Results 1 to 3 of 3
Thread: Scope Throw Levers
-
22 May 2009, 17:14 #1
Scope Throw Levers
Something that I just purchased. Thought I would share. Nicely built.
Custom Cat Tails by Charlie Drissel
More information can be found here:
http://www.brianenos.com/forums/index.php?showforum=194
In Production:
S&B (ShortDot, 5-25x56 PMII) in stock
Millett (1-4x24 DMS-1) in stock
NightForce NXS in stock
Leupold Vari-X III (1" and 30mm tubes) in stock
Leupold Mark 4 CQ/T in stock
Burris XTR-14 1-4x24 in stock
Weaver Classic V-3 1-3x20mm in stock
Leupold VX II 1-4x20mm in stock
Proto-Type:
In Design:
Trijicon TR24 1-4
In Bound:
Meopta K-Dot
Leupold Mark 4 3.5-10x
Trijicon TR21
In Production:
S&B (ShortDot, 5-25x56 PMII) in stock
Millett (1-4x24 DMS-1) in stock
NightForce NXS in stock
Leupold Vari-X III (1" and 30mm tubes) in stock
Leupold Mark 4 CQ/T in stock
Burris XTR-14 1-4x24 in stock
Weaver Classic V-3 1-3x20mm in stock
Leupold VX II 1-4x20mm in stock
Proto-Type:
In Design:
Trijicon TR24 1-4
In Bound:
Meopta K-Dot
Leupold Mark 4 3.5-10x
Trijicon TR21
"No free man shall ever be debarred the use of arms."
Thomas Jefferson
-
24 May 2009, 09:09 #2
He made me one too, since he didn't offer it for the VXII 1" 1-4x he made his first on my scope for $35, it took about 3 weeks.
This is my wifes 3gun rifle, aka my back up 3gun rifle.
VA Arms Co FFL/SOT armorer
certified HK-sidearms/S&W M&P/BUSHMASTER/GLOCK/SIG-Sauer LE/FNH-SCAR armorer
competitive shooter sponsored by VA ArmsCo, W.A.R. rifles, BravoCoUSA, BCM, Bobro Engineering, Magpul, Magpul Dynamics, Hatfields Gunsmithing and Greeley Custom
-
24 May 2009, 12:12 #3
It would be nice to get 2 of these for the Leupold Mark 4 LR/T 8.5-25X50 (for my long range rifles, Rem700 5R Mil Spec and a DPMS LR-308 24").
- Federalist22