Results 1 to 11 of 11
  1. #1
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0

    Colt becoming relevant for other than cloners? M5 ambi lower

    Saw this today


  2. #2
    Join Date
    Aug 2014
    Location
    Mn.
    Posts
    1,893
    Downloads
    0
    Uploads
    0
    Looks like it comes on their new rifle...
    https://www.shootingsurplus.com/colt...er-free-float/

    A little late to the party... I would like to see a pic of the other side of the receiver if anyone can find one.
    Name:  colt-cm5-sentry-556-16-m5-ambi-lower-free-float-4-1__12187.jpg
Views: 270
Size:  22.4 KB
    The best way to survive a violent encounter is to be the one inflicting the most violence.

  3. #3
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Meh. All i want from Colt is their rollmark. Well, and their SOCOM barrels.

    Looks like this lower has been in work for a while. Here is a video from 2017:



    Charlie's has a picture of the other side: https://charliescustomclones.com/col...ee-float-rail/

  4. #4
    Join Date
    Aug 2014
    Location
    Mn.
    Posts
    1,893
    Downloads
    0
    Uploads
    0
    Cool, thanks. Not very impressive compared to the LMT and LWRC ambi lowers.
    The best way to survive a violent encounter is to be the one inflicting the most violence.

  5. #5
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    A decade late to the party, but at least CZ's management appears to have turned the ship into the right direction.

  6. #6
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Kind of surprised they don’t have an integrated trigger guard and are using a magpul drop in

  7. #7
    Join Date
    Jan 2012
    Location
    On the bank of the Mighty Muskingum
    Posts
    4,029
    Downloads
    6
    Uploads
    0
    It's nice to see Colt finally embracing some evolution. Now to see if the CS can keep up, if needed.
    There's no "Team" in F**K YOU!

  8. #8
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    A look at the other side from thoroughbred armament




    In his other pics that Colt mark on the rail isn’t color filled thankfully

    16” carbine gas for the whole rifle.

    Still just want the lower

  9. #9
    Join Date
    Nov 2013
    Location
    Seattle, WA
    Posts
    2,070
    Downloads
    0
    Uploads
    0
    Doesn't look like you can lock the bolt back from the right side.

    LMT MARS-L is where it's at if you want ambi.

  10. #10
    Join Date
    Oct 2014
    Location
    SC
    Posts
    2,888
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by BoilerUp View Post
    Doesn't look like you can lock the bolt back from the right side.

    LMT MARS-L is where it's at if you want ambi.
    That’s what the button above the mag release does like on the other ambi lowers I’ve got and used

  11. #11
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    234
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Former11B View Post
    That’s what the button above the mag release does like on the other ambi lowers I’ve got and used
    That button is usually just a bolt release, though, and not a bolt lock (e.g., KAC, San Tan, etc.). The Colt spec sheet for the M5 specifically says that it's the bolt release that is ambi, rather than the bolt catch, so I suspect, like many lowers that claim to be full ambi, this one actually isn't, though it is potentially possible for them to combine that button into a dual function one, like MVB does with theirs, where it locks the bolt if the bolt is forward and drops it if it is locked back.

    I'm personally very fond of the A-DAC system that AXTS/Radian pioneered, and use the AX556 on all of my AR-15s (check out the Boonie Packer Redi-Catch if you wanna try that on a USGI lower). I think it's a cleaner system than the LMT MARS, though I'm pretty fond of my MARS-H, too, and would put it heads and shoulders above most any other system. The only other true ambi lower that catches my eye is the MVB. The ADM UIC is cool and all, but I would prefer the AX556 if billet was a choice, and the MARS over the UIC since it's forged; another great option, either way.

    I think the M5 upper is very interesting in how the handguard interfaces with the receiver. An SBR URG would be very cool, including up to 14.5"; I think the 16" is a bit weird, given that it's a carbine length system in 2022, though I'll be the first to say that it's still a viable combination.
    Last edited by Default.mp3; 18 September 2022 at 19:42.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •