+ Reply to Thread
Page 1 of 3
1 2 3 LastLast
Results 1 to 15 of 32
  1. #1
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

    MULTITASKER- AR15 Multi-Tools

    The Multitasker 2010 Multi-Tool Line Up




    http://www.multitaskertools.com/

  2. #2
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    In the Mulitasker M16-M4-AR15 Multi-Tool Line Up for 2010, we start off with the Multitasker Series2 Multi-Tool.




  3. #3
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    The Multitasker Series2 Multi-tool kit consists of the Series2 tool, MOLLE compatible 1000D Nylon carry pouch reinforced with an internal EVA hard-shell, and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories.




  4. #4
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    Let’s take a look at the specifics of the new Series2 Multi-Tool.

    Precision CNC machined from billet tool steel, the Series2 consists of the following:

    - Needle-Nose pliers with wire cutter jaws.

    - Non-slip G10 MaxGrip Side Panels

    - Brass shanked dental pick/scraper, which is threaded to the Series2 with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the Series2 can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

    - 2.5” long Tanto style knife blade made of 440C Stainless Steel, secured in the open position with a liner lock safety.

    - Bolt Tail and Carrier carbon scraper with a unique bent-tip radiused edge.

    - Machinist’s file with built-in 5/16” Flat-tip screwdriver.

    - 3/8” box-end wrench for adjusting LaRue optic mount tension settings.

    - Receiver Extension Castel-Nut Wrench

    - Built-In Lanyard Loop

    - Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.









  5. #5
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

  6. #6
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

  7. #7
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

  8. #8
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

  9. #9
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

    Multitasker Ultralight

    For those looking for an AR Multi-tool lighter and more compact than the Series2 shown above, comes the Multitasker Ultralight.

    The Ultralight, much like the Series2 kit, comes with a MOLLE compatible 1000D Nylon carry pouch and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories.




  10. #10
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    Let’s take a look at the specifics of the new Multitasker Ultralight Multi-Tool.

    Precision CNC machined from billet tool steel, the Ultrlight consists of the following:

    - Non-slip G10 MaxGrip Side Panels

    - Brass shanked dental pick/scraper, which is threaded to the Ultralight with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the Ultralight can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

    - Bolt Tail and Carrier carbon scraper with unique bent-tip radiused edge.

    - Receiver Extension Castel-Nut Wrench with built-in 5/16” Flat-tip screwdriver.

    - Built-In Lanyard Loop with Pocket Clip.

    - Compact and lightweight at 4.25” X 1.00” X 0.75” and 7 ounces weight.

    - Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.








  11. #11
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4










  12. #12
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

    Multitasker TUBE

    Lastly in the Multitasker M16-M4-AR15 Multi-Tool Line Up for 2010, we finish off with the Multitasker TUBE.

    The Multitasker TUBE Multi-tool kit consists of the TUBE, 1000D Nylon hard-shell storage case, and 10 each ¼” drive hex bits in sizes most commonly associated with M16-M4-AR15 accessories. The hard-shell storage case is outfitted with internal elastic straps and pockets to safely secure the accessories stored within.




  13. #13
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    Let’s take a look at the specifics of the new Multitasker TUBE Multi-Tool.

    Precision CNC machined from 6061T6 aluminum, the Multitasker TUBE consists of the following:

    - The same Bolt Tail and Carrier carbon scraper found on the Series2 and Ultralight Multi-tools, removable and interchangeable with the Brass shanked dental pick/scraper.

    - As with the Series2 and Ultralight Multi-tools, the TUBE is threaded with 8-32 male threads compatible with the OTIS brand series cleaning kit pull cable and accessories. For those utilizing the OTIS cleaning kit, the TUBE can be threaded onto the OTIS pull cable to assist in pulling the OTIS through the bore.

    - Lower Receiver Pivot Pin/Take-down Pin punch.

    - Pocket Clip which also serves as a flat-tip screwdriver.

    - Magnetic ¼” drive hex bit holder with 10 assorted hex bits to include an A2 style 4-prong Front Sight Post adjuster.




















  14. #14
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4
    The small size of the Multitasker TUBE makes it ideal as an add-on accessory to the GI cleaning kit.



  15. #15
    Join Date
    Aug 2007
    Posts
    1,582
    Downloads
    11
    Uploads
    4

    MULTITASKER TUBE IN FDE






    From Multitasker Tools LLC, comes the latest AR15 Multi-Tool about to hit the market…..the Multitasker TUBE in FDE (Flat Dark Earth).



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts