Results 1 to 1 of 1
-
9 April 2010, 14:18 #1
Titan Armory 6.8 Xtreme @25 yards
2 weeks ago I had the opportunity to take my Xtreme out with an optic on her to see how she shoots.
Here is a pic of the upper:
My 1st experience shooting was a miserable failure due to the fact that I couldn't hold a group at all. I figured it out after going thru a box of ammo.
I did a quick break in & all I could hit was the mountain backstop. When closing the lense caps, I noticed that the optic slid around in the mount.
Once home,off came the flip up caps & the rubber protective boot. The screws that hold the rings together were loose and allowed the Aimpoint to move in the mount.
When I mounted the Aimpoint M3 in the Larue mount,the instructions said to use the blue Loctite on the threads but I knew better & didn't.
I remounted the optic and followed the instructions by using Loctite on the ring screws. So far no more ring loosening.
This was 5 shots @ 25 yards : Aimpoint M3 no magnification : Hornady 110gr V-MAXX lot#3060657