Results 1 to 11 of 11
  1. #1
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0

    Comparison of the Remington 6.8 SAAMI (SPC) and SPCII Chamber Comparisons Using the LMT 6.8 SPC 16"


  2. #2
    Join Date
    Mar 2011
    Posts
    7
    Downloads
    0
    Uploads
    0
    Awesome write-up! Which chamber spec do you prefer? I have no experience with 6.8, so I'm just curious.

  3. #3
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0
    The 1:11" Twist with the SPCII Chamber. I'd prefer it have the Polygonal Rifling, Ratchet Rifling, 5R, or 4-Grooves. The 6-Groove is Ok, but not the best. The SAAMJ Chamber is not ideal for the 6.8.

  4. #4
    Join Date
    Feb 2010
    Posts
    449
    Downloads
    0
    Uploads
    0
    Paulo what about Noveske's chamber, he lists it as a Mod 1 chamber with 0.100" freebore - is this more freebore than a SAAMI spec chamber, and can his barrels shoot the SSA Tactical loads?

  5. #5
    Join Date
    Mar 2011
    Posts
    7
    Downloads
    0
    Uploads
    0
    Thanks for the info, Paul. Are there any manufacturers in particular that offer what you recommended?

  6. #6
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by AR-10 View Post
    Paulo what about Noveske's chamber, he lists it as a Mod 1 chamber with 0.100" freebore - is this more freebore than a SAAMI spec chamber, and can his barrels shoot the SSA Tactical loads?
    For all intensive purposes, the noveske is basically the SPCII. Noveske barrels are definitely some of the best on the market and can handle all of the hot loads.

  7. #7
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by OffHot View Post
    Thanks for the info, Paul. Are there any manufacturers in particular that offer what you recommended?
    Check out the Chart below:

    http://spreadsheets.google.com/pub?k...yg&output=html

  8. #8
    Join Date
    Mar 2011
    Posts
    7
    Downloads
    0
    Uploads
    0
    Of course, there is a chart for everything! Thanks.

  9. #9
    Join Date
    Feb 2010
    Posts
    449
    Downloads
    0
    Uploads
    0
    Cool, good to know.

    I was toying around with the idea of a 6.8 SBR a while ago but it never materialized.

    In your opinion, what would be the ideal barrel length if you wanted to build a shorty?

  10. #10
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by AR-10 View Post
    Cool, good to know.

    I was toying around with the idea of a 6.8 SBR a while ago but it never materialized.

    In your opinion, what would be the ideal barrel length if you wanted to build a shorty?

    12.5"

  11. #11
    Join Date
    Jan 2008
    Location
    CA & WA
    Posts
    1,162
    Downloads
    0
    Uploads
    0
    Good info Paulo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •