Results 1 to 15 of 44
Thread: American Defense Aimpoint Mounts
Hybrid View
-
7 November 2007, 08:32 #1
American Defense Aimpoint Mounts
Weaponevolution.com is happy to announce that American Defense Manufacturing Aimpoint mounts have now been released onto the market.
Below is the link to our initial review of the ADM mounts. LE and MIL Staff have been working with various mounts, and will provide a more detailed review as we get more time to provide updates.
http://www.weaponevolution.com/forum...?p=871#post871
We will be happy to give answers to whatever questions we can answer based on our experiences, so feel free to fire away with questions or comments.
-
7 November 2007, 09:12 #2Member
- Join Date
- Nov 2007
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
Is there any set pricing for these mounts yet? How will they compare in price to the other high-end products offered from Larue, etc? Thanks.
-
7 November 2007, 14:55 #3
Last edited by Stickman; 7 November 2007 at 14:59.
-
7 November 2007, 14:58 #4
Here is the MSRP listing, retail will probably be a few dollars less (I am guessing).
AD-68C (Aimpoint Cantilever)- $139.95.
AD-68 (Standard Aimpoint)- $109.95.
AD-68L (Low profile Aimpoint)- $109.95.
-
7 November 2007, 15:44 #5CWS1911 Guest
Nice Mounts.
What kind of safety wired covers are on the Aimpoint ?
-
7 November 2007, 16:00 #6
Those are off an early Aimpoint.
-
26 November 2007, 16:07 #7
You can see the bottom in Sticks review located here.
-
3 December 2007, 17:54 #8
That was my impression as well. Headed to the range this weekend to test out my AD-RECON on my 6.8
-
3 December 2007, 19:03 #9
is there a MSRP on the AD-Recon mount?
release date?
-
4 December 2007, 01:16 #10
Last edited by Stickman; 6 January 2008 at 00:51.
-
3 December 2007, 19:35 #11
-
5 January 2008, 12:07 #125.56 Five0 Guest
removed
Last edited by 5.56 Five0; 7 January 2008 at 05:39.
-
5 January 2008, 22:09 #135.56 Five0 Guest
removed
Last edited by 5.56 Five0; 7 January 2008 at 05:39.
-
6 January 2008, 11:03 #14
Image 1: Remove battery cover, battery, and install optic in mount.
Image 2: Reinstall battery, battery cover.
Image 3: Illustrates no clearance issues with the mount and battery cover.
-
6 January 2008, 11:23 #15
For what its worth, I am using all 6 screw GEN I ADM mounts without issue. I
had no problems orienting the rings properly, no problems torquing the screws
to the recommended 55 inch/pounds, no problems ripping out the threaded
inserts, and no problems with canting.
ADM offered GEN II replacements, which I did not take them up on simply
because the GEN I mounts work when installed as instructed.
I am however bothered by the fact that you are here complaining about
issues that you were clearly made aware of long before receiving your ADM
GEN I mount. From other threads on TOS you knew 6 screw models could be
problematic. You also knew that the rings could be accidentally oriented the
wrong way if close attention wasn't paid during installation. You also knew
that you could easily have your GEN I mount replaced at no charge to you by
simply calling ADM.
What exactly are you trying to accomplish with this post?