Results 1 to 3 of 3
Thread: trouble installing rail system
-
17 September 2011, 21:33 #1
Member
- Join Date
- Sep 2011
- Posts
- 2
- Downloads
- 0
- Uploads
- 0
trouble installing rail system
I just got a DD free float rail to replace my rra free float. when i tighten the barrel nut it only tightens the barrel not the part the rail bolts to. Is there a deeper lug i can get to secure both or a different barrel?
-
17 September 2011, 22:23 #2
Member
- Join Date
- May 2010
- Location
- Down the rabbit hole.
- Posts
- 172
- Downloads
- 0
- Uploads
- 0
If it is a DD Lite rail... the barrel nut will not tighten anything but the barrel. The bolt up plate will move around freely until bolted up to the rail itself. Just be sure the counter bored side is facing the muzzle and you should be good to go. Once it is all bolted up it will be rock solid. I just installed a 14" rail last week and was skeptical about things tightening up too. I cannot speak about the other Daniel Defense rails. Good luck!
www.logicalprepper.com
"The most important thing about being prepared for a crisis is physical and mental fitness. It matters not how many weapons and ammo you have, or how much food you have hidden away, or what your bushcraft skills are. If you can't lug your gear to get the hell out of Dodge or if you are prone to panic... you might as well just stay there in front of the T.V. munching cheese doodles while the world falls apart." The Logical Prepper
-
18 September 2011, 00:06 #3
Member
- Join Date
- Sep 2011
- Posts
- 2
- Downloads
- 0
- Uploads
- 0
yea its a dd lite rail 9", and thanks that worked. i dont know why i didn't try that was just to worried about it being loose i guess. good to go now, appreciate it
Reply With Quote
