Results 46 to 57 of 57
Thread: BCM Dissipator- Yes or No?
-
17 September 2010, 09:03 #46Contributing Member
- Join Date
- Jun 2010
- Location
- Northern VA
- Posts
- 171
- Downloads
- 0
- Uploads
- 0
-
2 October 2010, 23:29 #47
it took me a long time' but i've built a dissy with a cmmg 1x7 twist barrel'
sent it to ADCO trimmed off a bunch of weight' moved gas port to mid/length. added a A.R.M.S model 41-B front sight'
boy did she wake up !
light as a feather' i used a plum crazy lower for even more weight savings.
im like everybody else' i pre-ordered a set of MOE rifle length handguards,
i have the picture of it posted on oa2.org, under weets retro israeli IDF clone.
i wanted to build the most ''usefull'' rifle/carbine i could think of'
and i wanted it as light as i could get it'
the dissy style was the only platform that fit the bill as a ''do it all'' im in love with it. :)
wishes i could post a pic here.
all i have left to do is install the H2 buffer and tubbs spring' and someday the MOE handguards.
peabody
-
3 October 2010, 16:36 #48Member
- Join Date
- Feb 2009
- Posts
- 54
- Downloads
- 0
- Uploads
- 0
-
3 October 2010, 20:47 #49
i thinks BCM will sell a bunch of them.
i really like mine.
peabody
-
16 April 2011, 13:05 #50
MOE came in, as did the IWC QD sling swivel socket.
WWW.TACTICALYELLOWVISOR.NET
-
18 April 2011, 11:15 #51Member
- Join Date
- Jan 2011
- Location
- ATL
- Posts
- 19
- Downloads
- 0
- Uploads
- 0
For those interested, CMMG sells the following-
CMMG 16 inch M10M MedCon Rifle Upper. Mid-length gas system hidden underneath a rifle length handguard, rifle length sight radius.
http://cmmginc.secure-mall.com/item/...M10M-Upper-978
They have some other dissy configurations and similar uppers in the MedCon line.
I own a CMMG upper and can't say enough good things about it. Would buy another.
I received my upper about three weeks after ordering it and this was in February of this year.
Here's a photo of my SPR CMMG upper http://imgur.com/a/8RhgR#9s4Fp
-
18 April 2011, 14:28 #52
BCM goodness in a dissipator? Oh Hell Yeah! I'm in for at least two...
If a nation expects to be ignorant and free, in a state of civilization, it expects what never was and never will be. -Thomas Jefferson
-
2 May 2011, 22:18 #53Member
- Join Date
- Apr 2010
- Location
- Redmond, Oregon
- Posts
- 22
- Downloads
- 0
- Uploads
- 0
+1 for me. BCM dissy with a LW profile BFH would be a great general purpose gun. Im 6'5'' and even the mid-length MOE handguards are a little short for me. A dissy would be perfect.
-
27 September 2011, 22:42 #54
interesting thread...
im a dissipator aholic ...
i just traded for a bushmaster dissipator barrel, rifle length sights, and carbean gas.
i.ve now 3 of the silly things, a delton rifle gas dissy, and cmmg middy gas, and now a carbean gas dissy.
whats the attraction ? i thinks its just the best ar hybrid out there, its what the M4 should have been. methinks ?
peabody
-
9 January 2012, 10:52 #55
So... time to re-liven up the old dissy thread. I'm putting together my shopping list on a build and could use a little help.
I'm looking for a drop in Front Sight Base. The ones from BCM appear F marked but not drilled and without post. The ARMS 41B looks promising but costs about $150. My usual parts source (Rainier) doesn't carry FSB's...
Does anyone know where I can locate a cheap, yet quality drop in FSB for a dissipator build? Bbl will be a 16 AAC 300 blk. If not obvious this will use a carbine gas system so the FSB doesn't need to act as a gas block, only sight.
Thanks for the help and insight!Hatter
Took a little hiatus... good to be back.
-
9 January 2012, 12:31 #56
Palmetto State Armory has them.
http://palmettostatearmory.com/1735.php
EDIT: I just realized that these aren't drilled either.Last edited by Rodman24; 9 January 2012 at 15:55.
-
5 November 2012, 18:58 #57
hummmmm ???
i trimmed down an m4 16" barrel to lightweight ...ordered a MI extended rifle length free float.
shaved down the fsb...and magpul flip ups....
another dissy is born.... :)
peabody