Results 1 to 6 of 6
Thread: Front MBUS adjustment.
-
15 August 2009, 18:06 #1
Front MBUS adjustment.
How do you adjust the front MBUS? The instructions say to use an A2 adjustment tool. And then there is the two small pins.
I don't want to mess around with them and mess them up because I may be returning them because they aren't working o well with my setup.
-
15 August 2009, 21:57 #2Contributing Member
- Join Date
- Nov 2008
- Posts
- 371
- Downloads
- 0
- Uploads
- 0
Adjust them like how you would adjust on any other front BUIS. You would use a A2 adjustment tool on other BUIS, or possibly some wrapped up needle nose pliers, or crushed spent casing.. what ever gets that sight to rotate. Any case the pin are to lock that sight from drifting. If you look there's a hole in the front sight where the pin will fit into. The 2 different height pins are there in case your sight is high up or really really screwed down. Once your sighted in you just insert the pins so it doesn't rotate from recoil.
-
16 August 2009, 02:33 #3
The problem I'm having is that the sight isn't rotating.
-
16 August 2009, 06:18 #4
-
16 August 2009, 09:36 #5
-
16 August 2009, 13:30 #6
Figured it out. The needle nose pliers did the trick.
Last edited by Paulo_Santos; 16 August 2009 at 14:16.