Page 3 of 9 FirstFirst 12345 ... LastLast
Results 31 to 45 of 128
  1. #31
    Join Date
    Oct 2007
    Posts
    32
    Downloads
    0
    Uploads
    0
    We were just talking about a light mount.

    It is on the board.

    Any particular features that you would like to see?

  2. #32
    Join Date
    Aug 2007
    Posts
    158
    Downloads
    2
    Uploads
    0
    Any requests? The more specific the better.
    Pretty sure its already on the whiteboard, but either way I'll throw 'em out there:

    1. Cantilever Aimpoint mount ( both M3 & M4 models ).
    -- Must extend the Aimpoint 1" beyond the mount base ( over the rail ).

    2. 3x Magnifier mount ( both fixed & flip to side )
    -- Must work identically for both left and right handed individuals.
    -- Must clear a rear BUIS and cantilever mount on the upper.

    3. Scope Mounts ( both standard & extended eye relief )
    -- Swappable rings might be a good idea to accomodate both 30mm & 35mm optics such as IOR.

    If you need any specifics regarding height, location, dimensions feel free to ask. My calipers are always within arms reach.

  3. #33
    Join Date
    Dec 2007
    Location
    NJ
    Posts
    1,648
    Downloads
    0
    Uploads
    0
    EOTech QD mount. Like the GG&G ACCUCAM

  4. #34
    Join Date
    May 2008
    Posts
    3
    Downloads
    0
    Uploads
    0
    I would really like to see a Surefire X300 mount that would make it conveniently compatible with your verticle foregrip and not interfere with the bipod.

  5. #35
    Join Date
    Jun 2007
    Posts
    5,551
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by paulosantos View Post
    EOTech QD mount. Like the GG&G ACCUCAM
    I think thats a solid idea as well. The market is pretty small in the Eotech arena, both a riser, and non-riser version would probably be of interest to people.

  6. #36
    Join Date
    Oct 2007
    Posts
    32
    Downloads
    0
    Uploads
    0
    This is great input.

    We are making sub lists for each interface.

  7. #37
    Join Date
    Oct 2007
    Posts
    32
    Downloads
    0
    Uploads
    0
    We have been shipping units for our Tier 1 Evaluation.

    You will be seeing Evaluation reports from numerous sources.

    We are developing the BLAC with maximum input from established and highly experienced users. We have been submitting units to Civilians, Law Enforcement, and top of the foodchain Military.

  8. #38
    Join Date
    Jun 2007
    Posts
    5,551
    Downloads
    0
    Uploads
    0
    Short of abusing the heck of of the Aimpoint Comp M4, there isn't much else to test on this end. It works over and over and over, and it doesn't matter what rail its put on.

  9. #39
    Join Date
    Aug 2007
    Posts
    158
    Downloads
    2
    Uploads
    0
    It works over and over and over, and it doesn't matter what rail its put on.
    Couldn't agree more.

    I ran the prototype hard. Extremely hard and got nothing but consistent results.

    I believe my exacts words when describing my first session out with it were
    "It was exceptionally boring".

    I removed and replaced it more times than I care to count. Each time I removed
    and replaced it with one handed operation with zero regard for re-indexing it to
    a given t-slot. Each time to results were the same. It retained zero - period.

    My initial results were so expected that the entire session was redundant to
    the point of boredom. Which of course is a good thing and something that
    everyone should expect from a quality optic mount.

    I am anxious to receive my production mount to expand my testing to include
    exposing the lever mechanism to dust & sand as well as to determine if the
    throw lever orientation / placement will effect performance when worn over
    full kit.

    Pictures and a full writeup to follow.

  10. #40
    Join Date
    Jul 2007
    Location
    Idaho
    Posts
    33
    Downloads
    0
    Uploads
    0
    Who do I need to suckle to get one of these?

    Todd

  11. #41
    Join Date
    Sep 2007
    Location
    NoVA
    Posts
    76
    Downloads
    0
    Uploads
    0
    I got mine installed on my Colt, it's a damn ingenious design!

    No manual adjustment needed, I've tried it on 6 different ARs and it's locks down solidly on all of them.



    VA Arms Co FFL/SOT armorer
    certified HK-sidearms/S&W M&P/BUSHMASTER/GLOCK/SIG-Sauer LE/FNH-SCAR armorer
    competitive shooter sponsored by VA ArmsCo, W.A.R. rifles, BravoCoUSA, BCM, Bobro Engineering, Magpul, Magpul Dynamics, Hatfields Gunsmithing and Greeley Custom

  12. #42
    Join Date
    Aug 2007
    Posts
    158
    Downloads
    2
    Uploads
    0
    Image 1: Bobro Aimpoint CompM4 BLAC Mount Installed



    Image 2: Quick Release lever after 500 compression / decompression cycles



    Image 3: Detail image of the BLAC underside



    Image 4: Another detail image of the BLAC underside


  13. #43
    Join Date
    Feb 2008
    Posts
    129
    Downloads
    0
    Uploads
    0
    Thanks, for the pics. Looks nice.
    What can one man do? You never know until you try.

  14. #44
    Join Date
    Oct 2007
    Posts
    32
    Downloads
    0
    Uploads
    0


    This is a production run of BLAC Main Bodies, we are making various sizes to account for different setups. The bases are modular.




    Beach sand function test.

  15. #45
    Join Date
    Jun 2007
    Posts
    5,551
    Downloads
    0
    Uploads
    0
    I ran another training day with it yesterday, nothing exciting, it came on and off, repeated zero, over and over....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •