Results 1 to 3 of 3
Thread: What Buffer Do I Need?
-
22 February 2011, 10:04 #1Member
- Join Date
- Jan 2011
- Posts
- 28
- Downloads
- 0
- Uploads
- 0
What Buffer Do I Need?
Whats up guys? I am building a 5.56 with a DD CHF 16'' CL barrel and AA mid length piston system. What buffer and spring will I need. I've read and watched videos about the bolt bouncing back when you dont have the right buffer. So I thought I would come here and see what y'all say...Thanks guys!
-
22 February 2011, 10:48 #2Contributing Member
- Join Date
- Feb 2010
- Posts
- 449
- Downloads
- 0
- Uploads
- 0
Might want to check this out, I saw these the other day when ordering a .308 buffer:
http://www.heavybuffers.com/anticant.html
You should probably read this too:
http://www.weaponevolution.com/forum...t=pws+enhanced
-
22 February 2011, 19:11 #3
The high speed videos are cool, but bolt bounce issues are virtually non-existent in semi-auto fire. The fresh round is chambered and locking has occurred well before the trigger is pulled again.