300 Blackut Help?

[Leo77]

Im trying to build an Absolute Top of the Line SBR. Regardless of Cost!!
Would you Recommend the LMT Enhanced BCG, Les Baer BCG, Young BCG or the Noveske BCG?

Also what Gas Block would you Recommend, the PRI Gas Block or Noveske's?
Thanks Much, I appreciate the Advice.

[The-S]

I love my young BCG's

[todd.k]

The LMT enhanced carrier is made for 14.5"-16" carbine gas system barrels. I would stick with a standard MIL-SPEC type BCG from Colt, LMT, BCM, or us.

The gas block does not matter as long as the holes are the right diameter and it's installed correctly. I designed our gas block with the correct offset for use without a handguard cap, so it doesn't have to be spaced out from the shoulder.

[Leo77]

I have also heard good things about the Young BCG.
Thanks for the Advice Todd.
I wish Stick would also Chime In!!

[TehLlama]

The only reason to select an LMT BCG is if you're trying to deliberately bleed gas from the operating system.

I'd stick with a basic BCG, maybe look at chrome or ionbond DLC, but all of the supposedly tighter BCG's aren't going to matter on an SBR - BCM, DD, LMT, Colt, or an MPI CMT is where I'd be looking.

[Stickman]

May as well just go with Noveske with both, and know you've got good stuff.