Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2007
    Posts
    66
    Downloads
    0
    Uploads
    0

    Geiselle Automatics install question

    I'm going to be installing a GA trigger on a POF 415 billet lower.

    I have a set of KNS anti spin pins. Should I use GA's trigger and hammer pins, or should I use KNS pins?




    thanks.

  2. #2
    Join Date
    Jun 2007
    Posts
    1,243
    Downloads
    12
    Uploads
    2
    I've used the KNS pins without issue they will work fine with the GA trigger. If your receiver is used, make sure to get the .155. Otherwise, get the .154 for new receivers. However, I recommend sticking with the pins they provide as they are a little oversized and polished.

  3. #3
    Join Date
    Oct 2007
    Posts
    66
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by John Hwang View Post
    I've used the KNS pins without issue they will work fine with the GA trigger. If your receiver is used, make sure to get the .155. Otherwise, get the .154 for new receivers. However, I recommend sticking with the pins they provide as they are a little oversized and polished.

    the lower is still stripped, I'm pretty sure I have the "small" pins. Thanks a lot!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •