Results 1 to 9 of 9
  1. #1
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0

    What handguard for 8” barrel

    Kinda brainstorming, and havent really built anything this short yet. So say one was gonna use an 8” barrel- like the RA nitride- https://www.rainierarms.com/rainier-...de-non-fluted/

    What handguard length would be MAX for such a length if using a can, not tucked or anything but close to end.

    7.5” too close?

  2. #2
    Join Date
    Dec 2015
    Posts
    1,882
    Downloads
    0
    Uploads
    0
    I have multiple handguards (Noveske, CMT, KAC) a half inch shorter than barrel length and they fit perfectly.

    The decision is based on how far your muzzle device indexes off the barrel shoulder. My dead air mounts index far enough that the can doesn’t touch the handguard with the keymo mount.

    YMMV depending on which mount you use and how the can mounts.

    I’d measure a barrel with the mount and can of choice on it. See how much gap sits between shoulder and can. That’ll give your answer. Some cans cans go on further back and snug forward so you need to account for that too.

  3. #3
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    Good info fledge.

    I thought about whole mock up thing, but all kinds of stuff is out of stock..lol
    No 300 blackout ammo worth a shit with a quick google...fackkk
    No yhm QD mounts In stock (waiting for Kurz kits to come back in stock)

    So, just spitballing..but didn’t think about the ammo being gone..so..

  4. #4
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    As I got an extra upper and bcg (and gas block-if I replace 308 with adj. one) ..blah blah......lol...........so I figured with a incoming can I’d take advantage and build a cheap decent blackout upper for shits and giggles..

    No ammo or cases..had a 16” years ago but lost interest as no can to take advantage

  5. #5
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Make sure you get exact measurements from manufacturers you're looking at. Some 7" are actually 7.2" ect.

  6. #6
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    The Aero Precision 7" handguards are 7.25" and the BCM 7" handguards are 7.39". Either of those should work fine on an 8" barrel

  7. #7
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Name:  8B424D6B-78A7-4E6F-BD92-FE7FEEC35E43.png
Views: 1474
Size:  3.54 MB


    8.3” Ballistic Advantage 300BLK Hanson with 7.5” SLR

  8. #8
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    I need to finally get an SLR receiver set. Those are sexy.

  9. #9
    Join Date
    Sep 2013
    Location
    WA
    Posts
    4,782
    Downloads
    1
    Uploads
    0
    That’s rad..nice pistola

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •