BCM Gunfighter charging handle

[m24shooter]

I've got one of each version on the way to me. I'll post some pics and start working on them when I have them in hand.

[m24shooter]

Gunfighter Mod 3 (top) and 4:



Mod 3, Mod 4, GI/PRI, GI (L to R):



Stacked Mod 3 (bottom) and 4 with GI:



Stacked 3 (middle), 4 (top), and GI/PRI (bottom):



Underside of 3, 4, and GI/PRI:



Side by side Mod 4 and GI/PRI:



Mod 4 with Matech and EOTech FTS:



Mod 3 with MBUS and XTR:





Mod 4 with ARMS 40 and ACOG:



As I work with these I'll be doing a review and posting it here.

[Policetacteam]

m24shooter,

Great pics! I like the stacked comparison pictures. I initially liked what I saw on the Bravo Company website but after seeing the pics that you took it looks even more impressive. The latch vaguely reminds me of Larue QR...flat, just the right size, and good gripping surface. I hope it functions as good as it looks!!!

[uspopo]

Thanks for the comparison pics as I was contemplating the longer Mod3 latch but I think the Mod4 version will suite my needs...

[m24shooter]

Glad you guys like them.
I've only had the handles for a short time, but I really like what they offer.
Here are a few pics with the GI/PRI and GI installed so you can see the difference when mounted.

ACOG with GI- this arrangement wasn't too bad, so I think the Mod 4 will work fine and the 3 would probably be a little much for me (I typically don't like the overly large CH latches).



PRI/GI with EOThingy FTS and Matech- worked pretty well, but this arrangement is what I bent previously. The Mod 3 is a good fit here as well.



Magpul BUS with PRI/GI and XTR- this is the arrangement that I really was wanting the Gunfighter for. The release lever on the BUS has that wing that sticks out there and partially covers/masks the PRI big weenie. For this one, I went with the Mod 3 and it looks like it will be working out.



The dogpile: