Page 1 of 2 12 LastLast
Results 1 to 15 of 27
  1. #1
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4

    IMPACT WEAPONS COMPONENTS- Mount-N-Slot Direct Attach Mounts


  2. #2
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4




    QUICK DETACH SLING MOUNTS


    • Available In Full-Rotation or Limited-Rotation Models. Limited-Rotation Quick Detach Model allows for freedom of movement, at the same time preventing sling twisting or binding.


    • Accepts heavy duty or standard push button quick detach sling swivels.


    • Ergonomic design, no sharp edges.


    • Can be mounted as a direct attachment through any cooling slot or combination of cooling slots on the MAGPUL MOE hand guard.


    • Utilizes 2 EA- 10/32” x 3/8” long Stainless Steel Socket Head Cap Screws and 2 EA- Stainless Steel #10 Washers as attaching hardware which mounts through the MAGPUL MOE hand guard cooling slots threading into the Quick Detach Sling mounting base.


    • 1/8th Allen Key Included. No additional tooling required.


    • Ultra-light: Weight 12.5 grams / .44 ounces


    • CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F


    • Easily installed by the operator. No gunsmith assistance required. Installation in no way alters the hand guard or hand guard heat shields. Easily removes to return to OEM configuration.


    • Impact Weapons 100% Lifetime Warranty. Return for full refund including shipping charges.


    • Completely Made in the USA. Materials, Tooling, Packaging.


    • MOUNT-N-SLOT™ - Made by Impact Weapons Components in Colorado USA.

  3. #3
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    The IWC Quick Detach Sling Mount comes neatly packaged in a fold out carton.

    The carton also serves to hold the included Allen Key used for tightening the mounting hardware, as well as company contact info and straightforward installation instructions.



  4. #4
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    Installation begins with removal of the mount from the packaging.



  5. #5
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    CNC machined from 6061-T6 aluminum and hardcoat anodized with a Type III matte black finish per MIL-A-8625F, the mount has very smooth lines with no sharp edges or evidence of machine marks. The interior is neatly machined away to eliminate weight, but maintain strength.

    2 EA- 10/32” x 3/8” long Stainless Steel Socket Head Cap Screws and 2 EA- Stainless Steel #10 Washers provide the means of mounting to the hand guard.



  6. #6
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    The Quick Detach Sling Mount can be mounted as a direct attachment through any cooling slot or combination of cooling slots on the MAGPUL MOE hand guard.



  7. #7
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    Installation of the mount screws is easily accomplished from the interior of the hand guard. Initial tightening of the screws is quick by accessing the screw heads through the opposite cooling slot.



  8. #8
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    Final tightening of the screws from within the interior of the hand guard.



  9. #9
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    With the mount installation complete, re-installation of the hand guards is per MAGPUL instructions.



  10. #10
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    For pricing and availability, please see Impact Weapons Components web site at:

    http://www.impactweaponscomponents.com/flash.html




  11. #11
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4

    Impact Weapons Components 360° Rotation Swivel Sling Mount




    • Accepts any Heavy Duty or Standard Sling Swivel such as the Uncle Mike’s Brand Mil-Spec or Tri-Loc Swivels.


    • Ergonomic design, no sharp edges.


    • Can be mounted as a direct attachment through any cooling slot or combination of cooling slots on the MAGPUL MOE hand guard.


    • Ultra-light MOUNT-N-SLOT™ design weighs only 36 grams (1.27 ounces)


    • CNC Machined from 303 stainless steel and 6061-T6 aluminum, hardcoat anodized Type III matte black finish per MIL-A-8625F.


    • Utilizes 2 EA- 8/32 x ˝ long Stainless Steel Socket Head Cap Screws and 2EA- Stainless Steel #8 Washers as attaching hardware which mounts through the MAGPUL MOE hand guard cooling slots threading into the Quick Detach Sling mounting base.


    • 3/32nd Allen Key Included. No additional tooling required.


    • Easily installed by the operator. No gunsmith assistance required. Installation in no way alters the hand guard or hand guard heat shields. Easily removes to return to OEM configuration.


    • Impact Weapons 100% Lifetime Warranty. Return for full refund including shipping charges.


    • Completely Made in the USA. Materials, Tooling, Packaging.


    • IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in Colorado USA.

  12. #12
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    Since the 360° Rotation Swivel Sling Mount installs identical to the Quick Detach Sling Mount pictured above, I’ll skip the installation procedures and go directly into the review of the mount.

    The 360° Swivel Sling Mount, as with all the IWC products I’ve personally seen to date or have on hand for review, exhibit a smooth finish void of machine marks or sharp edges.



  13. #13
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    Once the 360° Swivel Sling Mount was removed from the packaging, the first thing that caught my eye was the method of attachment of the sling mounting stud.

    Held secured in the base mount by a snap-ring, the sling mounting stud spins effortlessly as if on roller bearings.



  14. #14
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4
    The 360° Swivel Sling Mount as with the Quick Detach Sling Mount pictured above, can be mounted as a direct attachment through any cooling slot or combination of cooling slots on the MAGPUL MOE hand guard.












    For pricing and availability, please see Impact Weapons Components web site at:

    http://www.impactweaponscomponents.com/flash.html

  15. #15
    Join Date
    Aug 2007
    Posts
    1,584
    Downloads
    11
    Uploads
    4


    • Accepts bipods which attach to a standard sling swivel stud.


    • Ergonomic design, no sharp edges.


    • Can be mounted as a direct attachment through any cooling slot or combination of cooling slots on the MAGPUL MOE hand guard.


    • CNC Machined from 303 stainless steel and 6061-T6 aluminum, hardcoat anodized Type III matte black finish per MIL-A-8625F.


    • Utilizes 2 EA- 10/32 x ˝ long Stainless Steel Socket Head Cap Screws and 2EA- Stainless Steel #10 Washers as attaching hardware which mounts through the MAGPUL MOE hand guard cooling slots threading into the Bipod mounting base.


    • Allen Key Included. No additional tooling required.


    • NO GUNSMITHING - Mounting does not require alteration of firearm hand guard heat shields.


    • Easily installed by the operator. No gunsmith assistance required. Installation in no way alters the hand guard or hand guard heat shields. Easily removes to return to OEM configuration.


    • Impact Weapons 100% Lifetime Warranty. Return for full refund including shipping charges.


    • Completely Made in the USA. Materials, Tooling, Packaging.


    • IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS in Colorado USA.




    __________________________________________________ __________________________




    The IWC Bipod Mount shares the same method of attachment to the MAGPUL MOE hand guards, as the Sling Swivel Mounts.

    2 EA- 10/32 x ˝ long Stainless Steel Socket Head Cap Screws and 2EA- Stainless Steel #10 Washers mount through the MAGPUL MOE hand guard cooling slots, threading into the Bipod mounting base.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •