Advanced Armament Corp.

[TripleBravo]

AAC had their two newest cans available for fondling at SHOT show.

The MINI 4 is a 5.56 sound suppressor that only adds 2.8 inches to the host weapon (overall length is 5.25"). It tested to reduce M193 ammo by 22 dB, but is not recommended for use on barrels less than 14.5 inches.



The 762 SND 6 is designed for the 7.62 and 300 AAC Blackout round and is 1.25 inches shorter than the 762 SD model for a total added length of 6.1 inches (overall length is 7.66 inches). It tested to reduce 7.62 by 25 dB and the 300 Blackout by 39 dB.



Both use the 51 tooth ratchet mounts

[JasonAAC]

Just to expand- the MINI4 features all-Inconel internals including the end cap. It is warranted down to full-auto on a 10" barrel. 14.5" is the shortest barrel on which it'll meter as hearing safe.

The reduction of the 762-SDN-6 with 7.62 NATO is on a KAC EMC battlerifle. Should be around 32 on longer-barreled hosts. It also makes a good multi-cal can, metering only 3-4dB louder than an M4-2000 on a 5.56 gun.

[Stickman]

Slick, thanks for the info Jason. I didn't know anything about that can until after the show was over.

[JasonAAC]

How could you have missed it Stick? they were all over. Good to met you ftf.

AAC 2011 so far:

Rimfire:
PILOT 2 - Updated PILOT is now take apart for cleaning. Same performance, same MSRP. Stainless blast baffle, rest hardcoat aluminum.

Pistol:
ECO-9 - now a production item, great deal. Compatible with pistons and mounts for the EVO-9
Ti-RANT 9 and 45 - updated for '11. Both are now fully takeapart. Same amazing performance
Ti-RANT 9 and 45 SHORT - short cans, what we make for the MIL. The 9S is hearing safe and only 5" long. The 45S is meant to be a wet can.

Rifle:
MINI4- 13.5oz, 5.25", 2.8" added. All Inconel guts, full auto rated down to 10", hearing safe on 14.5" barrel +, $895 MSRP
762-SDN-6 - shorter and quieter than the 762-SD, all Inconel guts, awesome multi-cal can.
300-SD - All-Ti 300WM can, civillian available for the frst time. New price- $1795 MSRP
Updated TITAN-SS - stainless thread on TITAN, new profile, same performance, up to .338LM, new MSRP- $1195
TiTAN-Ti - Ti thread-on, new profile, up to .338LM, MSRP $1695
TiTAN-QD - the winner of the Army's selection, fast attach, new price- $1995

Military:
MG-SD - all-inconel (monolothic core AND tube) belt-fed machine gun can

Tons of 300 BLK stuff and some exciting integrals- initially, a 10/22 and MKII. Scheduled for a Q2 release. All stainless, fully-serviceable.

[Stickman]

I think when I met with Kevin and Robert, we focused on the 300 AAC, which made sense being as I was there writing for Army Times/ Military Times. I also think they thought I had already been filled in on the other items before SHOT rolled around. When I asked about new cans, I was very nicely told by one person that I already knew about all the new products AAC had out. Not a big deal, there are a lot of times that I hear about things early in development, and other times that I find out last and everyone thought I already knew about it. This is just one of those times. Its all good.

[tac40]

While at the booth we hung out with tattoo model and AAC spokes person Rachel






Toys with shhhhh




I was told this was 300 blackout load for the modified SAW


Notice the slienced lever action.

[TripleBravo]

Thanks for the clarification, Jason.

[tac40]

video from mil-spec monkey crew