Results 1 to 3 of 3
Thread: Leica CRF 1600 Hard Case
-
14 July 2011, 23:32 #1Member
- Join Date
- Apr 2009
- Location
- Medford, OR
- Posts
- 117
- Downloads
- 0
- Uploads
- 0
Leica CRF 1600 Hard Case
Just FYI, I found that the Tactical Tailor Universal Hardcase 75 to be a perfect fit.
The rubber eye cup might take a slight set if left over time but will not interfere with function IMO. The RF slips in and out smoothly, but leaving the neck cord wrapped as shown makes the job easier.
I did glue a piece of 3/8" padding to the lid which removed the slight movement it has while shaking the case.
-Jim @ DVCguns.com
-
15 July 2011, 00:11 #2
Nice, I've got a few of their cases also. They are well made.
-
29 August 2011, 12:09 #3Member
- Join Date
- Apr 2009
- Location
- Medford, OR
- Posts
- 117
- Downloads
- 0
- Uploads
- 0
Just an update after several trips to the field. I found that the padding made the fit a hair too tight for inserting and removing all the time so I peeled it off the sides and stuck it in the bottom of the case for an end pad. The LRF is easier to insert/remove now and there is no shaking around or noise making as the fit is still close.
-Jim @ DVCguns.com