Results 1 to 4 of 4
Thread: BCG to Barrel question
-
24 July 2009, 10:37 #1Member
- Join Date
- Jul 2009
- Posts
- 46
- Downloads
- 0
- Uploads
- 0
BCG to Barrel question
How would I properly match a bolt to a barrel? I know some places will do it if you buy both the BCG and barrel at the same time/place, but supposing I don't, how would I match them properly?
Is it possible, does it matter? Or does it really only matter for serious competition type guns?
Please forgive my ignorance, I am in the (long) process of building and have been looking at upper components at the moment.
Thanks.
-
28 July 2009, 05:53 #2Member
- Join Date
- Jul 2009
- Posts
- 46
- Downloads
- 0
- Uploads
- 0
hrm either nobody knows or it must not matter too much.
-
28 July 2009, 07:12 #3Member
- Join Date
- Feb 2009
- Posts
- 19
- Downloads
- 0
- Uploads
- 0
i don't know much about it, but i would buy a GO and NO GO gauge to make sure the headspace is correct if i bought them separately. better safe than sorry...
ETA: http://www.larrywillis.com/gonogo.htmlLast edited by jester; 28 July 2009 at 07:14. Reason: added link
-
28 July 2009, 08:03 #4Member
- Join Date
- Mar 2009
- Location
- Florida Gulf Coast
- Posts
- 82
- Downloads
- 0
- Uploads
- 0
niner, matching the bolt doesent really matter. from what i understand, it might make about a 1/8moa or less difference on a match quality rifle. ive seen people with uppers that would shoot 1/2 or less MOA all day long and they didnt have matched bolts.