the full armalite kit with their A5 length tube, spring and H3. It was 65 shipped last year when I got it.

    I tried a H2 and it was noticeably more violent.. h3 is on now and could almost use more

  3. #18
    Join Date
    Apr 2014
    Location
    Twin Cities
    Posts
    1,050
    Downloads
    2
    Uploads
    0

    UPDATE

    Happy day at the range. Sprinco red spring with the same H3 buffer solved the problem. For some reason Pmags all locked back on a single round while a Lancer .308 would not. Stiffer metal feed lips? Opening the AGB one click fixed that. Now runs good with and w/o Recce 7. Had to zero with a 3-9 scope as my 18x ran out of windage adjustment. Need more fine tuning, but I’m optimistic.

    More fun was getting the 16” coupon Ultramatch dialed in. About an inch difference POI with the Recce 5 which I zeroed using a 2.5-12x. Met another oldster who hadn’t touched an AR since his Air Force M16 nearly 50 years ago and had never shot with a silencer. First time - seven shots with four touching in about a 1.5 inch group with Wolf Gold! Range was closing so I’ll go for my groups another day and with better ammo.
    “What in the world is a moderate interpretation of a constitutional text? Halfway between what it says and what we'd like it to say?" -Antonin Scalia

  4. #19
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    1,510
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Uffdaphil View Post
    Happy day at the range. Sprinco red spring with the same H3 buffer solved the problem. For some reason Pmags all locked back on a single round while a Lancer .308 would not. Stiffer metal feed lips? Opening the AGB one click fixed that. Now runs good with and w/o Recce 7. Had to zero with a 3-9 scope as my 18x ran out of windage adjustment. Need more fine tuning, but I’m optimistic.

    More fun was getting the 16” coupon Ultramatch dialed in. About an inch difference POI with the Recce 5 which I zeroed using a 2.5-12x. Met another oldster who hadn’t touched an AR since his Air Force M16 nearly 50 years ago and had never shot with a silencer. First time - seven shots with four touching in about a 1.5 inch group with Wolf Gold! Range was closing so I’ll go for my groups another day and with better ammo.
    Glad you got it running with a simple change.

    I shoot a lot of Wolf Gold and love it, but I wouldn't expect 1.5 MOA from it. Nice.

  5. #20
    Join Date
    Apr 2014
    Location
    Twin Cities
    Posts
    1,050
    Downloads
    2
    Uploads
    0
    Quote Originally Posted by BoilerUp View Post
    Glad you got it running with a simple change.

    I shoot a lot of Wolf Gold and love it, but I wouldn't expect 1.5 MOA from it. Nice.
    I wouldn’t expect that with me shooting either. My eyes are terrible. My 77 grain is reserved for this gun in future.
    “What in the world is a moderate interpretation of a constitutional text? Halfway between what it says and what we'd like it to say?" -Antonin Scalia

  6. #21
    Join Date
    Nov 2010
    Location
    FL
    Posts
    2,372
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Uffdaphil View Post
    Happy day at the range. Sprinco red spring with the same H3 buffer solved the problem. For some reason Pmags all locked back on a single round while a Lancer .308 would not. Stiffer metal feed lips?
    When I was battling my over-gassed .308, I found that the PMAGs would still feed but the Brownells metal mags wouldn't. After looking at the brass, it was clear that the brass was "binding" due to friction on the metal where as the polymer on the PMAG was more slippery and fed better. Obviously the whole system wasn't operating correctly, but it was interesting to see how much more friction the metal mag causes.

  7. #22
    Join Date
    Apr 2014
    Location
    Twin Cities
    Posts
    1,050
    Downloads
    2
    Uploads
    0
    I neglected to state the good Wolf Gold shooting was just at 50 yds so not as amazing as it sounded. My bad.
    “What in the world is a moderate interpretation of a constitutional text? Halfway between what it says and what we'd like it to say?" -Antonin Scalia

  8. #23
    Join Date
    Nov 2010
    Location
    FL
    Posts
    2,372
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Uffdaphil View Post
    I neglected to state the good Wolf Gold shooting was just at 50 yds so not as amazing as it sounded. My bad.
    I've actually wondered why many on the internet haven't started just shooing 1-round groups. This seems to be the ultimate way to show one's shooting prowess. Every group is sub-MOA!

  9. #24
    Join Date
    Jan 2012
    Location
    In a warm, moist environment... Usually.
    Posts
    3,431
    Downloads
    2
    Uploads
    0
    Might a little shot of dry lube help that problem? I can't say for sure, but what can it hurt? I do it to my metal mags and they're trouble-free.
    Last edited by Joelski; 23 May 2020 at 11:54.
    There's no "Team" in F**K YOU!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •